

Lv simple-7805
misc electronic projects
- Size
- 55 × 40 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 31
- Nets
- 8
- Pads
- 50
- Tracks, vias
- 57, 8
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 6 Oct 2020
- Updated
- 31 Oct 2026
Overview
Lv simple-7805 is an open-source printed circuit board by schenkmi, from the schenkmi/electronic-projects repository on GitHub, published under the CERN-OHL-W-2.0 licence. It is a 2-layer board of 55 × 40 mm with 31 parts on 8 nets, routed with 57 tracks and 8 vias.
It is built around the BYG22B-E3. Its parts include 9 connectors, 7 capacitors, 6 diodes, 3 resistors and 1 IC. It belongs with the audio and music boards of this library.
Main components
1README
README.mdelectronic-projects
misc electronic projects
History
2026.09.19
pre-amp-ECC86/kicad/psu-v6
Large PCB PSU for ECC86 with high side switch. Support LT3080 and LM317. Fix Drain/Source.
2026.09.02
pre-amp-ECC86/kicad/psu-v5
Large PCB PSU for ECC86 with high side switch. Support LT3080 and LM317
2026.08.26
pre-amp-ECC86/kicad/psu-v4
Large PCB PSU for ECC86 without relais. Support LT3080 and LM317
2026.08.23
input-sel-attenuator/software/v9
Power up timer to 64ms wait till voltage is stabilized
2026.08.10
pre-amp-ECC86/kicad/psu-v3
Large PCB PSU for ECC86
2026.08.01
pre-amp-ECC86/kicad/psu-v2
Shrinked and optimized PSU for ECC86
2026.07.22
pre-amp-ECC86/kicad/psu-v1
First version of PSU for ECC86
2026.07.12
pre-amp-ECC86/kicad/v1
First version of ECC86 based pre-amplifier
spdif-recv-ak4118-ak4137/software/spdif-recv-ak4118-ak4137-v4.X
Updated software for V4 PCB
2026.06.05
dac-pcm1702-v1/kicad-psu-v8/
DC/DC for +5V digital path
dac-pcm1702-v1/kicad-asrc-v14
PCB LED fix External LED support
spdif-recv-ak4118-ak4137/kicad/v4
External LED support Change one LDO to TLV1117-3.3 due to power dissipation
2026.05.28
dac-pcm1702-v1/kicad-asrc-v13
PCB re-design with fixed LED ordering
2026.05.27
pre-amp-26A7/ltspice/v2/
New CCS simulation with smaller FETs
2026.05.26
dac-pcm1702-v1/software/spdif-recv-asrc-4392-v12.X
New software for SPDIF ASRC receiver including UART and IR
2026.05.16
dac-pcm1702-v1/kicad-asrc-v12
PSU re-design, UART for debugging, I2C debugging, IR
spdif-recv-ak4118-ak4137/kicad/v3
Add IR support
2026.05.10
spdif-recv-cs8416-ak4137/kicad/v7
Improved power supply, I2S debug, Serial console
spdif-recv-ak4118-ak4137/kicad/v2
Small redesign
2026.04.25
spdif-recv-ak4118-ak4137/kicad/v1
Finalize and ordered
pre-amp-26A7/kicad/v2
Finalize and ordered
2026.03.29
pre-amp-26A7/kicad/v1
Finalize and ordered v1
2026.03.28
lv-psu-dcdc/kicad/fixed-v3
Better thermal management for DC/DC
lv-lownoise-psu/kicad/v7-dcdc-large-cap
Better thermal handling on DC/DC
input-sel-attenuator/kicad/v9-10k-47k
Changed footprint for L1 and C1
2026.03.11
lv-psu-dcdc/kicad/fixed-v2
Eval board with different inductors
hv-psu-discrete/kicad/maida-lt3080-v5
HV PSU with DC/DC for +5V output
2026.03.05
lv-lownoise-psu/kicad/v6-dcdc-large-cap
Finalize v6 with large reservoir cap
2026.02.25
hv-psu-discrete/kicad/maida-lt3080-v5-26A7GT
HV PSU for 26A7 pre-amp
2026.01.13
input-sel-attenuator/software/ir-debug-v3
Update MCC generated code
dac-pcm1792a/software/asrc-pcm1792a-v4.X
Update MCC generated code
dac-pcm1702-v1/software/v8
Update MCC generated code
spdif-recv-cs8416-ak4137/software/spdif-recv-cs8416-ak4137-v5.X
Update MCC generated code
input-sel-attenuator/software/v9
Update MCC generated code
rpi-hat-spdif/kicad/V9
RPI HAT SPDIF Output increase hole diameter to 3.2mm
rpi-hat-spdif/kicad/V9-min
RPI HAT SPDIF Output minized PCB increase hole diameter to 3.2mm
2026.01.01
adapter/spdif/kicad/v2
LVDS SPDIF XMIT with rotated connector
adapter/spdif/kicad/v2b
LVDS SPDIF XMIT with standard connector
rpi-hat-spdif/kicad/V7-min
RPI HAT SPDIF Output minized PCB
rpi-hat-spdif/kicad/V8
RPI HAT SPDIF Output new PCB
2025.12.20
adapter/spdif/kicad/v1
Finalize v1 LVDS SPDIF XMIT
rpi-hat-spdif/kicad/v6
RPI HAT SPDIF Output
rpi-hat-spdif/kicad/v6-min
RPI HAT SPDIF Output minimized
2025.12.08
pre-amp-ECC88/kicad/v9
Finalize and ordered v9
2025.09.29
retro/c64-user-port-led
Finalize v1 of C64 user port LED
2025.09.28
dac-pcm1704/kicad/dac-df1706-pcm1704-v2
Finalize and ordered v2
2025.09.21
dac-pcm1704/kicad/dac-pcm1704-v5
Finalize and ordered v5
dac-pcm1702-v1/kicad-i2s-nos-v7
Finalize and ordered v7
dac-pcm1792a/kicad/v6/
Finalize and ordered v6
2025.09.13
input-sel-attenuator/software/ir-debug-v2
input-sel-attenuator/software/v8
V2.5 2025.09.12 Shiny new push button and saving handling Use volume when doing channel switch.
2025.09.07
lv-lownoise-psu/kicad/v5-dcdc
Finalize and ordered v5
lv-lownoise-psu/kicad/v5-dcdc-large-cap
Finalize and ordered v5 with large reservoir cap
2025.08.25
lt1115-phono-mm-mc/kicad/v6
Finalize and ordered v6
2025.08.23
dac-pcm1702-v1/kicad-psu-v7
Finalize and ordered v7
Parts
31| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | BYG22B-E3 | Diode_SMD:D_SMA_Handsoldering | D2, D3, D4, D5 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 2 | 1N4007 | Diode_SMD:D_SMA_Handsoldering | D1, D6 |
| 2 | AC-LV | Connector_Pin:Pin_D1.3mm_L11.0mm | J1, J2 |
| 2 | GND | Connector_Pin:Pin_D1.3mm_L11.0mm | J6, J8 |
| 1 | +5VDC | Connector_Pin:Pin_D1.3mm_L11.0mm | J5 |
| 1 | 100R/0.6W | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4 |
| 1 | 100nF/50V | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2 |
| 1 | 10nF | Capacitor_THT:C_Rect_L7.2mm_W2.5mm_P5.00mm_FKS2_FKP2_MKS2_MKP2 | C5 |
| 1 | 1uF/25V | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C19 |
| 1 | 2200uF/35VDC | Capacitor_THT:CP_Radial_D16.0mm_P7.50mm | C14 |
| 1 | 330R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R15 |
| 1 | 330nF/50V | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C16 |
| 1 | Cs/50V | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3 |
| 1 | Cx/10nF/50V | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 1 | DCVIN | Connector_Pin:Pin_D1.3mm_L11.0mm | J4 |
| 1 | EARTH | Connector_Pin:Pin_D1.3mm_L11.0mm | J9 |
| 1 | Heatsink | Heatsink:Heatsink_Fischer_SK104-STC-STIC_35x13mm_2xDrill2.5mm | HS2 |
| 1 | LED | Connector_Pin:Pin_D1.0mm_L10.0mm | J7 |
| 1 | LED_GND | Connector_Pin:Pin_D1.0mm_L10.0mm | J3 |
| 1 | LM7805_TO220 | Package_TO_SOT_THT:TO-220-3_Vertical | U1 |
| 1 | Rs/1/8W | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
More from schenkmi/electronic-projects
12- 2 layers389 × 136.2 mm

