
Amiga gfxcard old
mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog

Atari 2600 cartridge PCB
A2k6-cart is an open-source printed circuit board by sarweiler, from the sarweiler/a2k6-cart repository on GitHub, published under the WTFPL licence. It is a 2-layer board of 41.4 × 47.8 mm with 4 parts on 24 nets, routed with 104 tracks and 3 vias.
It is built around the 74LS04PC. Its parts include 2 ICs and 1 connector. It belongs with the retro computing and games boards of this library.
A cartridge PCB for the Atari 2600 for housing a 2732 EPROM and a 74LS04 hex inverter IC.

More photos:
Download the a2k6-cart-gerbers.zip file for the latest release, upload the zip archive to a PCB manufacturer of your choice, and order a PCB. Make sure to choose 1.6 mm for PCB thickness (for many manufacturers this is the default) and choose a color for the solder mask that you like.
So far I could only test it with one EPROM model, the National Semiconductors NMC27C32BQ200, because it's the only one I have on hand. Others with similar pin outs may work, too. If you've successfully tested one, feel free to message me, and I'll keep a list here.
The PCB fits in a standard Atari 2600 game cartridge case (tested with a Starmaster case). In my tests, the EPROM with a socket unfortunately was just a bit too thick, so if you plan to put the PCB in a case, I think the EPROM must be soldered to the PCB.
On the PCB, the side with the square pattern (the side with the EPROM) is the "label" side and must face towards the back of the console when inserting it.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 2600_Cartridge_Port | Atari:2600_Cartridge_Port | J1 |
| 1 | 2732 | Package_DIP:DIP-24_W15.24mm_Socket_LongPads | U1 |
| 1 | 74LS04 | Package_DIP:DIP-14_W7.62mm_LongPads | U2 |
| 1 | LOGO | atari26k-cart:pattern | G*** |

mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog

Redherring32/OpenTendo
An Open-Source HardWare (OSHW) recreation of the original 1985 front-loading NES Motherboard

jotego/jtcores
FPGA cores compatible with multiple arcade game machines and KiCAD schematics of arcade games. Working on MiSTer FPGA/Analogue Pocket

jes/scamp-cpu
A homebrew 16-bit CPU with a homebrew Unix-like-ish operating system.


Nakazoto/CenturionComputer
This is just a simple backup of all the files related to the Centurion that I have stored on my HD. The Wiki itself has far more in-depth information about the Centurion and it's individual cards.


The-Invent0r/8-bit-Computer-PCB
These are the KiCAD files for my 8-Bit Computer.
It measures 41.4 × 47.8 mm and has 2 copper layers, 1.6 mm thick.
4 parts, built around the 74LS04PC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the sarweiler/a2k6-cart repository on GitHub, at the commit this page was made from: the board is kicad/a2k6-cart.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the WTFPL licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).