sbman/TinyG-SuperPID-IntegratorA schematic and PCB design to integrate TinyG with SuperPID
TinyG SuperPID Integrator is an open-source printed circuit board by sbman, from the sbman/TinyG-SuperPID-Integrator repository on GitHub, published under the BSD-3-Clause licence. It is a 4-layer board of 85.7 × 48.3 mm with 28 parts on 22 nets, routed with 109 tracks and 18 vias.
It is built around the LM2678T-5.0, 12TQ200 and UJ2-AH-4-TH. Its parts include 10 resistors, 5 connectors, 3 capacitors, 3 ICs and 2 diodes.
A schematic and PCB design to integrate TinyG with SuperPID
$p1
[p1frq] pwm frequency 100 Hz
[p1csl] pwm cw speed lo 5000 RPM
[p1csh] pwm cw speed hi 30000 RPM
[p1cpl] pwm cw phase lo 0.833 [0..1]
[p1cph] pwm cw phase hi 0.000 [0..1]
[p1wsl] pwm ccw speed lo 1000 RPM
[p1wsh] pwm ccw speed hi 2000 RPM
[p1wpl] pwm ccw phase lo 0.125 [0..1]
[p1wph] pwm ccw phase hi 0.200 [0..1]
[p1pof] pwm phase off 0.833 [0..1]
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 226 | 1_MyGlobalLibFootprintLibrary:MRS25000C2260FCT00 | R1, R2, R9, R10 |
| 3 | .1uF | Capacitor_THT:C_Disc_D3.8mm_W2.6mm_P2.50mm | C1, C2, Cinx1 |
| 2 | 1K | 1_MyGlobalLibFootprintLibrary:MRS25000C2260FCT00 | R3, R4 |
| 2 | 47K | 1_MyGlobalLibFootprintLibrary:MRS25000C2260FCT00 | R5, R7 |
| 2 | TLP2662F | 1_MyGlobalLibFootprintLibrary:TLP2662F | U2, U3 |
| 1 | .01uF | Capacitor_THT:C_Disc_D3.8mm_W2.6mm_P2.50mm | Cb1 |
| 1 | 100uF/50V | Capacitor_THT:CP_Radial_D8.0mm_P3.50mm | Cin1 |
| 1 | 12TQ200 | Package_TO_SOT_THT:TO-220-2_Horizontal_TabDown | D1 |
| 1 | 22uH | Inductor_THT:L_Radial_D16.8mm_P12.07mm_Vishay_IHB-1 | L1 |
| 1 | 270uF/50V | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | Cout1 |
| 1 | 38.3K | 1_MyGlobalLibFootprintLibrary:MRS25000C2260FCT00 | R8 |
| 1 | 82K | 1_MyGlobalLibFootprintLibrary:MRS25000C2260FCT00 | R6 |
| 1 | DNI | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | RL1 |
| 1 | LED | LED_THT:LED_D4.0mm | D2 |
| 1 | LM2678T-5.0 | Package_TO_SOT_THT:TO-220-7_P2.54x3.8mm_StaggerEven_Lead5.85mm_TabDown | U1 |
| 1 | SPP | 1_MyGlobalLibFootprintLibrary:CUI_TB001-500-04BE | J2 |
| 1 | SSR | 1_MyGlobalLibFootprintLibrary:CUI_TB001-500-02BE | J5 |
| 1 | TINYG | 1_MyGlobalLibFootprintLibrary:CUI_TB001-500-04BE | J1 |
| 1 | UJ2-AH-4-TH | 1_MyGlobalLibFootprintLibrary:CUI_UJ2-AH-4-TH | J4 |
| 1 | Vin (12-26V) | 1_MyGlobalLibFootprintLibrary:CUI_TB001-500-02BE | J3 |
It measures 85.7 × 48.3 mm and has 4 copper layers, 4.69 mm thick.
28 parts, built around the LM2678T-5.0, 12TQ200 and UJ2-AH-4-TH. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the sbman/TinyG-SuperPID-Integrator repository on GitHub, at the commit this page was made from: the board is TinyG-SuperPid-Integrator.kicad_pcb and its schematic TinyG-SuperPid-Integrator.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the BSD-3-Clause licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
automagicle/handheld-sstc
A handheld SSTC project on PCB, designed for a large magic wand form factor, entirely powered from 8s 18650. Uses direct secondary feedback with gate driver and MOSFETs, and 555 interrupter
bot-hoven/bot-hoven-electrical
Electrical substem for Bot-Hoven. Includes KiCad files containing schematics and PCB designs for components in Bot-Hoven.
jgazeley/accord
Raspberry Pi Pico W firmware and keyless-entry hardware for a 2001 Honda Accord.
loxodes/vna
Under development open hardware microwave vector network analyzer
DRWJSCHMIDT/T41
This is the repository for the officially released V10, V11, and V12 versions of the T41 Software Defined Transceiver hardware and kits.
