Skip to the content
2 layers65 × 85 mmReMix interface, the printed circuit board in 3D

I want to build a mixer for my PC with four faders, mute buttons and 6.35‑mm audio jacks. I have taken apart a faulty mixer and photographed its boards so that I can spot parts that I might reuse. Those parts still need to be tested. I plan to design the circuit in KiCad and to make a 3D‑printed enclosure.

Size
65 × 85 mm
Copper layers
2
Thickness
1.6 mm
Parts
41
Nets
18
Pads
82
Tracks, vias
71, 0
Pours
1
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
21 Oct 2026
Updated
25 Oct 2026

Overview

ReMix interface is an open-source printed circuit board by samurayxray, from the samurayxray/ReMix-DIY-Audio-Mixer repository on GitHub. It is a 2-layer board of 65 × 85 mm with 41 parts on 18 nets, routed with 71 tracks and 0 vias.

Its parts include 17 connectors, 16 resistors and 4 capacitors. It belongs with the audio and music and interfaces and adapters boards of this library.

README

elettrical part/readme.md

I’m tired of writing README files for electronic circuit boards.

Parts

41
QtyValueFootprintReferences
810kReMix:R_Axial_P7.62mmR9, R10, R11, R12, R13, R14, R15, R16
4100nReMix:C_Radial_P2.50mmC1, C2, C3, C4
41MReMix:R_Axial_P7.62mmR5, R6, R7, R8
41kReMix:R_Axial_P7.62mmR1, R2, R3, R4
4AL LINEIN CODECReMix:Port_1x02J14, J15, J16, J17
4M2.5 CLEARANCEH1, H2, H3, H4
13V3 DAL TEENSYReMix:Port_1x02J1
1ADC 1 AL TEENSYReMix:Port_1x02J6
1ADC 2 AL TEENSYReMix:Port_1x02J7
1ADC 3 AL TEENSYReMix:Port_1x02J8
1ADC 4 AL TEENSYReMix:Port_1x02J9
1AUX L TIP/SLEEVEReMix:Port_1x02J12
1AUX R TIP/SLEEVEReMix:Port_1x02J13
1FADER 1 - CABLAGGIO DA MISURAREReMix:Port_1x03J2
1FADER 2 - CABLAGGIO DA MISURAREReMix:Port_1x03J3
1FADER 3 - CABLAGGIO DA MISURAREReMix:Port_1x03J4
1FADER 4 - CABLAGGIO DA MISURAREReMix:Port_1x03J5
1PC L TIP/SLEEVEReMix:Port_1x02J10
1PC R TIP/SLEEVEReMix:Port_1x02J11

Similar boards

  • 2 layers70 × 35 mmTLF35584 breakout, the printed circuit board in 3D

    TLF35584 breakout

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    41 parts1.2k
  • 2 layers270 × 11 mmDaylight Disco, the printed circuit board in 3D

    Daylight Disco

    VoronDesign/Voron-Hardware

    Cool Hardware designed by the Voron Design group

    41 parts1.1kGPL-3.0
  • 2 layers27.5 × 48.3 mmICE40DevBoard, the printed circuit board in 3D

    ICE40DevBoard

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    41 parts915
  • 2 layers45 × 25 mmEasy PD Sink, the printed circuit board in 3D

    Easy PD Sink

    openwch/ch32v003

    CH32V003 is an ultra-cheap RISC-V MCU with 2KB SRAM, 16KB flash, and up to 18 GPIOs that sells for under $0.10

    41 parts599
  • 2 layers97 × 78.5 mmDumbpad, the printed circuit board in 3D

    Dumbpad

    imchipwood/dumbpad

    Simple 4x4 numpad with rotary encoder. Powered by QMK via ATmega32u4 Pro Micro

    41 parts517GPL-2.0
  • 2 layers37 × 15 mmCanTactDist, the printed circuit board in 3D

    CanTactDist

    bondus/KlipperToolboard

    A 3D printer tool head controller board

    41 parts373GPL-3.0
  • 2 layers20.3 × 69.7 mmPG attiny404, the printed circuit board in 3D

    PG attiny404

    fabiansteiner/OpenValve

    3D-printable pinch valve for irrigation and sensor-driven liquid control.

    41 parts276CERN-OHL-S-2.0

Questions

How big is the ReMix interface PCB?

It measures 65 × 85 mm and has 2 copper layers, 1.6 mm thick.

What parts does the ReMix interface use?

41 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the ReMix interface KiCad files?

From the samurayxray/ReMix-DIY-Audio-Mixer repository on GitHub, at the commit this page was made from: the board is elettrical part/ReMix-interface.kicad_pcb and its schematic elettrical part/ReMix-interface.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the ReMix interface design in my own project?

Its repository states no licence, so its author keeps all rights: ask samurayxray before reusing the design.