

BD0061
Reverse engineered disposable v a p e boards
- Size
- 31.1 × 19 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 29
- Nets
- 44
- Pads
- 135
- Tracks, vias
- 265, 100
- Pours
- 8
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 24 Sep 2025
- Updated
- 1 Nov 2025
Overview
BD0061 is an open-source printed circuit board by schlae, from the schlae/VapeRE repository on GitHub. It is a 2-layer board of 31.1 × 19 mm with 29 parts on 44 nets, routed with 265 tracks and 100 vias.
It is built around the PY32F030K28T6 and LR5112-E. Its parts include 15 resistors, 4 capacitors, 2 ICs, 2 connectors and 1 transistor.
Main components
2PY32F030K28T6
LQFP-32(7x7)64KB FLASH LQFP-32(7x7) Microcontrollers (MCU/MPU/SOC) ROHSPUYAMicrocontrollers (MCU/MPU/SOC)LR5112-E
ESOP-8-40℃~+85℃ 1 1.1A 4.2V 500nA 5V~32V Charging IC Constant current charging、Constant voltage charging、Trickle charging、Automatic recharge、Charge termination、Programmable charging current、Undervoltage lockout、Reverse current blocking、Overvoltage protection Lithium Battery Support Support ESOP-8 Battery Management ROHSLRBattery Management
README
README.mdReverse Engineered Vape Circuit Boards
Disposable vapes show up all the time in e-waste and are often found as litter at the side of the road (shame!) but they contain some useful components that can be reused by the cost-conscious hacker.
Note: Wear gloves when handling used devices and don't allow the vape liquid to contact your skin or eyes.
I've reverse engineered a number of different brands and placed the schematics and layout files in this repository. The summary table below is a good starting point.
Many of the vapes have debugging connections accessible through the USB-C charging cable interface, typically SWD on the CC pins, so you may be able to reprogram the vape without even opening up the case.
| Brand | PCB ID | Display | MCU | NOR flash | Battery IC | LDO regulator | Debug | Other Notes |
|---|---|---|---|---|---|---|---|---|
| (Unknown) | FT03 V3.0 | LCD | CHIPSEA F031K8V6 | GT 25Q32A | PC3221 | CJ6330 | SWD on CC lines. UART test points. | Touch IC TTP223. Pushbutton. 3 heater outputs with feedback. |
| Flum Mello | TMY_0118470101_V04 | LCD | CHIPSEA F031K8V6 | ZB 25VQ32 | TP4054 | CJ6330 | SWD on CC lines. | One heater output with feedback. |
| Rama 16000 | YK761-VP9012-A | LCD | BlueX BX2400 or RF01 | Puya PY25Q64 | CST4056 | CJ6330 | Test points for SWD | One heater with feedback. Bluetooth (!) |
| GeekBar Pulse 15000 | BD0027-USB_V1.5 | Blue and RGB LEDs | Puya PY32F030EK28 | None | LP4068 | None | SWD on CC lines. | 3-position slide switch. Two heaters with feedback. |
| Lost Mary MO20000 Pro | STW2915 V1.7 | LCD | Pya PY32F030EK28 | Puya PY32Q64 | LP4068 | CJ6330 (?) | SWD on CC lines. | |
| GeekBar Pulse X Jam | BD0061 | LCD and blue LEDs, PLS916H driver IC | Puya PY32F030EK28 | None | LR5112/LR5108 | None | SWD on CC lines. |
I also have firmware running on the Lost Mary MO20000 Pro that could be modified to run on other vapes with the same PY32F030 microcontroller.
License
All the reverse engineered hardware data is provided under the Creative Commons Attribution-ShareAlike 4.0 International license.
Parts
29| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 1K | Resistor_SMD:R_0402_1005Metric | R4, R5, R14, R18, R34 |
| 2 | 5.1K | Resistor_SMD:R_0402_1005Metric | R1, R2 |
| 1 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C31 |
| 1 | 100 | Resistor_SMD:R_0402_1005Metric | R56 |
| 1 | 100K | Resistor_SMD:R_0402_1005Metric | R19 |
| 1 | 10K | Resistor_SMD:R_0402_1005Metric | R55 |
| 1 | 1M | Resistor_SMD:R_0402_1005Metric | R16 |
| 1 | 1uF | Capacitor_SMD:C_0603_1608Metric | C2 |
| 1 | 2.0 | Resistor_SMD:R_0402_1005Metric | R7 |
| 1 | 4.7 | Resistor_SMD:R_0402_1005Metric | R6 |
| 1 | 4.7uF | Capacitor_SMD:C_0402_1005Metric | C5 |
| 1 | 4.7uF | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | ? | Fuse:Fuse_0603_1608Metric | F1 |
| 1 | Conn_01x16_MountingPin | VapeRE:UNK_FPC_1x16-1MP_P0.5mm_Horizontal | CN1 |
| 1 | DNI | Resistor_SMD:R_0402_1005Metric | R22 |
| 1 | GND | TestPoint:TestPoint_Pad_D1.5mm | TP3 |
| 1 | LR5112 | Package_DFN_QFN:DFN-8-1EP_3x3mm_P0.65mm_EP1.55x2.4mm | U1 |
| 1 | PY32F030K2 | Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.45x3.45mm | U2 |
| 1 | Q_PMOS_GSD | Package_TO_SOT_SMD:SOT-523 | Q17 |
| 1 | R_Small_US | Resistor_SMD:R_0402_1005Metric | R3 |
| 1 | SW_DP3T | VapeRE:SW_DP3T_SMD | SW1 |
| 1 | TB+1 | TestPoint:TestPoint_Pad_D1.5mm | TP2 |
| 1 | USB_C_Receptacle_PowerOnly_6P | VapeRE:USB_C_Receptacle_TYPE-C-VERT | J1 |
| 1 | VIN | TestPoint:TestPoint_Pad_D1.5mm | TP1 |
More from schlae/VapeRE
5- 4 layers34.9 × 20.3 mm

