
LogicAnalyzer
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software

514 pcb design is an open-source printed circuit board by sayzs1, from the sayzs1/514finalproject repository on GitHub. It is a 2-layer board of 91.4 × 61 mm with 10 parts on 34 nets, routed with 50 tracks and 0 vias.
Its parts include 2 resistors, 2 diodes, 1 connector and 1 switch. It belongs with the ESP32 and AVR (ATmega, ATtiny) boards of this library.
display device (https://docs.google.com/spreadsheets/d/1Fs5N1xexbV84x_a7rraujws7_rJ7wwqp-ucotN-aB_U/edit#gid=1736231862)
sensor device (https://docs.google.com/spreadsheets/d/1yTdoJ2G-WuFVsdiDZFG5gB1jXGIMEwbrjy6sTowYsGw/edit#gid=456446529)
The project consists of two parts, display device and sense device, which are independently powered by batteries. The purpose of the device is to detect packages at the door and alert people inside to pick them up in time.




| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 85Ω | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2 |
| 1 | Arduino_Nano_ESP32_Tile | esp32_footprint:Arduino_Nano_ESP32_Tile | A2 |
| 1 | Battery_Cell | Connector_JST:JST_PHD_B8B-PHDSS_2x04_P2.00mm_Vertical | BT1 |
| 1 | Conn_01x02_Pin | Connector_JST:JST_XA_B02B-XASK-1-A_1x02_P2.50mm_Vertical | J1 |
| 1 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D2 |
| 1 | LED_RGBA | LED_SMD:LED_SK6812_PLCC4_5.0x5.0mm_P3.2mm | D1 |
| 1 | SSD1306 | ssd1306:128x64OLED | Brd1 |
| 1 | SW_SPDT | Connector_JST:JST_EH_B3B-EH-A_1x03_P2.50mm_Vertical | SW1 |
| 1 | Stepper_Motor_bipolar | x27_footprint:x27_stepper | M1 |

gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software

byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch


OLIMEX/OLINUXINO
OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C

rusefi/rusefi
rusefi - GPL internal combustion engine control unit

VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
It measures 91.4 × 61 mm and has 2 copper layers, 1.6 mm thick.
10 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the sayzs1/514finalproject repository on GitHub, at the commit this page was made from: the board is 514 pcb design/514 pcb design.kicad_pcb and its schematic 514 pcb design/514 pcb design.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask sayzs1 before reusing the design.