Skip to the content
2 layers8 × 26 mmPUSH BUTTON, the printed circuit board in 3D
Size
8 × 26 mm
Copper layers
2
Thickness
1.6 mm
Parts
6
Nets
7
Pads
15
Tracks, vias
35, 0
Routed
Yes
KiCad
KiCad 3
Created
8 Sep 2016
Updated
8 Sep 2016

Overview

PUSH BUTTON is an open-source printed circuit board by saul-rodriguez, from the saul-rodriguez/KICAD_PROJECTS repository on GitHub. It is a 2-layer board of 8 × 26 mm with 6 parts on 7 nets, routed with 35 tracks and 0 vias.

Its parts include 2 connectors, 1 diode and 1 switch.

Parts

6
QtyValueFootprintReferences
1CSMD_Packages:SM0603_Capa0.1u1
1CONN_1Saul_footprints:MholeP2
1CONN_2X2Pin_Headers:Pin_Header_Straight_2x02P1
1LEDSMD_Packages:SM1206D1
1PBUTTONSaul_footprints:PCB_PUSH_bottomS1
1RSMD_Packages:SM0603_Resistor1k1

More from saul-rodriguez/KICAD_PROJECTS

12
  • 2 layers30 × 50 mmPA READEr, the printed circuit board in 3D

    PA READEr

    saul-rodriguez/KICAD_PROJECTS

    57 parts
  • 2 layers34 × 41 mmBio2, the printed circuit board in 3D

    Bio2

    saul-rodriguez/KICAD_PROJECTS

    54 parts
  • 2 layers40.3 × 74.5 mmBio2, the printed circuit board in 3D

    Bio2

    saul-rodriguez/KICAD_PROJECTS

    41 parts
  • 2 layers65 × 65 mmB777 autopilot, the printed circuit board in 3D

    B777 autopilot

    saul-rodriguez/KICAD_PROJECTS

    25 parts
  • 2 layers242.5 × 177 mmPANEL 777, the printed circuit board in 3D

    PANEL 777

    saul-rodriguez/KICAD_PROJECTS

    25 parts
  • 2 layers65 × 65 mmB777 autopilot, the printed circuit board in 3D

    B777 autopilot

    saul-rodriguez/KICAD_PROJECTS

    20 parts
  • 2 layers28 × 22 mmPA READEr, the printed circuit board in 3D

    PA READEr

    saul-rodriguez/KICAD_PROJECTS

    14 parts
  • 2 layers24 × 19 mmPA READEr, the printed circuit board in 3D

    PA READEr

    saul-rodriguez/KICAD_PROJECTS

    13 parts
  • 2 layers40 × 28 mmDISP4 I2C, the printed circuit board in 3D

    DISP4 I2C

    saul-rodriguez/KICAD_PROJECTS

    12 parts
  • 2 layers20 × 32.5 mmEncoder, the printed circuit board in 3D

    Encoder

    saul-rodriguez/KICAD_PROJECTS

    10 parts

Similar boards

  • 2 layers18.5 × 11.1 mmSwitch, the printed circuit board in 3D

    Switch

    byrantech/laptop

    anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

    6 parts4.3kMIT
  • 2 layers14.6 × 33 mmBrain board SD Card 1, the printed circuit board in 3D

    Brain board SD Card 1

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    6 parts1.2k
  • 2 layers9 × 9 mmDpoint, the printed circuit board in 3D

    Dpoint

    Jcparkyn/dpoint

    Open-source digital stylus using camera tracking and inertial measurements

    6 parts1.1kMIT
  • 2 layers51.5 × 16.6 mmMicroswitchXY Endstop, the printed circuit board in 3D

    MicroswitchXY Endstop

    VoronDesign/Voron-Hardware

    Cool Hardware designed by the Voron Design group

    6 parts1.1kGPL-3.0
  • 2 layers21.9 × 76.7 mmAmiga External, the printed circuit board in 3D

    Amiga External

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    6 parts1kGPL-3.0
  • 2 layers88.9 × 50.8 mmBusinesscard, the printed circuit board in 3D

    Businesscard

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    6 parts915
  • 2 layers20.3 × 15.2 mmL0 RGB led, the printed circuit board in 3D

    L0 RGB led

    Luos-io/luos_engine

    Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

    6 parts546MIT
  • 2 layers9 × 3.6 mmOpticalEncoder, the printed circuit board in 3D

    OpticalEncoder

    adamb314/ServoProject

    Getting the most out of your hobby servo

    6 parts545

Questions

How big is the PUSH BUTTON PCB?

It measures 8 × 26 mm and has 2 copper layers, 1.6 mm thick.

What parts does the PUSH BUTTON use?

6 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the PUSH BUTTON KiCad files?

From the saul-rodriguez/KICAD_PROJECTS repository on GitHub, at the commit this page was made from: the board is FLIGHTGEAR_RELATED/PUSH_BUTTON/PUSH_BUTTON.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the PUSH BUTTON design in my own project?

Its repository states no licence, so its author keeps all rights: ask saul-rodriguez before reusing the design.