2 layers45.3 × 46 mm
4 layers84 × 74.5 mm
Linuxpocket.kicad pcb largebott
sam-chami/zPocket5Modular, pocket computer.
- Size
- 84 × 74.5 mm
- Copper layers
- 4
- Thickness
- 1.04 mm
- Parts
- 92
- Nets
- 252
- Pads
- 751
- Tracks, vias
- 593, 48
- Pours
- 10
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 26 Jan 2025
- Updated
- 17 Mar 2025
Overview
Linuxpocket.kicad pcb largebott is an open-source printed circuit board by sam-chami, from the sam-chami/zPocket repository on GitHub. It is a 4-layer board of 84 × 74.5 mm with 92 parts on 252 nets, routed with 593 tracks and 48 vias.
It is built around the ATMEGA32U4-MU, FUSB302BUCX and LIS2MDL, with the MT3608L, H5VL10B and TPD4E02B04DQAR among its other parts. Its parts include 32 capacitors, 23 resistors, 12 diodes, 9 ICs and 4 connectors. It belongs with the computers and single-board computers boards and the AVR (ATmega, ATtiny) and Raspberry Pi (Linux) boards of this library.
Main components
8
ATMEGA32U4-MU
VQFN-44-EP(7x7)-40℃~+85℃ 10bit 16MHz 1KB 2.5KB 2.7V~5.5V 26 32KB 8 Bit AVR Built-in FLASH VQFN-44-EP(7x7) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
FUSB302BUCX
WLCSP-9(1.2x1.3)-40℃~+85℃ 2.8V~5.5V 25uA 25uA Controller USB 3.1 WLCSP-9(1.2x1.3) USB Converters ROHSonsemiUSB Converters
LIS2MDL
LGA-12(2x2)-40℃~+85℃ 1.71V~3.6V 16bit 200uA I2C、SPI ±5mT ±5mT LGA-12(2x2) 3D Magnetic Sensors ROHSSTMicroelectronics3D Magnetic Sensors
MT3608L
SOT-23-6-40℃~+85℃@(TA) 1 1.2MHz 100uA 2.2V~16V 2.5A Adjustable Boost Boost Built-in No SOT-23-6 DC-DC Converters ROHSXI'AN Aerosemi TechDC-DC Converters
H5VL10B
DFN1006-2L-55℃~+125℃ 1 100nA 10V 15pF 5.6V 50W 5A 5V Bidirectional ESD IEC 61000-4-2、IEC 61000-4-5 DFN1006-2L ESD and Surge Protection (TVS/ESD) ROHShongjiachengESD And Surge Protection (TVS/ESD)
TPD4E02B04DQAR
USON-10(1x2.5)-40℃~+125℃ 0.33pF 10nA 17W@8/20us 2A@8/20us 3.6V 7.5V 8.8V Bidirectional Four channels IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 TVS USON-10(1x2.5) ESD and Surge Protection (TVS/ESD) ROHSTexas InstrumentsESD And Surge Protection (TVS/ESD)
MMBT3904
SOT-23-55℃~+150℃ 1 NPN 100 100nA 200mA 200mW 300MHz 300mV 40V 6V NPN SOT-23 Bipolar (BJT) ROHSJiangsu Changjing Electronics Technology (CJ)Bipolar (BJT)
XDSM-1035-08-KT
SMD-40℃~+85℃ 1.35mm Connector and Ejector Nano-SIM Card Tray With Card Detect SMD SIM Card Connectors ROHSLian Xin TechnologySIM Card Connectors
README
README.mdzPocket
WIP
The zPocket is a modular, handheld portable Linux device with a square touchscreen as well as keyboard for input. The modularity allows you to use it as a Cyberdeck, Phone, or even satellite communicator.
Significant features:
- Touchscreen 720x720 panel
- Blackberry Q10 Keyboard
- Raspberry Pi Compute Module 5
- Mini PCIe connector
- USB-C Dual-role Port and mini HDMI
- Magnetometer (Compass)
- Battery Charging and Gauge
Assembly Render
| Front | Back |
|---|---|
 |  |
PCB
Documentation
The documentation is available in this repository's wiki page
License
The zPocket hardware has a "CERN Open Hardware Licence Version 2 - Strongly Reciprocal".