- 4 layers40.9 × 23.7 mm

- 2 layers

- 2 layers79.3 × 20.7 mm

- 2 layers37.8 × 16.2 mm

Similar boards
- 2 layers68.8 × 53.6 mm

- 2 layers52.3 × 10.5 mm

StackLink
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software
29 parts5.1kGPL-3.0 - 2 layers56 × 20 mm

HallEffectXY Endstop
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
29 parts1.1kGPL-3.0 - 2 layers50 × 23.2 mm

Analog
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
29 parts1kGPL-3.0 - 2 layers16.8 × 13.6 mm

E Fidget Lite
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
29 parts915 - 2 layers85 × 12.5 mm

TERES PCB3-TOUCH BTN Rev.A
OLIMEX/DIY-LAPTOP
Do It Yourself Open Source Hardware and Software Modular Hacker's Friendly Laptop
29 parts578Apache-2.0 - 2 layers33.7 × 97.8 mm

HAN ESP TSS721
UtilitechAS/amsreader-firmware
ESP8266 and ESP32 compatible firmware to read, interpret and publish data to MQTT from smart electrical meters, both DLMS and DSMR is supported
29 parts470 - 2 layers80 × 55 mm

Questions
How big is the BD0061 PCB?
It measures 31.1 × 19 mm and has 2 copper layers, 1.6 mm thick.
What parts does the BD0061 use?
29 parts, built around the PY32F030K28T6 and LR5112-E. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the BD0061 KiCad files?
From the schlae/VapeRE repository on GitHub, at the commit this page was made from: the board is BD0061/BD0061.kicad_pcb and its schematic BD0027/BD0027.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the BD0061 design in my own project?
Its repository states no licence, so its author keeps all rights: ask schlae before reusing the design.