2 layers40 × 30 mm
2 layers
LED Display
sagarHackeD/LED_Display- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 3
- Nets
- 7
- Pads
- 10
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 12 Jun 2024
- Updated
- 5 Dec 2025
Overview
LED Display is an open-source printed circuit board by sagarHackeD, from the sagarHackeD/LED_Display repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board with 3 parts on 7 nets.
Its parts include 1 resistor and 1 connector. It belongs with the lEDs and displays boards of this library.
README
README.mdLED_Display
Parts
3| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 4.2V | Battery:BatteryHolder_Keystone_1042_1x18650 | BT1 |
| 1 | A9013 | OptoDevice:R_LDR_5.0x4.1mm_P3mm_Vertical | R1 |
| 1 | Conn_01x03_Pin | Connector_TE-Connectivity:TE_826576-3_1x03_P3.96mm_Vertical | J1 |
Similar boards
- 2 layers51.9 × 16 mm
Passive2-rpi non standard adapter
hzeller/rpi-rgb-led-matrix
Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO
3 parts4.4kGPL-2.0 - 2 layers16.3 × 16.3 mm
- 2 layers
Sub
atopile/atopile
Design circuit boards with code! ✨ Get software-like design reuse 🚀, validation, version control and collaboration in hardware; starting with electronics ⚡️
3 parts4kMIT - 2 layers85 × 30 mm
- 2 layers124.5 × 33.7 mm
- 2 layers10.5 × 83 mm
- 2 layers21.2 × 51.3 mm
Pico reset
hackclub/sprig
🍃 Learn to code by making games in a JavaScript web-based game editor.
3 parts1.1kMIT
Questions
What parts does the LED Display use?
3 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the LED Display KiCad files?
From the sagarHackeD/LED_Display repository on GitHub, at the commit this page was made from: the board is Hardware/LED_Display.kicad_pcb and its schematic Hardware/LED_Display.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the LED Display design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).