

Kestrel
18650 based Dc to DC board for 5v power source for the projects & use as power bank also
- Size
- 90 × 25 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 94
- Nets
- 56
- Pads
- 253
- Tracks, vias
- 551, 78
- Pours
- 22
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 18 Sep 2025
- Updated
- 19 Sep 2025
Overview
Kestrel is an open-source printed circuit board by sakthiasthik, from the sakthiasthik/kestrel repository on GitHub, published under the MIT licence. It is a 2-layer board of 90 × 25 mm with 94 parts on 56 nets, routed with 551 tracks and 78 vias.
It is built around the MT3608, SY6918QDC and TP5100, with the BC817, SI2301 and SS34 among its other parts. Its parts include 36 resistors, 24 capacitors, 5 transistors, 4 diodes and 3 ICs.
Main components
9MT3608
SOT-23-6-40℃~+85℃ 1 1.2MHz 100uA、1.6mA 2A 2V~24V Adjustable Boost Boost Built-in No SOT-23-6 DC-DC Converters ROHS西安航天民芯DC-DC ConvertersSY6918QDC
QFN-16(3x3)1.5mA 2.5A 4.5V~5.35V 5.05V~5.25V 500kHz Boost、Buck Buck-Boost Built-in Yes QFN-16(3x3) DC-DC Converters ROHSSilergy CorpBattery ManagementTP5100
TQFN-16-EP(4x4)-20℃~+85℃ 180uA 1~2 2A 4.2V、8.4V 5V~12V Charging IC Support TQFN-16-EP(4x4) Battery Management ROHSTOPPOWERBattery ManagementBC817
SOT-231 NPN 100nA 150MHz 300mW 40 45V 500mA 5V 700mV NPN SOT-23 Bipolar (BJT) ROHSShikuesBipolar (BJT)SI2301
SOT-23-3L-55℃~+150℃ 1 P-Channel 1.5V 120mΩ@4.5V 2.2A 200pF 20V 700mW 80pF P-Channel ±10V SOT-23 MOSFETs ROHSYONGYUTAIMOSFETsSS34
SMA(DO-214AC)-55℃~+125℃ 3A 40V 500uA@40V 550mV@3A Independent SMA(DO-214AC) Schottky Diodes ROHSMDDSchottky DiodesBAT54C
SOT-231 Pair Common Cathode 200mA 2uA@25V 30V 600mA 800mV@100mA SOT-23 Schottky Diodes ROHSNexperiaSchottky DiodesBC807
SOT-23-65℃~+150℃ 1 PNP 100 100nA 345mW 45V 500mA 5V 700mV 80MHz PNP SOT-23 Bipolar (BJT) ROHSNexperiaBipolar (BJT)SKRKAGE020
SMD,3.9x2.9mm-20℃~+85℃ 1.5mm 1.6N 12V 2.9mm 200,000 Cycles 3.9mm 50mA Round Button SMD(SMT) Tab SPST-NO Surface Mount,Vertical SMD,3.9x2.9mm Tactile Switches ROHSALPSALPINETactile Switches
README
README.mdkestrel
18650 based Dc to DC board for 5v power source for the projects & use as power bank also
Parts
94| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 0R | Resistor_SMD:R_0603_1608Metric | R5, R6, R13, R23, R25, R34, R36 |
| 6 | 100nf | Capacitor_SMD:C_0603_1608Metric | C2, C3, C4, C5, C15, C24 |
| 5 | 100k | Resistor_SMD:R_0603_1608Metric | R26, R27, R31, R32, R33 |
| 5 | 10uf | Capacitor_SMD:C_0805_2012Metric | C1, C6, C7, C16, C17 |
| 4 | 22uf | Capacitor_SMD:C_1206_3216Metric | C18, C19, C21, C22 |
| 4 | 22uf/25V | Capacitor_SMD:C_1206_3216Metric | C8, C9, C10, C11 |
| 3 | 5K1 | Resistor_SMD:R_0603_1608Metric | R3, R4, R9 |
| 3 | Conn_01x02_Pin | Connector_JST:JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | J1, J2, J3 |
| 3 | LOGO | LOGO | G***, G***, G*** |
| 3 | RED_LED | LED_SMD:LED_0805_2012Metric | CHG1, PWR1, PWR2 |
| 3 | R_US | Resistor_SMD:R_0603_1608Metric | R10, R14, R15 |
| 3 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP1, TP2, TP8 |
| 2 | 0R/DNP | Resistor_SMD:R_0603_1608Metric | R2, R12 |
| 2 | 10uf | Capacitor_SMD:C_1206_3216Metric | C12, C13 |
| 2 | 1uf | Capacitor_SMD:C_0603_1608Metric | C14, C23 |
| 2 | 2R2 CSR | Resistor_SMD:R_1206_3216Metric | R30, R35 |
| 2 | BC817 | Package_TO_SOT_SMD:SOT-23 | Q2, Q4 |
| 2 | NA | Resistor_SMD:R_0603_1608Metric | R24, R28 |
| 2 | SI2301 | Package_TO_SOT_SMD:SOT-23 | Q1, Q6 |
| 2 | SS34 | Diode_SMD:D_SMA | D1, D2 |
| 1 | 100mR | Resistor_SMD:R_1206_3216Metric | R11 |
| 1 | 10K | Resistor_SMD:R_0603_1608Metric | R8 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric | R16 |
| 1 | 10nf | Capacitor_SMD:C_0603_1608Metric | C20 |
| 1 | 13k | Resistor_SMD:R_0603_1608Metric | R17 |
| 1 | 1K5 | Resistor_SMD:R_0603_1608Metric | R20 |
| 1 | 1M | Resistor_SMD:R_0805_2012Metric | R29 |
| 1 | 2.2uh | Inductor:L_APV_APH0650_6045 | L3 |
| 1 | 22uH | Inductor:L_APV_APH0650_6045 | L1 |
| 1 | 2K2 | Resistor_SMD:R_0603_1608Metric | R22 |
| 1 | 2K55 | Resistor_SMD:R_0603_1608Metric | R21 |
| 1 | 36k | Resistor_SMD:R_0603_1608Metric | R18 |
| 1 | 4K7 | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 4R7uH | Inductor:L_APV_APH0650_6045 | L2 |
| 1 | 5k1 | Resistor_SMD:R_0603_1608Metric | R19 |
| 1 | BAT54C | Package_TO_SOT_SMD:SOT-23 | D4 |
| 1 | BC807 | Package_TO_SOT_SMD:SOT-23 | Q3 |
| 1 | BLUE_LED | LED_SMD:LED_0805_2012Metric | STB1 |
| 1 | Battery_Cell | BatteryHolder:BatteryHolder_Keystone_1042_1x18650 | BT1 |
| 1 | Jumper_3_Bridged12 | JUMPER_SMD:J_0402_1005Metric | JP1 |
| 1 | M7 | Diode_SMD:D_SMA | D3 |
| 1 | MT3608 | Package_TO_SOT_SMD:SOT-23-6 | U2 |
| 1 | R_US/DNP | Resistor_SMD:R_0603_1608Metric | R7 |
| 1 | SKRKAGE020 | Button:SW_Push_SPST_NO_Alps_SKRK | SW2 |
| 1 | SW_SPDT | Switch:MSK-12C02 | SW1 |
| 1 | SY6918 | Silergy:SY6918A_QFN-16_3x3mm | U3 |
| 1 | TP5100 | Toppwr:QFN65P400X400X90-17N | U1 |
| 1 | USB4105 - Type C USB 2.0 Connector | USB:USB_C_Receptacle_Palconn_UTC16-G | IN_USB1 |
| 1 | USB_A | USB:USB_A_Type Female PCB R_A SMD | OUT_USB1 |
Similar boards
- 4 layers68.5 × 85.6 mm

