
Pi485
bvarner/pi485
An open-source TTL UART <-> RS485 converter, intended for a Raspberry Pi or Arduino

RP2040(Raspberry Pi Pico / Pico 2)をベースにした、多機能なDMX-512コントローラーおよびオシロスコープ・アナライザープロジェクトです。 ハードウェア(KiCad設計データ)とファームウェア(Arduinoスケッチ)が一体となって管理されています。
DVC picov2 is an open-source printed circuit board by saku-C, from the saku-C/DVC_pico repository on GitHub. It is a 2-layer board of 100 × 100 mm with 44 parts on 54 nets, routed with 305 tracks and 178 vias.
It is built around the MAX485ED. Its parts include 12 resistors, 9 capacitors, 6 connectors and 3 ICs. It belongs with the RP2040 boards of this library.
RP2040(Raspberry Pi Pico / Pico 2)をベースにした、多機能なDMX-512コントローラーおよびオシロスコープ・アナライザープロジェクトです。 ハードウェア(KiCad設計データ)とファームウェア(Arduinoスケッチ)が一体となって管理されています。
内部構造 https://qiita.com/kurumi18891/private/b40f511b77fc0b5f25af
操作マニュアル https://qiita.com/kurumi18891/private/ef590465823563e47984
DVC_pico2_1/ (リポジトリルート)
├── DVC_pico2_1.ino # メインファームウェア (Arduinoスケッチ)
├── .gitignore # Git除外設定ファイル
├── README.md # 本ドキュメント
├── antigra_DVCpico/ # 補助フォルダ
└── kicad_DVC_pico/ # ハードウェア設計データ
└── DVC-picov2/ # KiCad v2 回路図・基板アートワーク
├── DVC-picov2.kicad_pcb # 基板レイアウト
├── DVC-picov2.kicad_pro # KiCad プロジェクトファイル
├── DVC-picov2.kicad_sch # 回路図
└── ...CS -> GPIO 22RST -> GPIO 21DC -> GPIO 20LED -> GPIO 17SCK -> GPIO 10MISO -> GPIO 11MOSI -> GPIO 12CS -> GPIO 13TX -> GPIO 0RX -> GPIO 1RE_DE -> GPIO 2SETTING -> GPIO 9UP -> GPIO 8DOWN -> GPIO 4LEFT -> GPIO 6RIGHT -> GPIO 7ENTER -> GPIO 5BACK -> GPIO 3ファームウェアをコンパイルするには、Arduino IDEに以下のライブラリを追加してください:
※ボードマネージャーは「Raspberry Pi Pico/RP2040 (Earle Philhower版)」の使用を想定しています。
| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | R | Resistor_SMD:R_0603_1608Metric | R3, R4, R5, R6, R7, R8, R9, R10, R11, R12 |
| 7 | C | Capacitor_SMD:C_0603_1608Metric | C3, C4, C5, C6, C7, C8, C9 |
| 7 | SW_Push | Connector_Wire:SolderWire-0.15sqmm_1x02_P4mm_D0.5mm_OD1.5mm | BACK, DOWN, ENTER, LEFT, RIGHT, SETTING, UP |
| 3 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H2, H3, H4 |
| 2 | 5.1k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P1.90mm_Vertical | R1, R2 |
| 2 | C | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C1, C2 |
| 2 | Conn_01x03_Pin | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J5, J6 |
| 2 | MAX485E | Package_DIP:DIP-8_W7.62mm | U1, U2 |
| 2 | XLR3_Ground | Connector_Audio:Jack_XLR_Neutrik_NC3FAH2-0_Horizontal | J2, J3 |
| 1 | 1.8_TFT_SPI_128*160 | chi_Library:1.8_TFT_SPI_128_160_footprint | U3 |
| 1 | LOGO | chi_Library:hasupan | G*** |
| 1 | RaspberryPi_Pico | Module:RaspberryPi_Pico_Common_Unspecified | A1 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_G-Switch_GT-USB-7010ASV | J1 |
| 1 | XLR3_Ground | Connector_Audio:Jack_XLR_Neutrik_NC3MAH_Horizontal | J4 |
The 42 most common of 44 parts.

bvarner/pi485
An open-source TTL UART <-> RS485 converter, intended for a Raspberry Pi or Arduino



GrappleRobotics/JMS
Another alternative field management system for the FIRST Robotics Competition.

StefanKrupop/XyloShield
Shield for Arduino that hosts a RFM26W radio module and allows DMX-512 connectivity

SylvainVanIniitu/Piccolo-4C-Black
Piccolo MIDI stochastic sequencer

ChaseDurand/Pool-Pi
Hardware+software solution for controlling a Goldline/Hayward Aqualogic pool control board over WiFi via a Raspberry Pi.

flxkrmr/eec-iv-reader-arduino
Arduino based diagnostics-tool for Fords EEC IV ECUs
It measures 100 × 100 mm and has 2 copper layers, 1.6 mm thick.
44 parts, built around the MAX485ED. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the saku-C/DVC_pico repository on GitHub, at the commit this page was made from: the board is kicad_DVC_pico/DVC-picov2/DVC-picov2.kicad_pcb and its schematic kicad_DVC_pico/DVC-picov2/DVC-picov2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask saku-C before reusing the design.