
Precharge
sebgothard/FS_Electronics
Projects for Formula Student UK competition 2024-25.

Projects for Formula Student UK competition 2024-25.
Precharge.old is an open-source printed circuit board by sebgothard, from the sebgothard/FS_Electronics repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 64.8 × 65.5 mm with 38 parts on 28 nets, routed with 196 tracks and 35 vias.
It is built around the PESE1-S12-S5-M-TR, ACPL-C87A-500E and IMB06IGR. Its parts include 11 resistors, 6 connectors, 4 capacitors, 3 ICs and 3 transistors.
Hardware projects for Formula Student UK competition 2024-25.
💻Github https://github.com/sebgothard/FS_Electronics
A device to charge the tractive system such that the battery voltage doesn't damage the internals of the inverter.
The precharge module.
A device to discharge the tractive system, specifically a capacitor in the inverter.
The discharge module.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 100nF | Capacitor_SMD:C_0805_2012Metric | C3, C4, C5, C6 |
| 3 | 1K | Resistor_SMD:R_0805_2012Metric | R19, R20, R22 |
| 2 | 11K | customFootprints:RC2512N_VIS | R2, R5 |
| 2 | 187K | customFootprints:RC2512N_VIS | R1, R4 |
| 2 | 1K | customFootprints:RC2512N_VIS | R3, R6 |
| 2 | ACPL-C87A-500E | customFootprints:SOIC127P1150X361-8N | U1, U2 |
| 2 | LOGO | customFootprints:electric-shock-symbol | G***, G*** |
| 2 | PESE1-S12-S5-M-TR | customFootprints:SMD5_12.75X10.7X6.7_SINGLE_RCP | PS1, PS2 |
| 2 | SQ2362 | customFootprints:SOT95P237X112-3N | Q2, Q3 |
| 1 | 10K | customFootprints:GULLWING24_VIS | RN10K1 |
| 1 | 15K | customFootprints:PWR263S-35-1002F_BRN | R21 |
| 1 | 9K7 | Resistor_SMD:R_0805_2012Metric | R14 |
| 1 | AIR_CONN | molexMiniFitJr:MFJ_2X1 | J1 |
| 1 | AM2328NE | customFootprints:SOT95P237X112-3N | Q1 |
| 1 | CAP_CONN | customFootprints:APP_ASMPR45-1X2-RK | J6 |
| 1 | HV_CONN | customFootprints:APP_ASMPR45-1X2-RK | J5 |
| 1 | IMB06IGR | customFootprints:IMB03IGR | K1 |
| 1 | LV_CONN | molexMiniFitJr:MFJ_2X1 | J4 |
| 1 | MC34074ADR2G | customFootprints:SOIC127P600X175-14N | U3 |
| 1 | TSAL_CONN_AIR | molexMiniFitJr:MFJ_2X1 | J2 |
| 1 | TSAL_CONN_LV | molexMiniFitJr:MFJ_2X1 | J3 |
The 33 most common of 38 parts.


joeycastillo/The-Open-Book
For details on how to build, test and use Open Book, I've made documentation available here.


hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!


Ardumower/ardumower
Develop an open source robotic lawn mower (HW+SW reference platform)

CRImier/MyKiCad
My KiCad boards. Can't be bothered uploading individually anymore, so here you go.

It measures 64.8 × 65.5 mm and has 2 copper layers, 1.6 mm thick.
38 parts, built around the PESE1-S12-S5-M-TR, ACPL-C87A-500E and IMB06IGR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the sebgothard/FS_Electronics repository on GitHub, at the commit this page was made from: the board is Precharge/precharge.old.kicad_pcb and its schematic Discharge/discharge.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).