Tougou
- Size
- 42 × 47 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 50
- Nets
- 59
- Pads
- 222
- Tracks, vias
- 286, 42
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 29 Apr 2026
- Updated
- 29 Apr 2026
Overview
Tougou is an open-source printed circuit board by sanbungi, from the sanbungi/myslimetracker repository on GitHub. It is a 2-layer board of 42 × 47 mm with 50 parts on 59 nets, routed with 286 tracks and 42 vias.
It is built around the ESP32-C3-MINI-1-N4 and XC6210B332MR. Its parts include 13 resistors, 11 capacitors, 9 connectors, 4 ICs and 3 diodes. It belongs with the ESP32 and RISC-V boards of this library.
Main components
2ESP32-C3-MINI-1-N4
SMD,16.6x13.2mm-40℃~+85℃ -98dBm 20.5dBm 350mA 3V~3.6V 84mA Integrated temperature sensor、Integrated antenna、Built-in watchdog On-board PCB Antenna SPI、UART、I2C、I2S、USB Transceiver SMD,16.6x13.2mm WiFi Modules ROHSEspressif SystemsRF ModulesXC6210B332MR
SOT-23-5-40℃~+85℃@(Ta) 1 25uA 3.3V 450mV@(800mA) 5.5V 70dB@(1kHz) 800mA Fixed Over Current Protection、Over Temperature Protection Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTECH PUBLICVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
README.md3次元移動解析装置 改 — 乾電池駆動 SlimeVR トラッカー
VR ヘッドセットだけでは追跡できない足や腰の動きを取るための、自作 SlimeVR 互換フルボディトラッカーです。両足先・両膝・腰・胸の6点に装着し、VRChat 上でのフルトラッキングを実現しています。
- 単3乾電池駆動 — リチウムポリマー電池のリスクを避け、安全で入手しやすい乾電池で動作
- 最上級 IMU 搭載 — SlimeVR 対応 IMU の中で最高性能の LSM6DSV を採用
- 低コスト — mocopi(5万円〜)に対し、6トラッカーを合計約2万円で制作
- 高い拡張性 — SlimeVR はトラッカー数に制限がなく、必要に応じて増設可能
現行基板の3Dレンダリング(KiCad)
https://github.com/user-attachments/assets/3b7e9f30-eae3-4ba1-b326-60af60dc9e0d
VRChat 内でのフルボディトラッキング動作
乾電池へのこだわり
SlimeVR トラッカーの自作例はほとんどがリチウムポリマー電池を電源としていますが、本プロジェクトでは 単3乾電池 を採用しています。発火・膨張のリスクがなく、どこでも手に入り、近年は充電式乾電池(eneloop 等)も安価に出回っているため、ランニングコストも実用的です。
現行版は単3電池2本で動作し、昇圧 DC-DC コンバータで MCU・IMU に必要な電圧を供給しています。
基板設計
回路設計と基板レイアウトは KiCad で行い、製造は JLCPCB に発注しています。
| 部品 | 型番 | 役割 |
|---|---|---|
| MCU | Xiao ESP32-C3 | Wi-Fi 通信・SlimeVR ファームウェアの実行 |
| IMU | LSM6DSV | 6軸慣性計測(加速度 + ジャイロ) |
| 昇圧 DC-DC(現行) | 秋月電子 XCL103 キット | 単3x2 の電圧を 5V に昇圧 |
| 昇圧 DC-DC(次期) | TPS61291 | 単3x1 の電圧を 3.3V に昇圧 |
次期バージョン(WIP)
単3乾電池1本 で駆動する次期基板を開発中です。昇圧回路・MCU・IMU を1枚の基板に統合し、さらなる小型化と軽量化を目指しています。就職活動のため一時中断中ですが、設計データは new_prototype/ に格納しています。
Gallery
6点トラッカーセット
実際に運用中の6点セット(両足先・両膝・腰・胸)
JLCPCB から届いた基板
JLCPCB に発注した基板の実物。
次期基板 — 単3x1 実験(WIP)
左: 単3乾電池1本用の次期統合基板 / 右: 部品実装後のイメージ
現行基板(単3x2)
KiCad 上での3Dレンダリング。昇圧ユニット・IMU・逆流防止回路を搭載。
Parts
50| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 0 | Resistor_SMD:R_0603_1608Metric | R6, R7, R9 |
| 3 | 680 | Resistor_SMD:R_0603_1608Metric | R11, R12, R13 |
| 3 | Conn_01x01 | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J1, J3, J4 |
| 3 | LED | LED_SMD:LED_0603_1608Metric | D1, D2, D3 |
| 3 | TBD | Capacitor_SMD:C_0603_1608Metric | C6, C7, C10 |
| 2 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C9, C11 |
| 2 | 100nF | Capacitor_SMD:C_0805_2012Metric | C4, C5 |
| 2 | 10K | Resistor_SMD:R_0603_1608Metric | R5, R10 |
| 2 | 10uF | Capacitor_SMD:C_0805_2012Metric | C1, C8 |
| 2 | 22uF | Capacitor_SMD:C_0805_2012Metric | C2, C3 |
| 2 | 4.7k | Resistor_SMD:R_0805_2012Metric | R1, R2 |
| 2 | 5.1K | Resistor_SMD:R_0603_1608Metric | R3, R4 |
| 2 | Jumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP4, JP5 |
| 2 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP6, JP7 |
| 1 | 3.3uH | Inductor_SMD:L_Taiyo-Yuden_MD-3030 | L1 |
| 1 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J10 |
| 1 | Conn_01x05_Pin | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J6 |
| 1 | Conn_01x07_Pin | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J5 |
| 1 | Conn_01x08_Pin | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J8 |
| 1 | ESP32-C3-MINI-1-N4 | esp32_C3:ESP32-C3-MINI-1_EXP | U4 |
| 1 | JP_PADS_DCDC+ | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP2 |
| 1 | JP_PADS_DCDC- | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP3 |
| 1 | LSM6DSV16BTR | Package_LGA:LGA-14_3x2.5mm_P0.5mm_LayoutBorder3x4y | U2 |
| 1 | RESET | Button_Switch_SMD:SW_Push_1P1T_NO_CK_KMR2 | SW3 |
| 1 | SW_DPDT_x2 | Button_Switch_THT:SW_E-Switch_EG1271_SPDT | SW1 |
| 1 | SW_Push | Button_Switch_SMD:SW_Push_1P1T_NO_CK_KMR2 | SW2 |
| 1 | TBD | Resistor_SMD:R_0603_1608Metric | R8 |
| 1 | TPS61291DRVR | tps61291:DRV0006A | U1 |
| 1 | UART | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J9 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_HCTL_HC-TYPE-C-16P-01A | J7 |
| 1 | XC6210B332MR | Package_TO_SOT_SMD:SOT-23-5 | U3 |
More from sanbungi/myslimetracker
4- 2 layers54.2 × 59 mm

