Skip to the content
2 layers45.7 × 32.5 mmRflego termination, the printed circuit board in 3D

Rflego termination

schusjon/rf_module_chain1

The output is implemented as a female SMA receptacle.

Size
45.7 × 32.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
36
Nets
55
Pads
184
Tracks, vias
357, 58
Pours
4
Routed
Yes
KiCad
KiCad 4
Created
12 Jul 2018
Updated
12 Jan 2019

Overview

Rflego termination is an open-source printed circuit board by schusjon, from the schusjon/rf_module_chain repository on GitHub. It is a 2-layer board of 45.7 × 32.5 mm with 36 parts on 55 nets, routed with 357 tracks and 58 vias.

Its parts include 17 resistors, 7 diodes, 7 connectors, 4 capacitors and 1 IC. It belongs with the STM32 boards of this library.

README

module_termination/README.md

Termination Module

The termination/end module includes status LEDs to check the power busses and the link status of the chain. Two of them are controlled by the uC and are user programmable. The two additional RF signals, REF and AUX are terminated on the module with 50 ohms.

The output is implemented as a female SMA receptacle.

The prototype carries its own 3.3V LDO due to the critical role of the embedded processor. This last link in the chain reorganizes all data received from preceding modules and transmits them to the control computer. This individual power supply could have offered additional debugging and troubleshooting information but was deemed unnecessary in early test and was therefore omitted from later designs.

Further development could include an automated power supply check: A passive resistor network of voltage dividers and pullups should be enough to generate an unambiguous digital pattern that would enable the uC to read the status of the connected supplies.

Alt-Text

Parts

36
QtyValueFootprintReferences
8RResistors_SMD:R_0603_HandSolderingR6, R7, R8, R9, R10, R11, R12, R13
5Conn_01x01Pin_Headers:Pin_Header_Straight_1x01_Pitch2.54mmJ3, J4, J5, J6, J7
4100nCapacitors_SMD:C_0603_HandSolderingC5, C6, C7, C8
3LED grünLEDs:LED_0603_HandSolderingD3, D5, D7
3LED rotLEDs:LED_0603_HandSolderingD2, D4, D6
21kResistors_SMD:R_0603_HandSolderingR4, R5
2300Resistors_SMD:R_0603_HandSolderingR2, R3
250Resistors_SMD:R_0603_HandSolderingR16, R17
1110Resistors_SMD:R_0603_HandSolderingR14
1120Resistors_SMD:R_0603_HandSolderingR1
1130Resistors_SMD:R_0603_HandSolderingR15
1Conn_CoaxialConnector_PCIx1:CONSMAEDGE_ohne_DruckJ1
1LED gelbLEDs:LED_0603_HandSolderingD1
1PCIx136pConnectors:PCI-EXPRESSJ2
1STM32-48PINuC:LQFP-48_7x7mm_Pitch0.5mmU2

More from schusjon/rf_module_chain

2
  • 2 layers47.4 × 27.5 mmRflego start, the printed circuit board in 3D

    Rflego start

    schusjon/rf_module_chain

    The output is implemented as a female SMA receptacle.

    36 parts1
  • 2 layers54.4 × 35.7 mmRflego t att, the printed circuit board in 3D

    Rflego t att

    schusjon/rf_module_chain

    The output is implemented as a female SMA receptacle.

    21 parts1

Similar boards

  • 2 layers65 × 30 mmRgb to hdmi, the printed circuit board in 3D

    Rgb to hdmi

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    36 parts1kGPL-3.0
  • 2 layers55 × 70 mmArduino v1, the printed circuit board in 3D

    Arduino v1

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    36 parts915
  • 2 layers50.4 × 24.8 mmLEDboardRev3, the printed circuit board in 3D

    LEDboardRev3

    Architeuthis-Flux/Jumperless

    A jumperless breadboard

    36 parts914
  • 2 layers45.7 × 31.8 mmLEDx16 board, the printed circuit board in 3D

    LEDx16 board

    tardate/LittleArduinoProjects

    a collection of "Little Electronic & Arduino Projects", most involving electronics or an Arduino in one way or another!

    36 parts803MIT
  • 2 layers32 × 24 mmEsp onelayer3, the printed circuit board in 3D

    Esp onelayer3

    cnlohr/colorchord

    Chromatic Sound to Light Conversion System

    36 parts712
  • 2 layers69 × 53.8 mmTUSS4470 shield, the printed circuit board in 3D

    TUSS4470 shield

    Neumi/open_echo

    Open Source echo sounder / depth sounder / SONAR for bathymetry and research. Arduino based and compatible.

    36 parts530
  • 2 layers99.1 × 53.3 mmABSIS Mega, the printed circuit board in 3D

    ABSIS Mega

    jrsteensen/OpenHornet

    OpenHornet 1:1 F/A-18C Simulator Repository

    36 parts431
  • 2 layers16.1 × 119 mmConnectorL, the printed circuit board in 3D

    ConnectorL

    thpoll83/PolyKybd

    PolyKybd

    36 parts411CERN-OHL-W-2.0

Questions

How big is the Rflego termination PCB?

It measures 45.7 × 32.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Rflego termination use?

36 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Rflego termination KiCad files?

From the schusjon/rf_module_chain repository on GitHub, at the commit this page was made from: the board is module_termination/rflego_termination.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Rflego termination design in my own project?

Its repository states no licence, so its author keeps all rights: ask schusjon before reusing the design.