- 2 layers118 × 67 mm
/coloryr.kicad_pcb.jpg?size=s&soon)
Coloryr
Coloryr/ColorAudio
通用耳放,目前支持: - 音乐播放 - MP3音频解码,信息显示 - FLAC音频解码,信息显示 - 蓝牙音频播放 - SBC编码 - AAC编码 - aptx编码(freeaptx解码库) - USB音频播放 - UAC1 (最大96K 32bit,只能设置一种采样大小) - UAV2 (最大192K 32bit,支持多种采样大小)
195 parts2GPL-3.0 - 2 layers50 × 145 mm

SmartRemote
Circuit-Digest/Smart-Universal-Remote-with-Learning-function-and-Google-Assistant-Support
Smart Universal Remote with Learning function and Google Assistant Support
75 parts3 - 4 layers102.7 × 77.6 mm

Espcam
mazyacin/espcam-breakout-board
high end espcam breackout board for IOT and monetering
64 partsMIT - 2 layers83.7 × 53.7 mm

- 4 layers56 × 114 mm

STM32 x RFM96 v2
collins-emasi/KiCAD-PROJECTS-PCB
In this repository, I will be sharing some of the project I'm working on with KiCAD software.
103 parts1 - 4 layers252 × 152 mm

CTA control board
PySpice-org/eda-rw
Python library to read/write KiCad and LibrePCB Sexpr file format
619 parts9 - 2 layers302.9 × 134.3 mm

Questions
How big is the Kestrel PCB?
It measures 90 × 25 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Kestrel use?
94 parts, built around the MT3608, SY6918QDC, TP5100 and BC817. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Kestrel KiCad files?
From the sakthiasthik/kestrel repository on GitHub, at the commit this page was made from: the board is Kestrel/kestrel.kicad_pcb and its schematic Kestrel/Dual_Chip.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Kestrel design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).