Thumb left
s-katada/kobu
Nix flake / direnv。ルートの flake.nix が toolchain バージョンの単一情報源で、CI も同じ devshell で走ります。使い方は v1/README.md を参照。

Nix flake / direnv。ルートの flake.nix が toolchain バージョンの単一情報源で、CI も同じ devshell で走ります。使い方は v1/README.md を参照。
Left main is an open-source printed circuit board by s-katada, from the s-katada/kobu repository on GitHub. It is a 2-layer board of 85 × 83 mm with 33 parts on 26 nets, routed with 192 tracks and 29 vias.
Its parts include 16 diodes, 16 switches and 1 connector.
自作分割キーボード「kobu」のモノレポです。世代ごとにディレクトリを分けています。
| ディレクトリ | 中身 |
|---|---|
v1/ | 初代 kobu — KiCad PCB / ケース / ファームウェア (RMK・ZMK) / Web キーマップエディタ。詳細は v1/README.md |
v2/ | kobu v2 — ケース / RMK ファームウェア。小指キーを左右 1 個ずつ追加した第 2 世代 (kobu2, PID 0x425A)。詳細は v2/README.md |
Nix flake / direnv。ルートの flake.nix が toolchain バージョンの単一情報源で、CI も同じ devshell で走ります。使い方は v1/README.md を参照。
| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | D | Diode_SMD:D_SOD-123 | D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12, D13, D14, D15, D16 |
| 16 | SW_Push | PCM_Switch_Keyboard_Hotswap_Kailh:SW_Hotswap_Kailh_Choc_V2_1.00u | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8, SW9, SW10, SW11, SW12, SW13, SW14, SW15, SW16 |
| 1 | Conn_01x10 | Connector_FFC-FPC:Hirose_FH12-10S-0.5SH_1x10-1MP_P0.50mm_Horizontal | J1 |
s-katada/kobu
Nix flake / direnv。ルートの flake.nix が toolchain バージョンの単一情報源で、CI も同じ devshell で走ります。使い方は v1/README.md を参照。

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

Arrow-air/project-quiver
Project Quiver documentation, designs, and project artifacts.

ozel/DIY_particle_detector
A mobile low-cost spectrometer for measuring radioactivity and the energy of ionising radiation like alpha particles and electrons
BlueAndi/Pixelix
Full RGB LED matrix, based on an ESP32 and WS2812B LEDs or emulated LEDs on TFT.

jrsteensen/OpenHornet
OpenHornet 1:1 F/A-18C Simulator Repository

It measures 85 × 83 mm and has 2 copper layers, 1.6 mm thick.
33 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the s-katada/kobu repository on GitHub, at the commit this page was made from: the board is v2/pcb/left-main/left-main.kicad_pcb and its schematic v1/pcb/main-unit-left/main-unit-left.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask s-katada before reusing the design.