
Switch
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

Once assembled, the system works as described : - a long press will retract the arm - a double press will extend the arm - a simple press will stop the arm
AirGo is an open-source printed circuit board by samp38, from the samp38/airgo_firmware repository on GitHub. It is a 2-layer board of 61 × 55.9 mm with 6 parts on 35 nets, routed with 44 tracks and 1 via.
Its parts include 4 connectors and 1 IC.
This setup mean to drive a retractable arm that hold a joystick needed to stir an electrical weelchair. The arm can be retracted/extended to its end positions or stopped inbetween. The system is composed of :
Once assembled, the system works as described :
The system works on 7.4 Li-Ion battery, but the arduino mini pro is powered by one cell only on its RAW input, to shunt the voltage regulator. You also have to remove the led on the arduino, so it won't draw current during deep sleep. With this setup, we're able to draw 5 uA in deep sleep mode. As the arduino mini pro doesn't have a usb2serial chip, you will have to program it with an external programmer (arduino as isp, ftdi...).


| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | Screw_Terminal_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1, J3, J4 |
| 1 | Clone_Pro_Mini_Socket | PCM_arduino-library:Clone_Pro_Mini_Socket | A1 |
| 1 | Conn_01x05_Socket | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J2 |
| 1 | DRV8838 - pololu2990 | Package_DIP:DIP-10_W7.62mm_LongPads | U2 |

byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.


Jcparkyn/dpoint
Open-source digital stylus using camera tracking and inertial measurements

VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

It measures 61 × 55.9 mm and has 2 copper layers, 1.6 mm thick.
6 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the samp38/airgo_firmware repository on GitHub, at the commit this page was made from: the board is electronics/AirGo.kicad_pcb and its schematic electronics/AirGo.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask samp38 before reusing the design.