2 layers55 × 80 mm
Board esp32 v2
sudomesh/disaster-radio
A (paused) work-in-progress long-range, low-bandwidth wireless disaster recovery mesh network powered by the sun.
101 parts1.1k
2 layers130.6 × 87.8 mm
Classic
SalveVale/classicsplit keyboard
- Size
- 130.6 × 87.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 101
- Nets
- 89
- Pads
- 563
- Tracks, vias
- 456, 33
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 23 May 2024
- Updated
- 24 May 2024
Overview
Classic is an open-source printed circuit board by SalveVale, from the SalveVale/classic repository on GitHub. It is a 2-layer board of 130.6 × 87.8 mm with 101 parts on 89 nets, routed with 456 tracks and 33 vias.
Its parts include 66 diodes, 33 switches and 2 ICs. It belongs with the keyboards and input boards and the RP2040 boards of this library.
README
readme.mdclassic
A short description of the keyboard/project
- Keyboard Maintainer: [Ben Powell](https://github.com/Ben Powell)
- Hardware Supported: The PCBs, controllers supported
- Hardware Availability: Links to where you can find this hardware
Make example for this keyboard (after setting up your build environment):
make classic:defaultFlashing example for this keyboard:
make classic:default:flashSee the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.
Bootloader
Enter the bootloader in 3 ways:
- Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
- Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
- Keycode in layout: Press the key mapped to
QK_BOOTif it is available
Parts
101| Qty | Value | Footprint | References |
|---|---|---|---|
| 66 | Diode | ScottoKeebs_Components:Diode_SOD-123_clean | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +50 |
| 33 | ~ | ScottoKeebs_Choc:SW_choc_v1_HS_1u_Reversible_clean | S1, S2, S10, S11, S12, S13, S14, S15, S16, S17, S18, S19, S20, S21, S22, S23 +17 |
| 1 | RP2040_Zero | ScottoKeebs_MCU:RP2040_Zero | U1 |
| 1 | TRRS | ScottoKeebs_Components:TRRS-lily58 | U2 |
Questions
How big is the Classic PCB?
It measures 130.6 × 87.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Classic use?
101 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Classic KiCad files?
From the SalveVale/classic repository on GitHub, at the commit this page was made from: the board is pcb/classic.kicad_pcb and its schematic pcb/classic.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Classic design in my own project?
Its repository states no licence, so its author keeps all rights: ask SalveVale before reusing the design.
Similar boards
- 2 layers99 × 145.5 mm
- 2 layers230.5 × 60 mm
- 2 layers224.6 × 74.2 mm
- 2 layers90 × 60 mm
Ch32v307gigabit
cnlohr/cnhardware
My dumping grounds for all my kicad projects and random hardware bringup.
101 parts114 - 2 layers450 × 125 mm
A1200KB
aeberbach/A1200KB
As of right now this is revision 4. I know it could be improved very, very slightly by changing the position of key groups by less than a millimetre but I think it's complete now.
101 parts75 - 2 layers100 × 100 mm
LittleSwitchBus
profdc9/ModularTuner
A Modular Antenna Tuner for a Phased Array Antenna System
101 parts59 - 2 layers133.8 × 91.7 mm
Corney island
ceoloide/corney-island
An Ergogen-based, autogenerated version of foostan's crkbd (Corne) split keyboard
101 parts58MIT