

Soldering Station
- Size
- 85 × 48 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 23
- Nets
- 35
- Pads
- 93
- Tracks, vias
- 111, 3
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 2 Oct 2022
- Updated
- 2 Oct 2022
Overview
Soldering Station is an open-source printed circuit board by scottcjx, from the scottcjx/DIY-Soldering-Station repository on GitHub, published under the MIT licence. It is a 2-layer board of 85 × 48 mm with 23 parts on 35 nets, routed with 111 tracks and 3 vias.
It is built around the LM358, BAT54C and IRLZ44N. Its parts include 9 connectors, 4 resistors, 2 diodes, 1 capacitor and 1 IC. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
3LM358
SOP-8-18V~18V 0℃~+70℃ 1.2MHz 10nA 2 24mA 3V~36V 500uA 50nA 5mV 80dB Built-in compensation SOP-8 Operational Amplifier ROHSMSKSEMIOperational AmplifierBAT54C
SOT-231 Pair Common Cathode 200mA 2uA@25V 30V 600mA 800mV@100mA SOT-23 Schottky Diodes ROHSNexperiaSchottky DiodesIRLZ44N
TO-22055V 47A N-Channel HEXFET® Power MOSFETInfineon TechnologiesUncategorised
README
README.mdDIY-Soldering-Station
Parts
23| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J101, J102, J106, J107 |
| 2 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J104, J105 |
| 1 | 10k | Resistor_SMD:R_2512_6332Metric_Pad1.40x3.35mm_HandSolder | R103 |
| 1 | 1N4007 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D101 |
| 1 | 2k7 | Resistor_SMD:R_2512_6332Metric_Pad1.40x3.35mm_HandSolder | R104 |
| 1 | 3k3 | Resistor_SMD:R_2512_6332Metric_Pad1.40x3.35mm_HandSolder | R102 |
| 1 | 470 | Resistor_SMD:R_2512_6332Metric_Pad1.40x3.35mm_HandSolder | R101 |
| 1 | 470uF | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | C101 |
| 1 | Arduino_Nano_v3.x | Module:Arduino_Nano | A101 |
| 1 | BAT54C | Package_TO_SOT_SMD:SOT-23 | D102 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J108 |
| 1 | Conn_01x04 | Z_custom_parts:DSUN-BUCKCONV | J110 |
| 1 | Conn_01x05 | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J109 |
| 1 | IRLZ44N | Package_TO_SOT_THT:TO-220-3_Horizontal_TabDown | Q101 |
| 1 | LM358 | Package_DIP:DIP-8_W7.62mm | U101 |
The 19 most common of 23 parts.
Similar boards
- 2 layers80 × 90 mm

- 4 layers70 × 80 mm

- 2 layers302.9 × 134.3 mm

- 4 layers58 × 90 mm

Logging
matatma23-gento/embedded-portfolio
This repository collects KiCad hardware design projects. Project specifications, validation results, and individual contributions are being documented; the presence of design files does not imply production readiness or…
76 parts - 2 layers100 × 100 mm

- 2 layers65 × 40 mm

- 2 layers146.6 × 113.5 mm

- 2 layers151 × 118 mm

Questions
How big is the Soldering Station PCB?
It measures 85 × 48 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Soldering Station use?
23 parts, built around the LM358, BAT54C and IRLZ44N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Soldering Station KiCad files?
From the scottcjx/DIY-Soldering-Station repository on GitHub, at the commit this page was made from: the board is HDK/Soldering Station.kicad_pcb and its schematic HDK/Soldering Station.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Soldering Station design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).