Skip to the content
2 layers117.9 × 74 mmCern display controller, the printed circuit board in 3D

Cern display controller

sarahemm/cern-mimic-panel

LED display showing the current status of the CERN accelerator complex

Size
117.9 × 74 mm
Copper layers
2
Thickness
1.6 mm
Parts
71
Nets
86
Pads
351
Tracks, vias
630, 52
Pours
2
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
3 May 2025
Updated
27 Feb 2026

Overview

Cern display controller is an open-source printed circuit board by sarahemm, from the sarahemm/cern-mimic-panel repository on GitHub. It is a 2-layer board of 117.9 × 74 mm with 71 parts on 86 nets, routed with 630 tracks and 52 vias.

It is built around the ESP32-C6-WROOM-1-N8 and PCA9518PW. Its parts include 15 capacitors, 9 connectors, 6 resistors, 5 fuses and 4 switches. It belongs with the lEDs and displays boards and the ESP32 and RISC-V boards of this library.

Main components

2

README

README.md

cern-mimic-panel

LED display showing the current status of the CERN accelerator complex

Parts

71
QtyValueFootprintReferences
81uFCapacitor_SMD:C_0603_1608MetricC8, C9, C10, C11, C12, C13, C14, C15
51A Hold, 2A TripFuse:Fuse_2920_7451MetricF1, F2, F3, F4, F5
40.1uFCapacitor_SMD:C_0603_1608MetricC2, C5, C7, C16
44.7kResistor_SMD:R_Array_Convex_4x0603RN1, RN2, RN3, RN4
3402Resistor_SMD:R_0603_1608MetricR3, R4, R5
210kResistor_SMD:R_0603_1608MetricR7, R8
222uFCapacitor_SMD:C_0603_1608MetricC3, C6
2MCU_SCLTestPoint:TestPoint_Pad_1.5x1.5mmTP4, TP5
2~Resistor_SMD:R_0603_1608MetricRx-1, Rx-2
1+15VTestPoint:TestPoint_Pad_2.0x2.0mmTP3
1+3.3VTestPoint:TestPoint_Pad_2.0x2.0mmTP2
110uFCapacitor_SMD:C_0603_1608MetricC1
15.1kResistor_SMD:R_0603_1608MetricR6
1BootButton_Switch_SMD:SW_SPST_PTS645SW3
1Disable Port 1Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJP1
1Disable Port 2Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJP2
1Disable Port 3Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJP3
1Disable Port 4Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJP4
1EA_DOGM204-ASen_Display:EA-DOGM204-ADSP1
1ESP32-C6-WROOM-1Espressif_RF_Module:ESP32-C6-WROOM-1U3
1ExpansionConnector_PinHeader_2.54mm:PinHeader_2x07_P2.54mm_VerticalCN9
1GNDTestPoint:TestPoint_THTPad_1.5x1.5mm_Drill0.7mmTP1
1JTAGConnector_PinHeader_2.54mm:PinHeader_2x10_P2.54mm_VerticalCN8
1LCD_MISOTestPoint:TestPoint_Pad_1.5x1.5mmTP8
1LCD_MOSITestPoint:TestPoint_Pad_1.5x1.5mmTP9
1LCD_SCLKTestPoint:TestPoint_Pad_1.5x1.5mmTP7
1LCD_~{RST}TestPoint:TestPoint_Pad_1.5x1.5mmTP6
1LOGObt-md-remote:strich-5mmG***
1Link Port 1Connector_RJ:RJ45_Amphenol_RJHSE5380CN2
1Link Port 2Connector_RJ:RJ45_Amphenol_RJHSE5380CN3
1Link Port 3Connector_RJ:RJ45_Amphenol_RJHSE5380CN4
1Link Port 4Connector_RJ:RJ45_Amphenol_RJHSE5380CN5
1N7803-1PHSen_Converter_DCDC:MeanWell-N78-HU1
1NavigationSen_Switch:E_Switch-JS1300SW4
1PCA9518Package_SO:TSSOP-20_4.4x6.5mm_P0.65mmU2
1PowerLED_SMD:LED_0603_1608MetricLED1
1PowerSen_Switch:E_Switch-ANR11-HSW1
1Power In (15V)Connector_BarrelJack:BarrelJack_HorizontalCN1
1ResetButton_Switch_SMD:SW_SPST_PTS645SW2
1SerialConnector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_VerticalCN7
1StatusLED_SMD:LED_0603_1608MetricLED2
1USB_C_Receptacle_USB2.0_16PConnector_USB:USB_C_Receptacle_G-Switch_GT-USB-7010ASVCN6
1WiFiLED_SMD:LED_0603_1608MetricLED3

The 66 most common of 71 parts.

More from sarahemm/cern-mimic-panel

1
  • 2 layers161 × 175.8 mmMini lhc display, the printed circuit board in 3D

    Mini lhc display

    sarahemm/cern-mimic-panel

    LED display showing the current status of the CERN accelerator complex

    169 parts

Similar boards

  • 4 layers86.4 × 54.6 mmChewtoy, the printed circuit board in 3D

    Chewtoy

    adamatom/chewtoy

    This is a KiCad project for a i2c and GPIO expander cape for the BeagleBone Black. It provides eight expansion ports, with each port offering access to the common i2c bus as well as two dedicated GPIO pins

    37 partsCC0-1.0
  • 4 layers40 × 40 mmMaster, the printed circuit board in 3D

    Master

    Tinkerforge/master-brick

    Basis to build stacks and has 4 Bricklet ports

    125 parts5
  • 2 layers69.4 × 113 mmEpaper reader hw, the printed circuit board in 3D

    Epaper reader hw

    mathias4833/epaper-reader-hw

    An open-source e-paper reader

    126 parts75CERN-OHL-W-2.0
  • 2 layers64 × 50 mmEverAliveSensor PCB, the printed circuit board in 3D

    EverAliveSensor PCB

    jfm92/everAliveSensor

    Solar-powered BLE environmental sensor (temp, humidity, pressure) with a 50F supercapacitor — potentially infinite lifetime, 19-day dark autonomy. ESP32 + BME680. Experimental.

    54 parts28
  • 2 layers62.4 × 113.8 mmEinkScreen, the printed circuit board in 3D

    EinkScreen

    Irony95/InkCard

    An e-ink display that mirrors your phone/device

    88 parts14MIT
  • 2 layers99.9 × 40 mmHackbat, the printed circuit board in 3D

    Hackbat

    thehackbat/hackbat_esp32

    Hackbat version based on the ESP32C6

    68 parts12
  • 4 layers136.3 × 71.1 mmMSign, the printed circuit board in 3D

    MSign

    mincrmatt12/MSign

    internet-connected led sign control system

    169 parts11MIT
  • 4 layers114.9 × 129.9 mmTanmatsu, the printed circuit board in 3D

    Tanmatsu

    Nicolai-Electronics/tanmatsu-hardware

    Hardware design of the Tanmatsu mainboard

    372 parts9CERN-OHL-P-2.0

Questions

How big is the Cern display controller PCB?

It measures 117.9 × 74 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Cern display controller use?

71 parts, built around the ESP32-C6-WROOM-1-N8 and PCA9518PW. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Cern display controller KiCad files?

From the sarahemm/cern-mimic-panel repository on GitHub, at the commit this page was made from: the board is cern-display-controller/hardware/cern-display-controller.kicad_pcb and its schematic cern-display-controller/hardware/cern-display-controller.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Cern display controller design in my own project?

Its repository states no licence, so its author keeps all rights: ask sarahemm before reusing the design.