
Controller
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

keep 18650 shield 5v rail on
18650 keep alive is an open-source printed circuit board by sdp8483, from the sdp8483/18650_keep_alive repository on GitHub, published under the MIT licence. It is a 2-layer board of 19 × 14.3 mm with 11 parts on 7 nets, routed with 24 tracks and 0 vias.
Its parts include 5 resistors, 4 connectors, 1 IC and 1 transistor.
The following circuit was designed to keep the 5V rail of a 18650 Battery Shield active even with no load attached. A comparator will "press" the tactile switch when the 5V rail goes below the 3V3 rail.

The circuit is built on a small one sided PCB that is attached to the battery shield using hot glue. Electrical connections are made using multi-strand wire.

Below is a photo of an unmodified 18650 Battery Shield. They may use keywords such as ESP32 or Raspberry Pi battery shield.

| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 100k | Resistor_SMD:R_0805_2012Metric | R1, R2, R3, R4, R5 |
| 4 | PAD | TestPoint:TestPoint_Pad_2.5x2.5mm | J1, J2, J3, J4 |
| 1 | BSS806N | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | MIC7221 | Package_TO_SOT_SMD:SOT-23-5 | U1 |

google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards


FrameworkComputer/ExpansionCards
Reference designs and documentation to create Expansion Cards for the Framework Laptop

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!


tardate/LittleArduinoProjects
a collection of "Little Electronic & Arduino Projects", most involving electronics or an Arduino in one way or another!

basilfx/TRADFRI-Hacking
Hacking IKEA TRÅDFRI products, such as light bulbs, window blinds and other accessories.
It measures 19 × 14.3 mm and has 2 copper layers, 1.6 mm thick.
11 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the sdp8483/18650_keep_alive repository on GitHub, at the commit this page was made from: the board is pcb/18650_keep_alive.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).