2 layers98 × 27 mm
2 layers18.4 × 43.8 mm
NanoFan
scyomantion/NanoFan28A custom fan controller for HP D2600 based on Arduino Nano
- Size
- 18.4 × 43.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 5
- Nets
- 10
- Pads
- 46
- Tracks, vias
- 47, 2
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 27 Aug 2020
- Updated
- 14 Sep 2020
Overview
NanoFan is an open-source printed circuit board by scyomantion, from the scyomantion/NanoFan repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 18.4 × 43.8 mm with 5 parts on 10 nets, routed with 47 tracks and 2 vias.
It belongs with the AVR (ATmega, ATtiny) boards of this library.
README
README.mdNanoFan
A custom fan controller for HP D2600 based on Arduino Nano
It is a header for Arduino Nano. You connect the fans with the header and the header with the old fan plugs so that the Arduino acts like a man in the middle.
The original fans could be controlled by a pwm signal and there is a fake rpm signal sent to the original controller.
Disclaimer
I'm not responsible for anything that happens by building or using this project
Images
BOM
You need following per fan controller:
-
1x Arduino Nano
-
2x JUMPER 04KR-6S-P - 04KR-6S-P 2" (PN: A04KR04KR26E51B)
-
4x B4B-PH-K-S(LF)(SN)
-
1x PCB from this project
Impressum
Parts
5| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | Conn_01x04_Male | Connector_JST:JST_PH_B4B-PH-K_1x04_P2.00mm_Vertical | J1, J2, J3, J4 |
| 1 | Arduino_Nano_v3.x | Module:Arduino_Nano | A1 |
Similar boards
- 2 layers21 × 33 mm
24g2usb pico2w
joypad-ai/joypad-os
Universal controller firmware for building adapters, dongles, and custom controllers.
5 parts1.7kApache-2.0 - 2 layers53.2 × 59.6 mm
A10 OLinuXino Lime Rev B SHIELD TEMPLATE
OLIMEX/OLINUXINO
OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C
5 parts1.5k - 2 layers30 × 11 mm
Main control board servo tester
jamro/tiny-engineer
A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.
5 parts1.1k - 2 layers78.8 × 35.3 mm
KiCadTest
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
5 parts915 - 2 layers50 × 23 mm
- 2 layers43.2 × 28.5 mm
- 2 layers20.3 × 15.2 mm
L0 light sensor
Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.
5 parts546MIT
Questions
How big is the NanoFan PCB?
It measures 18.4 × 43.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the NanoFan use?
5 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the NanoFan KiCad files?
From the scyomantion/NanoFan repository on GitHub, at the commit this page was made from: the board is PCB/NanoFan.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the NanoFan design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).