2 layers90 × 70 mm
SMDBattHolder
sashkoBeats/Lithium-Battery-Research-Rig
University project development of a rig for lithium battery testing and research.
16 parts
2 layers94 × 55.9 mm
Research Prototype
sashkoBeats/Lithium-Battery-Research-RigUniversity project development of a rig for lithium battery testing and research.
- Size
- 94 × 55.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 59
- Nets
- 117
- Pads
- 252
- Tracks, vias
- 585, 10
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 15 Jul 2024
- Updated
- 16 Oct 2024
Overview
Research Prototype is an open-source printed circuit board by sashkoBeats, from the sashkoBeats/Lithium-Battery-Research-Rig repository on GitHub. It is a 2-layer board of 94 × 55.9 mm with 59 parts on 117 nets, routed with 585 tracks and 10 vias.
It is built around the MAX11161EUB+ and MAX14921ECS+. Its parts include 24 capacitors, 17 resistors, 9 connectors, 2 ICs and 2 diodes. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
2
MAX11161EUB+
uMAX-10-40℃~+85℃ 0.3LSB 0.8LSB 1 16 250kHz 4.75V~5.25V 92.2dB Built-in Multi-chip synchronization、Synchronous triggering、Simultaneous sampling SAR SPI uMAX-10 Analog to Digital Converters (ADC) ROHSMaxim Integrated (Analog Devices)Analog To Digital Converters (ADC)
MAX14921ECS+
TQFP-80(12x12)16 TQFP-80(12x12) Analog Front End (AFE) ROHSMaxim Integrated (Analog Devices)Battery Management
README
README.mdLithium Battery Research Rig
University project development of a rig for 18650 lithium battery testing and research.
End goal is an EV simulation rig for researching EV battery health and performance.
Created by Aleksandar Zdravkov and Indra Erkens
Fontys University of Applied Sciences
S7 Project and CSA1/2 2022-2024
Parts
59| Qty | Value | Footprint | References |
|---|---|---|---|
| 20 | 1uF | SamacSys_Parts:CAPC3216X180N | C1, C2, C3, C4, C5, C10, C11, C12, C13, C14, C15, C16, C17, C18, C20, C22 +4 |
| 16 | 3k | SamacSys_Parts:ERJ3EK__0603_ | R1, R2, R3, R4, R5, R6, R7, R8, R9, R10, R11, R12, R13, R14, R15, R16 |
| 2 | 22-23-2031 | SamacSys_Parts:SHDR3W82P0X254_1X3_747X635X818P | J15, J16 |
| 2 | Conn_01x02_Male | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J17, J18 |
| 2 | D_Schottky | SamacSys_Parts:SOD2512X115N | D1, D2 |
| 1 | 0.1uF | SamacSys_Parts:CAPC1005X55N | C19 |
| 1 | 100uF | SamacSys_Parts:CAPPRD250W50D680H1250 | C0 |
| 1 | 10uF | SamacSys_Parts:CAPC2012X140N | C23 |
| 1 | 35362-0550 | SamacSys_Parts:SHDR5W50P0X200_1X5_1230X550X850P | J11 |
| 1 | 35362-1250 | SamacSys_Parts:353621250 | J12 |
| 1 | 4.7nF | SamacSys_Parts:CAPC1608X90N | C21 |
| 1 | Arduino_Nano_v3.x | Module:Arduino_Nano | A1 |
| 1 | Conn_01x06_Male | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J14 |
| 1 | Conn_01x07_Male | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J13 |
| 1 | MAX11161EUB+ | SamacSys_Parts:SOP50P490X110-10N | IC2 |
| 1 | MAX14921ECS+ | SamacSys_Parts:QFP50P1400X1400X120-80N | IC1 |
| 1 | R4K7 | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R17 |
| 1 | Screw_Terminal_01x02 | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J10 |
The 55 most common of 59 parts.
More from sashkoBeats/Lithium-Battery-Research-Rig
1Similar boards
- 4 layers120 × 65 mm
- 2 layers216.9 × 86.8 mm
Sweepbling lp pcb
davidphilipbarr/Sweep
Sweep - a small promicro based keyboard inspired by the Ferris.
59 parts2.1k - 2 layers132.3 × 94.9 mm
- 2 layers100 × 24 mm
STM32 Klipper Expander
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
59 parts1.1kGPL-3.0 - 2 layers77.5 × 20.4 mm
- 2 layers80 × 110 mm
NucDeck Left Controller PCB
dmcke5/NucDeck
The Open Source DIY Handheld Gaming PC!
59 parts561CERN-OHL-S-2.0 - 2 layers100 × 96 mm
Backlight
jackw01/scanlight
A better light source for scanning color negative film
59 parts397CERN-OHL-W-2.0 - 2 layers95.3 × 100 mm
Beyblock20
ChrisChrisLoLo/beyblock20
The magnetic, modular, 20-key macropad that can join together to form an ortholinear board
59 parts335GPL-3.0
Questions
How big is the Research Prototype PCB?
It measures 94 × 55.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Research Prototype use?
59 parts, built around the MAX11161EUB+ and MAX14921ECS+. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Research Prototype KiCad files?
From the sashkoBeats/Lithium-Battery-Research-Rig repository on GitHub, at the commit this page was made from: the board is BatteryMonitoringBoard/Research Prototype.kicad_pcb and its schematic 18650 Battery mount/SMDBattHolder/SMDBattHolder.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Research Prototype design in my own project?
Its repository states no licence, so its author keeps all rights: ask sashkoBeats before reusing the design.