

2532-ROM adapter
Schematics for a 2532 ROM adapter
- Size
- 19 × 33 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 3
- Nets
- 24
- Pads
- 48
- Tracks, vias
- 57, 0
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 30 Sep 2025
- Updated
- 30 Sep 2025
Overview
2532-ROM adapter is an open-source printed circuit board by sammothxc, from the sammothxc/2532-ROM-adapter repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 19 × 33 mm with 3 parts on 24 nets, routed with 57 tracks and 0 vias.
Its parts include 2 connectors and 1 IC. It belongs with the interfaces and adapters boards of this library.
README
README.md2532-ROM-adapter
Schematics for a 2532 ROM adapter
Parts
3| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | Conn_01x12_Pin | Connector_PinHeader_2.54mm:PinHeader_1x12_P2.54mm_Vertical | J1, J2 |
| 1 | 2532_EPROM | Package_DIP:DIP-24_W15.24mm | U2 |
Similar boards
- 2 layers40 × 30 mm

- 2 layers51.9 × 16 mm

Passive2-rpi non standard adapter
hzeller/rpi-rgb-led-matrix
Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO
3 parts4.4kGPL-2.0 - 2 layers16.3 × 16.3 mm

- 2 layers

Sub
atopile/atopile
Design circuit boards with code! ✨ Get software-like design reuse 🚀, validation, version control and collaboration in hardware; starting with electronics ⚡️
3 parts4kMIT - 2 layers85 × 30 mm

- 2 layers124.5 × 33.7 mm

- 2 layers10.5 × 83 mm

- 2 layers21.2 × 51.3 mm

Pico reset
hackclub/sprig
🍃 Learn to code by making games in a JavaScript web-based game editor.
3 parts1.1kMIT
Questions
How big is the 2532-ROM adapter PCB?
It measures 19 × 33 mm and has 2 copper layers, 1.6 mm thick.
What parts does the 2532-ROM adapter use?
3 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the 2532-ROM adapter KiCad files?
From the sammothxc/2532-ROM-adapter repository on GitHub, at the commit this page was made from: the board is 2532-ROM-adapter.kicad_pcb and its schematic 2532-ROM-adapter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the 2532-ROM adapter design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).