Skip to the content
2 layers66.1 × 60 mmSd1, the printed circuit board in 3D
Size
66.1 × 60 mm
Copper layers
2
Thickness
1.6 mm
Parts
14
Nets
70
Pads
144
Tracks, vias
428, 54
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
25 Aug 2025
Updated
12 Sep 2025

Overview

Sd1 is an open-source printed circuit board by SD-SPUD, from the SD-SPUD/spud-pcb repository on GitHub. It is a 2-layer board of 66.1 × 60 mm with 14 parts on 70 nets, routed with 428 tracks and 54 vias.

It is built around the TXS0108EPW. Its parts include 4 capacitors, 2 resistors and 1 diode.

Main components

1

README

README.md

spud-pcb

Parts

14
QtyValueFootprintReferences
40.1uFCapacitor_SMD:C_0805_2012MetricC1, C2, C3, C4
210kResistor_SMD:R_0805_2012MetricR1, R2
2TXS0108EPWPackage_SO:TSSOP-20_4.4x6.5mm_P0.65mmLS1, LS2
2~Connector_PinHeader_2.54mm:PinHeader_2x08_P2.54mm_VerticalBOTTOM_RIGHT_HEADERS1, TOP_LEFT_HEADERS1
1Conn_02x06_Top_BottomConnector_PinHeader_2.54mm:PinHeader_2x06_P2.54mm_VerticalARCADE_PCB_CONN1
1Conn_02x08_Odd_EvenConnector_PinHeader_2.54mm:PinHeader_2x08_P2.54mm_VerticalLED1
1~Connector_PinHeader_2.54mm:PinHeader_2x06_P2.54mm_VerticalBOTTOM_LEFT_HEADERS1
1~Connector_PinHeader_2.54mm:PinHeader_2x10_P2.54mm_VerticalTOP_RIGHT_HEADERS1

More from SD-SPUD/spud-pcb

1
  • 2 layers203.5 × 152.3 mmController, the printed circuit board in 3D

    Controller

    SD-SPUD/spud-pcb

    26 parts1

Similar boards

  • 4 layers68.6 × 53.3 mmIcezum, the printed circuit board in 3D

    Icezum

    FPGAwars/icezum

    :star2: IceZUM Alhambra: an Arduino-like Open FPGA electronic board

    218 parts357GPL-3.0
  • 2 layers94.5 × 74.4 mmAx58100-stm32-ethercat, the printed circuit board in 3D

    Ax58100-stm32-ethercat

    MetalMusings/MyOwnEtherCATDevice

    Documentation accompanying the "Make My Own EtherCAT device" video serie on Youtube.

    184 parts93
  • 4 layers80 × 100 mmBaseboard, the printed circuit board in 3D

    Baseboard

    NVIDIA-AI-IOT/my-jetson-nano-baseboard

    An open source Jetson Nano baseboard and tools to design your own.

    240 parts91
  • 4 layers80 × 73.8 mmESP32-Bit Pirate Dock, the printed circuit board in 3D

    ESP32-Bit Pirate Dock

    AndreiVladescu/ESP32-Bit-Pirate-Hardware

    Carrier breaker-board for the ESP32-S3 Devkit. Works great with the ESP32-Bit-Pirate firmware.

    49 parts85CERN-OHL-W-2.0
  • 4 layers42.8 × 36.8 mmDriver board, the printed circuit board in 3D

    Driver board

    blazer82/FT81x_Arduino_Driver

    FT81x on ST7701S Arduino Driver

    49 parts59MIT
  • 2 layers81.3 × 30.9 mmISABlaster, the printed circuit board in 3D

    ISABlaster

    scrapcomputing/ISABlaster

    A software-defined ISA card powered by a Raspberry Pi Pico

    24 parts53GPL-2.0
  • 4 layers29 × 50.3 mmToshiba hvac esp32, the printed circuit board in 3D

    Toshiba hvac esp32

    florianbrede-ayet/esphome-toshiba-hvac-controller

    ESPhome component & hardware to control Toshiba & Carrier HVAC units with WIFI interface

    7 parts38MIT
  • 4 layers65 × 100 mmUBMS-2, the printed circuit board in 3D

    UBMS-2

    grokicad/grokicad

    Grok powered schematic intelligence for your kicad repositories

    246 parts28

Questions

How big is the Sd1 PCB?

It measures 66.1 × 60 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Sd1 use?

14 parts, built around the TXS0108EPW. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Sd1 KiCad files?

From the SD-SPUD/spud-pcb repository on GitHub, at the commit this page was made from: the board is main pcb/sd1.kicad_pcb and its schematic arcade controller/controller.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Sd1 design in my own project?

Its repository states no licence, so its author keeps all rights: ask SD-SPUD before reusing the design.