Parts
92| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 10k | Resistor_SMD:R_0402_1005Metric | R1, R2, R3, R5, R9, R10, R11, R15, R16, R17, R21 |
| 8 | 1uF | Capacitor_SMD:C_0402_1005Metric | C2, C10, C17, C18, C19, C22, C27, C28 |
| 6 | 10uF | Capacitor_SMD:C_0402_1005Metric | C1, C4, C6, C7, C11, C32 |
| 6 | H5VL10B | Diode_SMD:D_SOD-882 | D6, D7, D8, D9, D10, D12 |
| 5 | 22uF | Capacitor_SMD:C_0603_1608Metric | C8, C12, C20, C21, C26 |
| 4 | 47nF | Capacitor_SMD:C_0603_1608Metric | C3, C23, C24, C25 |
| 4 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP1, TP2, TP3, TP4 |
| 3 | 33pF | Capacitor_SMD:C_0402_1005Metric | C14, C15, C16 |
| 3 | 4.7k | Resistor_SMD:R_0402_1005Metric | R25, R26, R27 |
| 3 | PUSH | linuxpocket:SW-SMD_GT-TC020B-H035-L05 | SW1, SW2, SW3 |
| 3 | TPD4E02B04DQAR | linuxpocket:USON-10_L2.5-W1.0-P0.50-BL | D4, D5, D11 |
| 2 | 22 | Resistor_SMD:R_0402_1005Metric | R4, R22 |
| 2 | 220pF | Capacitor_SMD:C_0402_1005Metric | C29, C30 |
| 2 | 4.7uF | Capacitor_SMD:C_0402_1005Metric | C5, C9 |
| 1 | 0.47uH | linuxpocket:L1008 | L2 |
| 1 | 100k | Resistor_SMD:R_0402_1005Metric | R19 |
| 1 | 10mΩ | Resistor_SMD:R_0402_1005Metric | R12 |
| 1 | 120 | Resistor_SMD:R_0402_1005Metric | R6 |
| 1 | 15k | Resistor_SMD:R_0402_1005Metric | R20 |
| 1 | 2.2uH | linuxpocket:IND-SMD_L4.4-W4.2 | L1 |
| 1 | 220nF | Capacitor_SMD:C_0402_1005Metric | C31 |
| 1 | 4.7 | Resistor_SMD:R_0402_1005Metric | R18 |
| 1 | 470uF | Capacitor_Tantalum_SMD:CP_EIA-7343-31_Kemet-D | C13 |
| 1 | 510k | Resistor_SMD:R_0402_1005Metric | R13 |
| 1 | 91k | Resistor_SMD:R_0603_1608Metric | R14 |
| 1 | ATmega32U4-M | Package_DFN_QFN:QFN-44-1EP_7x7mm_P0.5mm_EP5.2x5.2mm | U8 |
| 1 | BBQ10KBD | linuxpocket:BM14B(0.8)-24DS-0.4V(53) | U7 |
| 1 | BQ24295RGER | linuxpocket:VQFN-24_L4.0-W4.0-P0.50-TL-EP2.8 | U1 |
| 1 | BQ27426YZFR | linuxpocket:DSBGA-9_L1.5-W1.5-R3-C3-P0.50-BL | U2 |
| 1 | Bus_PCI_Express_Mini | Connector_PCBEdge:BUS_PCI_Express_Mini_Full | J2 |
| 1 | ComputeModule4-CM4 | linuxpocket:Raspberry-Pi-4-Compute-Module | Module1 |
| 1 | D_Schottky | Diode_SMD:D_SOD-323 | D2 |
| 1 | D_Schottky | Diode_SMD:D_SMA | D3 |
| 1 | FUSB302BUCX | linuxpocket:WLCSP-9_L1.3-W1.2-R3-C3-P0.40-TL | U6 |
| 1 | HDMI_C_1.4 | linuxpocket:HDMI-SMD_A71-05H4-111N1 | J3 |
| 1 | LED | Inductor_SMD:L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1 |
| 1 | LIS2MDL | Package_LGA:LGA-12_2x2mm_P0.5mm | U9 |
| 1 | MMBT3904 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | MT3608L | linuxpocket:SOT-23-6_L2.9-W1.6-P0.95-LS2.8-BL_3 | U5 |
| 1 | TPS61169DCKR | linuxpocket:SC-70-5_L2.1-W1.3-P0.65-LS2.1-BR | U4 |
| 1 | TPS63805YFFR | linuxpocket:DSBGA-15_L2.3-W1.3-R5-C3-P0.40-TL | U3 |
| 1 | USB_C_Receptacle_USB2.0_14P | linuxpocket:USB-SMD_TYPE-C16PIN-1 | J4 |
| 1 | XDSM-1035-08-KT | linuxpocket:SIM-SMD_XDSM-1035-08_1 | J1 |
| 1 | XF2M-4015-1A_C225713 | linuxpocket:FPC-SMD_40P-P0.50_L4.9-W23.5 | FPC1 |
Questions
How big is the Linuxpocket.kicad pcb largebott PCB?
It measures 84 × 74.5 mm and has 4 copper layers, 1.04 mm thick.
What parts does the Linuxpocket.kicad pcb largebott use?
92 parts, built around the ATMEGA32U4-MU, FUSB302BUCX, LIS2MDL and MT3608L. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Linuxpocket.kicad pcb largebott KiCad files?
From the sam-chami/zPocket repository on GitHub, at the commit this page was made from: the board is linuxpocket.kicad/linuxpocket.kicad_pcb_largebott.kicad_pcb and its schematic linuxpocket.kicad/Power.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Linuxpocket.kicad pcb largebott design in my own project?
Its repository states no licence, so its author keeps all rights: ask sam-chami before reusing the design.
Similar boards
- 6 layers133 × 92 mm
Motherboard
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.
264 parts4.3kMIT - 4 layers282 × 129 mm
- 2 layers17.8 × 25.4 mm
- 4 layers99 × 60 mm
Grip strength meter
houseofbigseals/grip_strength_meter_pcb
schematic and pcb for custom esp32 grip strength meter project
123 parts - 4 layers69.8 × 16.4 mm
- 2 layers182.6 × 130.9 mm
Blackmacro base
KipJM/blackmacro-hardware
An open source, smaller, more configurable, and more capabable video editing keyboard based on the raspberry Pi Pico 2W.
189 parts29CERN-OHL-W-2.0 - 2 layers50 × 50 mm
