2 layers20.5 × 24.8 mm
2 layers44.9 × 60.8 mm
GuacSolder
scherepi/bothertokenA simple little PCB toy designed for Hack Club's Solder YSWS.
- Size
- 44.9 × 60.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 8
- Nets
- 7
- Pads
- 15
- Tracks, vias
- 22, 0
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 2 May 2025
- Updated
- 2 May 2025
Overview
GuacSolder is an open-source printed circuit board by scherepi, from the scherepi/bothertoken repository on GitHub. It is a 2-layer board of 44.9 × 60.8 mm with 8 parts on 7 nets, routed with 22 tracks and 0 vias.
Its parts include 2 resistors and 1 transistor.
README
README.mdbothertoken
A simple little PCB toy designed for Hack Club's Solder YSWS.
This little design uses an NPN transistor, a photoresistor, and a SPST switch to bother all your friends endlessly. When switched on and placed in an environment with low light (like your friend's bag) it'll buzz utilizing the vibrating motor until turned off or brought into light. The light sensitivity can be adjusted using the potentiometer.
Bill of Materials:
- Cell Battery
- Photoresistor
- Resistor
- Potentiometer
- NPN Transistor
- Vibrating DC Motor
My slack username is guac md.
Parts
8| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | LOGO | LOGO | G***, G*** |
| 1 | Battery_Cell | Battery:BatteryHolder_Keystone_3034_1x20mm | BT1 |
| 1 | Motor_DC | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | M1 |
| 1 | NPN | Package_TO_SOT_THT:TO-92L_HandSolder | Q1 |
| 1 | R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2 |
| 1 | R_Photo | OptoDevice:R_LDR_4.9x4.2mm_P2.54mm_Vertical | R1 |
| 1 | R_Potentiometer | Potentiometer_THT:Potentiometer_Vishay_T73YP_Vertical | RV1 |
Questions
How big is the GuacSolder PCB?
It measures 44.9 × 60.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the GuacSolder use?
8 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the GuacSolder KiCad files?
From the scherepi/bothertoken repository on GitHub, at the commit this page was made from: the board is GuacSolder.kicad_pcb and its schematic GuacSolder.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the GuacSolder design in my own project?
Its repository states no licence, so its author keeps all rights: ask scherepi before reusing the design.
Similar boards
- 2 layers14.4 × 10.5 mm
OSO SWAB B1-00 Sensor Watch Accelerometer
joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch
8 parts2.1k - 2 layers7.9 × 39.1 mm
Brain board STM32F407 SD wing it
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
8 parts1.2k - 2 layers59.9 × 25.7 mm
Buffer
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
8 parts1kGPL-3.0 - 2 layers52 × 12.6 mm
USB
shanteacontrols/OpenDeck
A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.
8 parts960Apache-2.0 - 2 layers87.5 × 48.5 mm
7 input macropad
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
8 parts915 - 2 layers36.2 × 63.1 mm
PicoMemcard pico
dangiu/PicoMemcard
Emulating PSX Memory Card (or controller) using a Raspberry Pi Pico
8 parts694GPL-3.0 - 2 layers36 × 10 mm
PCB4-PWR BTN Rev.A
OLIMEX/DIY-LAPTOP
Do It Yourself Open Source Hardware and Software Modular Hacker's Friendly Laptop
8 parts578Apache-2.0