Skip to the content
2 layers42 × 47 mmTougou, the printed circuit board in 3D
Size
42 × 47 mm
Copper layers
2
Thickness
1.6 mm
Parts
50
Nets
59
Pads
222
Tracks, vias
286, 42
Pours
6
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
29 Apr 2026
Updated
29 Apr 2026

Overview

Tougou is an open-source printed circuit board by sanbungi, from the sanbungi/myslimetracker repository on GitHub. It is a 2-layer board of 42 × 47 mm with 50 parts on 59 nets, routed with 286 tracks and 42 vias.

It is built around the ESP32-C3-MINI-1-N4 and XC6210B332MR. Its parts include 13 resistors, 11 capacitors, 9 connectors, 4 ICs and 3 diodes. It belongs with the ESP32 and RISC-V boards of this library.

Main components

2

README

README.md

3次元移動解析装置 改 — 乾電池駆動 SlimeVR トラッカー

VR ヘッドセットだけでは追跡できない足や腰の動きを取るための、自作 SlimeVR 互換フルボディトラッカーです。両足先・両膝・腰・胸の6点に装着し、VRChat 上でのフルトラッキングを実現しています。

  • 単3乾電池駆動 — リチウムポリマー電池のリスクを避け、安全で入手しやすい乾電池で動作
  • 最上級 IMU 搭載 — SlimeVR 対応 IMU の中で最高性能の LSM6DSV を採用
  • 低コスト — mocopi(5万円〜)に対し、6トラッカーを合計約2万円で制作
  • 高い拡張性 — SlimeVR はトラッカー数に制限がなく、必要に応じて増設可能

現行版 PCB 3Dレンダリング

現行基板の3Dレンダリング(KiCad)

https://github.com/user-attachments/assets/3b7e9f30-eae3-4ba1-b326-60af60dc9e0d

VRChat 内でのフルボディトラッキング動作

乾電池へのこだわり

SlimeVR トラッカーの自作例はほとんどがリチウムポリマー電池を電源としていますが、本プロジェクトでは 単3乾電池 を採用しています。発火・膨張のリスクがなく、どこでも手に入り、近年は充電式乾電池(eneloop 等)も安価に出回っているため、ランニングコストも実用的です。

現行版は単3電池2本で動作し、昇圧 DC-DC コンバータで MCU・IMU に必要な電圧を供給しています。

基板設計

回路設計と基板レイアウトは KiCad で行い、製造は JLCPCB に発注しています。

部品型番役割
MCUXiao ESP32-C3Wi-Fi 通信・SlimeVR ファームウェアの実行
IMULSM6DSV6軸慣性計測(加速度 + ジャイロ)
昇圧 DC-DC(現行)秋月電子 XCL103 キット単3x2 の電圧を 5V に昇圧
昇圧 DC-DC(次期)TPS61291単3x1 の電圧を 3.3V に昇圧

次期バージョン(WIP)

単3乾電池1本 で駆動する次期基板を開発中です。昇圧回路・MCU・IMU を1枚の基板に統合し、さらなる小型化と軽量化を目指しています。就職活動のため一時中断中ですが、設計データは new_prototype/ に格納しています。


Gallery

6点トラッカーセット

6点トラッカーセット実物

実際に運用中の6点セット(両足先・両膝・腰・胸)

JLCPCB から届いた基板

JLCPCBから届いた基板

JLCPCB に発注した基板の実物。

次期基板 — 単3x1 実験(WIP)

次期版 PCB 3Dレンダリング SlimeVR Dev Board レンダリング

左: 単3乾電池1本用の次期統合基板 / 右: 部品実装後のイメージ

現行基板(単3x2)

