Skip to the content
2 layers100 × 100 mmDVC picov2, the printed circuit board in 3D

DVC picov2

saku-C/DVC_pico

RP2040(Raspberry Pi Pico / Pico 2)をベースにした、多機能なDMX-512コントローラーおよびオシロスコープ・アナライザープロジェクトです。 ハードウェア(KiCad設計データ)とファームウェア(Arduinoスケッチ)が一体となって管理されています。

Size
100 × 100 mm
Copper layers
2
Thickness
1.6 mm
Parts
44
Nets
54
Pads
219
Tracks, vias
305, 178
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
25 May 2026
Updated
25 May 2026

Overview

DVC picov2 is an open-source printed circuit board by saku-C, from the saku-C/DVC_pico repository on GitHub. It is a 2-layer board of 100 × 100 mm with 44 parts on 54 nets, routed with 305 tracks and 178 vias.

It is built around the MAX485ED. Its parts include 12 resistors, 9 capacitors, 6 connectors and 3 ICs. It belongs with the RP2040 boards of this library.

Main components

1

README

README.md

DVC-PICO v2 Controller & Analyzer

RP2040(Raspberry Pi Pico / Pico 2)をベースにした、多機能なDMX-512コントローラーおよびオシロスコープ・アナライザープロジェクトです。 ハードウェア(KiCad設計データ)とファームウェア(Arduinoスケッチ)が一体となって管理されています。

内部構造 https://qiita.com/kurumi18891/private/b40f511b77fc0b5f25af

操作マニュアル https://qiita.com/kurumi18891/private/ef590465823563e47984


📂 フォルダ構成

text
DVC_pico2_1/ (リポジトリルート)
├── DVC_pico2_1.ino        # メインファームウェア (Arduinoスケッチ)
├── .gitignore             # Git除外設定ファイル
├── README.md              # 本ドキュメント
├── antigra_DVCpico/       # 補助フォルダ
└── kicad_DVC_pico/        # ハードウェア設計データ
    └── DVC-picov2/        # KiCad v2 回路図・基板アートワーク
        ├── DVC-picov2.kicad_pcb # 基板レイアウト
        ├── DVC-picov2.kicad_pro # KiCad プロジェクトファイル
        ├── DVC-picov2.kicad_sch # 回路図
        └── ...

✨ 主な機能

  1. 多彩な通信モード(6チャネル拡張)
    • Monitor Only: 送受信データの監視
    • Read DMX -> SD: 受信したDMXデータをCSV形式でSDカードにリアルタイム録画
    • Write DMX <- SD: SDカードに記録されたCSVファイルを再生し、DMX信号を出力
    • Read DMX -> USB: DMXデータをUSBシリアル経由でPCに送信
    • Write DMX <- USB: USB経由で受信したコマンドに基づいてDMX信号を出力
    • Manual Controller: 7つの操作キーを使用した、手動でのDMXチャンネル出力制御
  2. 5つの画面表示モード
    • Waveform Monitor: DMX各チャネルの値を波形(オシロスコープスタイル)でビジュアル表示
    • Table Monitor: DMX 512チャネルの数値をグリッド状に一覧表示
    • Dashboard: システムの稼働ステータスや通信統計、診断結果をサマリー表示
    • Fixture Inspector: 灯体(フィクスチャ)のチャンネル定義と設定値の確認
    • Multi-Light Monitor: 10灯のインテリジェントライトの個別モニターおよびプロファイル調整
  3. 対話型フィクスチャ(灯体)エディター
    • 接続されたDMX機器のチャンネル数や各チャンネルの役割(Dimmer, Red, Green, Blue, Strobe等)を本体キーで自由に変更・カスタム可能
  4. 永続データ保存(EEPROMエミュレーション)
    • 設定したフィクスチャのプロファイルデータをRP2040の内蔵フラッシュメモリに自動で保存・復元

🛠️ ハードウェア仕様とピン配置

主要コンポーネント

  • MCU: Raspberry Pi Pico / Pico 2 (RP2040 / RP2350)
  • ディスプレイ: 1.8インチ ST7735 TFTカラー液晶 (160x128)
  • 外部ストレージ: MicroSDカードスロット(ソフトウェアSPI動作)
  • DMXインターフェース: MAX485トランシーバー搭載

ピン割り当て (RP2040)

  • TFT ディスプレイ:
    • CS -> GPIO 22
    • RST -> GPIO 21
    • DC -> GPIO 20
    • LED -> GPIO 17
  • SDカード (SoftSPI):
    • SCK -> GPIO 10
    • MISO -> GPIO 11
    • MOSI -> GPIO 12
    • CS -> GPIO 13
  • DMX:
    • TX -> GPIO 0
    • RX -> GPIO 1
    • RE_DE -> GPIO 2
  • 操作ボタン (Active LOW):
    • SETTING -> GPIO 9
    • UP -> GPIO 8
    • DOWN -> GPIO 4
    • LEFT -> GPIO 6
    • RIGHT -> GPIO 7
    • ENTER -> GPIO 5
    • BACK -> GPIO 3

