This is my own custom development board, made for the ATmega328P. I created this both as learning experience (in PCB design and in soldering SMD components), and as a practical device to assist in prototyping.
Devboard is an open-source printed circuit board by sam-james-harding, from the sam-james-harding/atmega328p-devboard repository on GitHub, published under the MIT licence. It is a 2-layer board of 26.7 × 87.8 mm with 24 parts on 44 nets, routed with 232 tracks and 23 vias.
It is built around the ATMEGA328P-PU. Its parts include 5 capacitors, 4 resistors, 4 diodes, 4 connectors and 3 ICs. It belongs with the microcontroller boards boards and the AVR (ATmega, ATtiny) boards of this library.
This is my own custom development board, made for the ATmega328P. I created this both as learning experience (in PCB design and in soldering SMD components), and as a practical device to assist in prototyping.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 200Ω | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R3, R4 |
| 2 | 10pF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2 |
| 2 | 4.7μF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C4 |
| 2 | Conn_01x15_Pin | Connector_PinHeader_2.54mm:PinHeader_1x15_P2.54mm_Vertical | J3, J4 |
| 2 | SW_SPDT | devboard:slide_switch | SW2, SW3 |
| 1 | 10KΩ | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | 1μF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5 |
| 1 | ATmega328P-P | Package_DIP:DIP-28_W7.62mm | U1 |
| 1 | AVR-ISP-6 | Connector_IDC:IDC-Header_2x03_P2.54mm_Vertical | J2 |
| 1 | Crystal | Crystal:Crystal_HC49-U_Vertical | Y1 |
| 1 | D_Schottky | Diode_SMD:D_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
| 1 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D4 |
| 1 | LED_RX | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D3 |
| 1 | LED_TX | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D2 |
| 1 | MCP1825S | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | MCP2221AxST | Package_SO:TSSOP-14_4.4x5mm_P0.65mm | U2 |
| 1 | Pushbutton | Button_Switch_THT:SW_PUSH_6mm | SW1 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Amphenol_10118194_Horizontal | J1 |
It measures 26.7 × 87.8 mm and has 2 copper layers, 1.6 mm thick.
24 parts, built around the ATMEGA328P-PU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the sam-james-harding/atmega328p-devboard repository on GitHub, at the commit this page was made from: the board is rev_1/devboard/devboard.kicad_pcb and its schematic rev_1/devboard/devboard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
sam-james-harding/atmega328p-devboard
This is my own custom development board, made for the ATmega328P. I created this both as learning experience (in PCB design and in soldering SMD components), and as a practical device to assist in prototyping.
zmaker/arduino_cookbook
gli sketch del nuovo progetto Arduino Cookbook e dei video di YouTube
coseyfannitutti/discipad
17-key numpad assembled with only through hole components, including usb type-c
matthewcieplak/super-sixteen
Code and schematics for the Super Sixteen Eurorack sequencer
coseyfannitutti/romeo
Staggered 40% keyboard pcb that can be assembled with only through hole components, including USB Type-C
mattybrad/drumkid
Version 4 was the first successful working design, with full code, schematics, Gerbers, etc available on GitHub.
leomil72/LM80C
A Z80-based homebrew computer withTMS9918, AY-3-8910, Z80 CTC, Z80 PIO, and Z80 SIO
