Skip to the content
4 layers24.6 × 14.7 mmMEMSpcb, the printed circuit board in 3D

NASA Geological Field Assistant - 2025 Computer Engineering Capstone

Size
24.6 × 14.7 mm
Copper layers
4
Thickness
1.6 mm
Parts
4
Nets
7
Pads
22
Tracks, vias
52, 2
Pours
1
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
7 Nov 2025
Updated
4 Jun 2026

Overview

MEMSpcb is an open-source printed circuit board by sage-fieldassistant, from the sage-fieldassistant/NASA-Geological-Field-Assistant repository on GitHub. It is a 4-layer board of 24.6 × 14.7 mm with 4 parts on 7 nets, routed with 52 tracks and 2 vias.

It is built around the MMICT5848-00-012. Its parts include 1 capacitor, 1 resistor and 1 connector.

Main components

1

README

README.md

Surface Assistant for Geological Evaluation

A field system for real-time lunar rock classification. Runs on a NVIDIA Jetson Orin NX with a microphone, camera, and LED display. A ground UI on a separate machine lets Earth-based mission control review collected data.

system overview

Camera captures an image of a rock, RockNet classifies it, and the volume estimator measures its dimensions. All information is shown on LED display in real time. Meanwhile the MEMS mic streams to the voice transcriber, which appends timestamped field notes.

Everything gets written to sage_store/ on the Jetson. After a session, scripts/transfer_to_ground.ps1 pulls that folder to the ground machine, where ground-UI lets mission control browse the full mission log.

where data lives

DataFile(s)Notes
Captured imagesML-classifications/camera-pipeline/images/YYYYMMDD/*.jpgone folder per day
Rock classification*_prediction.json + sage_store/rocks.jsonlprediction.json stays with image; jsonl is the running log
Volume + mass*_volume.jsonmerged into the rock's entry in rocks.jsonl
Voice notessage_store/voice_notes.jsonltimestamped transcripts, keyed to rock sample
Mission indexsage_store/missions.jsongroups rocks into named missions

quick start

bash
make setup      # install dependencies + download models
make check      # verify setup
make run        # production mode (full pipeline)
make run-mock   # mock data (no hardware needed)
make run-mock-ml  # real voice transcription, mock ML

display controls

KeyAction
Joystick / arrow keysnavigate rocks
ESCexit fullscreen
CTRL+Cquit
Quit buttonquit

folders

FolderWhat it does
ML-classifications/rock classifier
led-display/PySide6 UI
voiceNotes/live speech-to-text for field annotations
rock-volume/volume + mass calculations
ground-UI/browser-based mission review application
pcb/MEMS microphone breakout board (KiCad)
microphone-testing/audio test samples
scripts/data transfer utilities

Parts

4
QtyValueFootprintReferences
1100 nFCapacitor_Tantalum_SMD:CP_EIA-3528-12_Kemet-T_Pad1.50x2.35mm_HandSolderC1
1100kResistor_SMD:R_0603_1608MetricR1
1Conn_02x04_Odd_EvenConnector_PinHeader_2.00mm:PinHeader_2x04_P2.00mm_VerticalJ2
1MMICT5848-00-012t5848:MIC_MMICT5848-00-012MK1

More from sage-fieldassistant/NASA-Geological-Field-Assistant

1
  • 4 layers24.6 × 14.7 mmMEMSpcb, the printed circuit board in 3D

    MEMSpcb

    sage-fieldassistant/NASA-Geological-Field-Assistant

    NASA Geological Field Assistant - 2025 Computer Engineering Capstone

    4 parts4

Similar boards

  • 2 layers48 × 29 mmNoiStop, the printed circuit board in 3D

    NoiStop

    pareror/UnNomeCheTiIspira

    HackTurin 2026

    14 parts2
  • 4 layers47.1 × 45.3 mmMixed signal Board Rev D, the printed circuit board in 3D

    Mixed signal Board Rev D

    Akhilesh-design-02/STM32F407-Hardware-Design

    4-layer STM32F407 mixed-signal PCB design featuring I2C/I2S/USB interfaces, SGP40 & SHT40 sensors, power plane splits, and star grounding for noise isolation.

    92 parts
  • 4 layers62 × 60 mmPairing ESP32 C3FH4 V29 OPTIMIZED, the printed circuit board in 3D

    Pairing ESP32 C3FH4 V29 OPTIMIZED

    windmoondreamer/pairing-voice-cube

    아이가 목소리를 녹음하고, 부모가 버튼을 눌러 재생하는 장치의 회로기판 프로젝트. 80mm 큐브 케이스 · 최대 45초 녹음 · 내장 플래시 · 배터리 구동.

    78 parts
  • 6 layers50 × 80 mmHet68-sat, the printed circuit board in 3D

    Het68-sat

    fedurca/het68_pcb

    pcb design description

    52 parts
  • 2 layers20 × 14 mmMicroduck Audio MIC R3, the printed circuit board in 3D

    Microduck Audio MIC R3

    ldcyes/OpenDuck

    已完成可编辑原理图、真实四层 PCB 和本地库。阶梯板面积 4510 mm²,比原 65×60 + 32×30 mm 两板总面积 4860 mm² 少 350 mm²(7.20%)。原 TDK 模块本体、四个安装孔和原 TDK 器件位置保留,回生电容采用原料号卧装,J1 因实际拔插通道冲突改为同系列 BM08 顶插。当前为工程候选,未制造,未完成热、回生瞬态、低电量或行走验收。

    12 parts
  • 4 layers33.7 × 12.4 mmDisplay eval short, the printed circuit board in 3D

    Display eval short

    byrantech/laptop

    anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

    4 parts4.3kMIT
  • 4 layers78 × 40 mmAdd on template, the printed circuit board in 3D

    Add on template

    dotstartech/wall-panel

    Wall mounted 4 inch touch display panel with CM4 inside

    4 parts445
  • 4 layers48.5 × 16.3 mmCoupler test, the printed circuit board in 3D

    Coupler test

    loxodes/vna

    Under development open hardware microwave vector network analyzer

    4 parts205

Questions

How big is the MEMSpcb PCB?

It measures 24.6 × 14.7 mm and has 4 copper layers, 1.6 mm thick.

What parts does the MEMSpcb use?

4 parts, built around the MMICT5848-00-012. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the MEMSpcb KiCad files?

From the sage-fieldassistant/NASA-Geological-Field-Assistant repository on GitHub, at the commit this page was made from: the board is pcb/MEMSpcb.kicad_pcb and its schematic pcb/MEMSpcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the MEMSpcb design in my own project?

Its repository states no licence, so its author keeps all rights: ask sage-fieldassistant before reusing the design.