⚙️ 開発環境と依存ライブラリ

ファームウェアをコンパイルするには、Arduino IDEに以下のライブラリを追加してください:

  • Adafruit_GFX (ディスプレイ描画用)
  • Adafruit_ST7735 (ST7735制御用)
  • SdFat (SDカードの高速読み書き用)
  • Pico DMX (DmxInput / DmxOutput) (Earle Philhower版コアのDMX送受信サポート)

※ボードマネージャーは「Raspberry Pi Pico/RP2040 (Earle Philhower版)」の使用を想定しています。

Parts

44
QtyValueFootprintReferences
10RResistor_SMD:R_0603_1608MetricR3, R4, R5, R6, R7, R8, R9, R10, R11, R12
7CCapacitor_SMD:C_0603_1608MetricC3, C4, C5, C6, C7, C8, C9
7SW_PushConnector_Wire:SolderWire-0.15sqmm_1x02_P4mm_D0.5mm_OD1.5mmBACK, DOWN, ENTER, LEFT, RIGHT, SETTING, UP
3MountingHoleMountingHole:MountingHole_3.2mm_M3H2, H3, H4
25.1kResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P1.90mm_VerticalR1, R2
2CCapacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mmC1, C2
2Conn_01x03_PinConnector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_VerticalJ5, J6
2MAX485EPackage_DIP:DIP-8_W7.62mmU1, U2
2XLR3_GroundConnector_Audio:Jack_XLR_Neutrik_NC3FAH2-0_HorizontalJ2, J3
11.8_TFT_SPI_128*160chi_Library:1.8_TFT_SPI_128_160_footprintU3
1LOGOchi_Library:hasupanG***
1RaspberryPi_PicoModule:RaspberryPi_Pico_Common_UnspecifiedA1
1USB_C_Receptacle_USB2.0_16PConnector_USB:USB_C_Receptacle_G-Switch_GT-USB-7010ASVJ1
1XLR3_GroundConnector_Audio:Jack_XLR_Neutrik_NC3MAH_HorizontalJ4

The 42 most common of 44 parts.

Similar boards

  • 2 layers63 × 46 mmPi485, the printed circuit board in 3D

    Pi485

    bvarner/pi485

    An open-source TTL UART <-> RS485 converter, intended for a Raspberry Pi or Arduino

    31 parts41MIT
  • 2 layers150 × 50 mmEsp32-led smps, the printed circuit board in 3D

    Esp32-led smps

    lucysrausch/esp32-led-smps

    230V main LED smps. 2x30W Constant Current.

    179 parts30
  • 4 layers96 × 172 mmServo cpu, the printed circuit board in 3D

    Servo cpu

    wiciu15/servo2

    Servo inverter for 3-phase AC motor with/out encoder feedback

    167 parts29
  • 2 layers60 × 30 mmScoring table hardware, the printed circuit board in 3D

    Scoring table hardware

    GrappleRobotics/JMS

    Another alternative field management system for the FIRST Robotics Competition.

    30 parts18
  • 2 layers68.6 × 53.3 mmXyloShield, the printed circuit board in 3D

    XyloShield

    StefanKrupop/XyloShield

    Shield for Arduino that hosts a RFM26W radio module and allows DMX-512 connectivity

    19 parts17
  • 2 layers65 × 56.5 mmPool pi v1.1, the printed circuit board in 3D

    Pool pi v1.1

    ChaseDurand/Pool-Pi

    Hardware+software solution for controlling a Goldline/Hayward Aqualogic pool control board over WiFi via a Raspberry Pi.

    28 parts14
  • 2 layers53 × 68.7 mmEEC IV Reader, the printed circuit board in 3D

    EEC IV Reader

    flxkrmr/eec-iv-reader-arduino

    Arduino based diagnostics-tool for Fords EEC IV ECUs

    39 parts14GPL-3.0

Questions

How big is the DVC picov2 PCB?

It measures 100 × 100 mm and has 2 copper layers, 1.6 mm thick.

What parts does the DVC picov2 use?

44 parts, built around the MAX485ED. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the DVC picov2 KiCad files?

From the saku-C/DVC_pico repository on GitHub, at the commit this page was made from: the board is kicad_DVC_pico/DVC-picov2/DVC-picov2.kicad_pcb and its schematic kicad_DVC_pico/DVC-picov2/DVC-picov2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the DVC picov2 design in my own project?

Its repository states no licence, so its author keeps all rights: ask saku-C before reusing the design.