- 2 layers50 × 50 mm

- 2 layers20 × 15 mm

- 2 layers42 × 60 mm

Similar boards
- 2 layers28 × 130 mm

OpenPixelPoi
Mitchlol/Open-Pixel-Poi
Open source, 3D printable, LED pixel Poi: PlatformIO / Flutter / KiCad / STLs
54 parts37GPL-3.0 - 4 layers29 × 54.4 mm

ESP32-S3-Breakout
eggsampler/ESP32-S3-Breakout
A minimal breakout board for the ESP32-S3-WROOM module
34 parts10MIT - 2 layers66.7 × 61.7 mm

Vday
niteshkadyan/Hearty-LED-Necklace-Badge
Kicad project files and Android app for the Hearty LED wearable necklace cum badge
179 parts10MIT - 4 layers56 × 56 mm

Stepper driver
matthewlai/ESP32Stepper
This is the PCB design and firmware for a Trinamic TMC2590-based stepper motor driver with an ESP32 microcontroller.
116 parts5Apache-2.0 - 4 layers80 × 40 mm

- 2 layers100 × 140 mm

Circle badge
bornhack/badge2025
This badge focuses on LoRa and wireless communication in general, as there are also WiFi and Bluetooth Low Energy included in the ESP32-C3 module.
45 parts3CC-BY-SA-4.0 - 2 layers149 × 224 mm

GDEK
GilDev/GDEK
Low-profile, compact, beginner-friendly, assembly-friendly 4×6 with 5-keys thumb cluster ergonomic keyboard with universal keyswitch support, per-key RGB LED, encoder and RP2040 controller. Phew, that’s a lot!
324 parts3CERN-OHL-S-2.0 - 4 layers46 × 100 mm

Questions
How big is the Tougou PCB?
It measures 42 × 47 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Tougou use?
50 parts, built around the ESP32-C3-MINI-1-N4 and XC6210B332MR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Tougou KiCad files?
From the sanbungi/myslimetracker repository on GitHub, at the commit this page was made from: the board is new_prototype/tougou/tougou.kicad_pcb and its schematic my_trakcer/v4/my_trakcer.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Tougou design in my own project?
Its repository states no licence, so its author keeps all rights: ask sanbungi before reusing the design.