現行版 PCB 3Dレンダリング

KiCad 上での3Dレンダリング。昇圧ユニット・IMU・逆流防止回路を搭載。

Parts

50
QtyValueFootprintReferences
30Resistor_SMD:R_0603_1608MetricR6, R7, R9
3680Resistor_SMD:R_0603_1608MetricR11, R12, R13
3Conn_01x01Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_VerticalJ1, J3, J4
3LEDLED_SMD:LED_0603_1608MetricD1, D2, D3
3TBDCapacitor_SMD:C_0603_1608MetricC6, C7, C10
20.1uFCapacitor_SMD:C_0603_1608MetricC9, C11
2100nFCapacitor_SMD:C_0805_2012MetricC4, C5
210KResistor_SMD:R_0603_1608MetricR5, R10
210uFCapacitor_SMD:C_0805_2012MetricC1, C8
222uFCapacitor_SMD:C_0805_2012MetricC2, C3
24.7kResistor_SMD:R_0805_2012MetricR1, R2
25.1KResistor_SMD:R_0603_1608MetricR3, R4
2Jumper_2_OpenJumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mmJP4, JP5
2SolderJumper_2_OpenJumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mmJP6, JP7
13.3uHInductor_SMD:L_Taiyo-Yuden_MD-3030L1
1Conn_01x02_PinConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ10
1Conn_01x05_PinConnector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_VerticalJ6
1Conn_01x07_PinConnector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_VerticalJ5
1Conn_01x08_PinConnector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_VerticalJ8
1ESP32-C3-MINI-1-N4esp32_C3:ESP32-C3-MINI-1_EXPU4
1JP_PADS_DCDC+Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mmJP2
1JP_PADS_DCDC-Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mmJP3
1LSM6DSV16BTRPackage_LGA:LGA-14_3x2.5mm_P0.5mm_LayoutBorder3x4yU2
1RESETButton_Switch_SMD:SW_Push_1P1T_NO_CK_KMR2SW3
1SW_DPDT_x2Button_Switch_THT:SW_E-Switch_EG1271_SPDTSW1
1SW_PushButton_Switch_SMD:SW_Push_1P1T_NO_CK_KMR2SW2
1TBDResistor_SMD:R_0603_1608MetricR8
1TPS61291DRVRtps61291:DRV0006AU1
1UARTConnector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_VerticalJ9
1USB_C_Receptacle_USB2.0_16PConnector_USB:USB_C_Receptacle_HCTL_HC-TYPE-C-16P-01AJ7
1XC6210B332MRPackage_TO_SOT_SMD:SOT-23-5U3

More from sanbungi/myslimetracker

4

Similar boards

  • 2 layers28 × 130 mmOpenPixelPoi, the printed circuit board in 3D

    OpenPixelPoi

    Mitchlol/Open-Pixel-Poi

    Open source, 3D printable, LED pixel Poi: PlatformIO / Flutter / KiCad / STLs

    54 parts37GPL-3.0
  • 4 layers29 × 54.4 mmESP32-S3-Breakout, the printed circuit board in 3D

    ESP32-S3-Breakout

    eggsampler/ESP32-S3-Breakout

    A minimal breakout board for the ESP32-S3-WROOM module

    34 parts10MIT
  • 2 layers66.7 × 61.7 mmVday, the printed circuit board in 3D

    Vday

    niteshkadyan/Hearty-LED-Necklace-Badge

    Kicad project files and Android app for the Hearty LED wearable necklace cum badge

    179 parts10MIT
  • 4 layers56 × 56 mmStepper driver, the printed circuit board in 3D

    Stepper driver

    matthewlai/ESP32Stepper

    This is the PCB design and firmware for a Trinamic TMC2590-based stepper motor driver with an ESP32 microcontroller.

    116 parts5Apache-2.0
  • 4 layers80 × 40 mmSchem 1, the printed circuit board in 3D

    Schem 1

    can-caglar/dashcam

    An esp32 based low-cost IoT car dash-cam.

    90 parts4
  • 2 layers100 × 140 mmCircle badge, the printed circuit board in 3D

    Circle badge

    bornhack/badge2025

    This badge focuses on LoRa and wireless communication in general, as there are also WiFi and Bluetooth Low Energy included in the ESP32-C3 module.

    45 parts3CC-BY-SA-4.0
  • 2 layers149 × 224 mmGDEK, the printed circuit board in 3D

    GDEK

    GilDev/GDEK

    Low-profile, compact, beginner-friendly, assembly-friendly 4×6 with 5-keys thumb cluster ergonomic keyboard with universal keyswitch support, per-key RGB LED, encoder and RP2040 controller. Phew, that’s a lot!

    324 parts3CERN-OHL-S-2.0
  • 4 layers46 × 100 mmMusic32v3, the printed circuit board in 3D

    Music32v3

    Thecactusman0/Music32-V3

    Portable music player

    183 parts3GPL-3.0

Questions

How big is the Tougou PCB?

It measures 42 × 47 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Tougou use?

50 parts, built around the ESP32-C3-MINI-1-N4 and XC6210B332MR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Tougou KiCad files?

From the sanbungi/myslimetracker repository on GitHub, at the commit this page was made from: the board is new_prototype/tougou/tougou.kicad_pcb and its schematic my_trakcer/v4/my_trakcer.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Tougou design in my own project?

Its repository states no licence, so its author keeps all rights: ask sanbungi before reusing the design.