2 layers107 × 62 mm
2 layers98 × 53 mm
Motion Controller
SamnangKong426/motion_controller_pcb- Size
- 98 × 53 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 24
- Nets
- 41
- Pads
- 87
- Tracks, vias
- 89, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 18 Sep 2024
- Updated
- 18 Sep 2024
Overview
Motion Controller is an open-source printed circuit board by SamnangKong426, from the SamnangKong426/motion_controller_pcb repository on GitHub. It is a 2-layer board of 98 × 53 mm with 24 parts on 41 nets, routed with 89 tracks and 0 vias.
It is built around the HLK-5M05 and SM4007. Its parts include 6 connectors, 4 resistors, 4 diodes, 2 transistors and 2 switches. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
2README
README.mdmotion_controller_pcb
Parts
24| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad | H1, H2, H3, H4 |
| 2 | 10K | Resistor_SMD:R_0603_1608Metric | R2, R4 |
| 2 | 470 | Resistor_SMD:R_0603_1608Metric | R1, R3 |
| 2 | AO3480_(A09T) | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 2 | LED | LED_SMD:LED_0603_1608Metric | D3, D4 |
| 2 | SANYOU_SRD_Form_C | Relay_THT:Relay_SPDT_SANYOU_SRD_Series_Form_C | K1, K2 |
| 2 | SM4007 | Diode_SMD:D_SMA | D1, D2 |
| 1 | AC | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J6 |
| 1 | Arduino_Nano_v3.x | Module:Arduino_Nano | A1 |
| 1 | HLK-5M05 | KiCad:CONV_HLK-5M05 | PS1 |
| 1 | LIGHT1 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-3-5.08_1x03_P5.08mm_Horizontal | J1 |
| 1 | LIGHT2 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-3-5.08_1x03_P5.08mm_Horizontal | J2 |
| 1 | MOTION1 | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J3 |
| 1 | MOTION2 | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J4 |
| 1 | MOTION3 | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J5 |
Questions
How big is the Motion Controller PCB?
It measures 98 × 53 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Motion Controller use?
24 parts, built around the HLK-5M05 and SM4007. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Motion Controller KiCad files?
From the SamnangKong426/motion_controller_pcb repository on GitHub, at the commit this page was made from: the board is Motion_Controller.kicad_pcb and its schematic Motion_Controller.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Motion Controller design in my own project?
Its repository states no licence, so its author keeps all rights: ask SamnangKong426 before reusing the design.
Similar boards
- 2 layers55 × 84.4 mm
- 4 layers100 × 80 mm
Plc board
denorath-sys/gridnet
Open hardware powerline mesh communication terminal
62 parts5CERN-OHL-W-2.0 - 2 layers44 × 107 mm
Energy Meter
sachith-pai/Smart-3-Phase-Energy-Meter
An esphome/Zigbee based energy meter powered by PZEM-004T V4 and Xiao Esp32 c6
15 parts3MIT - 2 layers68.6 × 48.6 mm
Stm32 esp iot
Kikkiu17/espiot
A small board built to measure current and voltage of any appliance.
55 parts2 - 2 layers101.5 × 54.9 mm
- 2 layers80 × 60 mm
PCB Reflow Hot Plate
bjkayani/PCB-Reflow-Hot-Plate
The PCB Reflow Hot Plate is a temperature controlled 120 x 70 mm hot plate designed to reflow solder SMD circuit boards.
70 parts1 - 4 layers66.6 × 86.6 mm
DPSin Board WiFi Triac
gmeirelles-ops/esp32-DPTri
Firmware ESP-IDF para a DPSin Board WiFi Triac (rev v1.0.1): relé AC ON/OFF e dimmer TRIAC por porcentagem, controlados pelo app, com pareamento por hold ≥10 s no botão PAIR.
62 parts1