- 2 layers159.9 × 99.9 mm

Hv power supply t reg v2
schenkmi/electronic-projects
misc electronic projects
107 parts6CERN-OHL-W-2.0 - 2 layers159.9 × 99.9 mm

- 2 layers159.9 × 99.9 mm

- 2 layers159.9 × 99.9 mm

- 2 layers159.9 × 99.9 mm

- 4 layers97.8 × 69.9 mm

- 2 layers159.5 × 99.6 mm

- 2 layers159.7 × 99.6 mm

- 2 layers159.5 × 99.6 mm

- 2 layers159.5 × 99.6 mm

- 2 layers159.7 × 99.6 mm

Similar boards
- 2 layers44.5 × 46.9 mm

OSO SWAT B1-jig
joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch
31 parts2.1k - 2 layers65 × 30 mm

Rgb to hdmi
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
31 parts1kGPL-3.0 - 2 layers191 × 98.5 mm

MacroKeypad
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
31 parts915 - 2 layers39 × 45.2 mm

CH32V003F4P6-R0-1v1
openwch/ch32v003
CH32V003 is an ultra-cheap RISC-V MCU with 2KB SRAM, 16KB flash, and up to 18 GPIOs that sells for under $0.10
31 parts599 - 2 layers26.7 × 27.9 mm

Breakout board
Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.
31 parts546MIT - 2 layers100 × 50 mm

Pixelix
BlueAndi/Pixelix
Full RGB LED matrix, based on an ESP32 and WS2812B LEDs or emulated LEDs on TFT.
31 parts447MIT - 2 layers77.2 × 69.8 mm

- 2 layers103 × 55 mm

Questions
How big is the Lv simple-7805 PCB?
It measures 55 × 40 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Lv simple-7805 use?
31 parts, built around the BYG22B-E3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Lv simple-7805 KiCad files?
From the schenkmi/electronic-projects repository on GitHub, at the commit this page was made from: the board is lv-simple-psu/kicad/lv-simple-7805-v2/lv-simple-7805.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Lv simple-7805 design in my own project?
Its repository publishes it under the CERN-OHL-W-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).