4 layers315 × 147.2 mm
2 layers314.4 × 104.3 mm
SCO68R
scottcjx/SCO68R- Size
- 314.4 × 104.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 197
- Nets
- 120
- Pads
- 719
- Tracks, vias
- 1,043, 113
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 19 Jul 2022
- Updated
- 23 Jul 2022
Overview
SCO68R is an open-source printed circuit board by scottcjx, from the scottcjx/SCO68R repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 314.4 × 104.3 mm with 197 parts on 120 nets, routed with 1,043 tracks and 113 vias.
It is built around the AMS1117-3.3, TPD4E05U06DQAR and 1N4148W, with the SK6812MINI-E and BSS138 among its other parts. Its parts include 72 diodes, 22 capacitors, 14 resistors, 3 ICs and 2 connectors. It belongs with the STM32 boards of this library.
Main components
5
AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
TPD4E05U06DQAR
USON-10-40℃~+125℃ 0.5pF 10nA 14V 2.5A@8/20us 40W@8/20us 5.5V 6.5V ESD Four channels IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 Unidirectional USON-10(1x2.5) ESD and Surge Protection (TVS/ESD) ROHSTexas InstrumentsESD Protection Devices
1N4148W
SOD-123150mA 1A 1V@50mA 1uA@75V 400mW 4ns 75V Independent SOD-123 Switching Diodes ROHSSTMicroelectronicsSwitching Diodes
SK6812MINI-E
SMD-40℃~+85℃ 0.6mA 1.78mm 120mcd~240mcd 120° 160mcd~320mcd 1kHz 2.8mm 2000V 3.2mm 3.7V~5.5V 460nm~470nm 515nm~525nm 620nm~625nm 800Kbit/s 815mcd~1275mcd Semi-transparent lens SMD RGB LEDs(Built-in IC) ROHSOPSCO OptoelectronicsRGB LEDs(Built-In IC)
BSS138
SOT-23-55℃~+150℃ 1 N-channel 1.1Ω@10V、1.2Ω@4.5V 1.2V 1.7nC@10V 17.5pF 340mA 350mW 50V 6.5pF N-Channel SOT-23 MOSFETs ROHShongjiachengMOSFETs
README
README.mdSCO68R
Parts
197| Qty | Value | Footprint | References |
|---|---|---|---|
| 68 | 1N4148W | Diode_SMD:D_SOD-123 | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +52 |
| 68 | Keyswitch_&_Diode | 0SCO_LIB:1.00U_MX-MILLMAX_3305 | KSW1, KSW2, KSW10, KSW11, KSW12, KSW13, KSW14, KSW15, KSW16, KSW17, KSW18, KSW19, KSW20, KSW21, KSW22, KSW23 +52 |
| 17 | 100nF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C6, C7, C8, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22 +1 |
| 10 | 5k1 | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R2, R3, R7, R8, R9, R10, R11, R12, R13, R14 |
| 4 | EC11_RotaryEnc | Rotary_Encoder:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | KSWR1, KSWR2, KSWR3, KSWR4 |
| 3 | 10k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R1, R5, R6 |
| 3 | SK6812MINI | LED_SMD:LED_SK6812MINI_PLCC4_3.5x3.5mm_P1.75mm | D69, D70, D71 |
| 2 | 10pF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C4 |
| 2 | 22uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C2 |
| 2 | LOGO | 0SCO_LIB:logo_1 | G***, G*** |
| 2 | SW_MEC_5E | TS-1187A-B-A-B Switch:SW_TS-1187A-B-A-B | SW1, SW2 |
| 1 | 10uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C5 |
| 1 | 16MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm_HandSoldering | Y1 |
| 1 | 1k5 | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R4 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | BSS138 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | Conn_02x04_Row_Letter_First | Connector_PinHeader_2.54mm:PinHeader_2x04_P2.54mm_Vertical | J2 |
| 1 | D_TVS | Diode_SMD:D_SOD-123F | D100 |
| 1 | Polyfuse | Fuse:Fuse_1206_3216Metric_Pad1.42x1.75mm_HandSolder | F1 |
| 1 | STM32F103C8Tx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U3 |
| 1 | TPD4E05U06DQAR | TPD4E05U06DQAR:TI_TPD4E05U06DQAR | U2 |
| 1 | USB C | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
The 192 most common of 197 parts.
Similar boards
- 2 layers339.1 × 143.2 mm
- 2 layers353.1 × 124.9 mm
- 2 layers32.2 × 44 mm
- 2 layers241.6 × 71.7 mm
- 2 layers440 × 150 mm
- 4 layers89.6 × 90 mm
- 2 layers0.7 × 0.5 mm
Questions
How big is the SCO68R PCB?
It measures 314.4 × 104.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the SCO68R use?
197 parts, built around the AMS1117-3.3, TPD4E05U06DQAR, 1N4148W and SK6812MINI-E. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the SCO68R KiCad files?
From the scottcjx/SCO68R repository on GitHub, at the commit this page was made from: the board is HDK/SCO68R/SCO68-4R_REV1-0/SCO68R.kicad_pcb and its schematic HDK/SCO68R/SCO68-4R_REV1-0/SCO68R.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the SCO68R design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).