
Atmega328 minimal V20
rzuehlsd/Minimal-Atmega8-board
Minimal Arduino compatible ATmega8 development board

Minimal Arduino compatible ATmega8 development board
Minimal Programmer v01 is an open-source printed circuit board by rzuehlsd, from the rzuehlsd/Minimal-Atmega8-board repository on GitHub. It is a 2-layer board of 67.5 × 68 mm with 21 parts on 55 nets, routed with 144 tracks and 12 vias.
Its parts include 6 resistors, 4 capacitors, 4 diodes, 4 connectors and 1 IC. It belongs with the microcontroller boards and interfaces and adapters boards and the AVR (ATmega, ATtiny) boards of this library.
This is a minimal Arduino-compatible development board designed for the ATmega8/ATmega328 microcontroller family. The V2.0 variant features an extended 26-pin board adapter while maintaining identical functionality to the original design.
All microcontroller signals are available on the extended connector:
This minimal system is ideal for:
This minimal system provides all essential features for ATmega328-based development while maintaining a compact and cost-effective design.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 330 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2, R3, R4, R5 |
| 2 | 0.1u | Capacitor_THT:C_Rect_L7.0mm_W3.5mm_P5.00mm | C3, C4 |
| 2 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R6 |
| 2 | 22p | Capacitor_THT:C_Disc_D3.8mm_W2.6mm_P2.50mm | C1, C2 |
| 1 | 16MHz | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | Y1 |
| 1 | ATmega8 kompatible | Package_DIP:DIP-28_W15.24mm | U2 |
| 1 | Clock Select | Connector_PinSocket_2.54mm:PinSocket_2x03_P2.54mm_Vertical | J3 |
| 1 | FTDI | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J2 |
| 1 | ISP Header | Connector_PinSocket_2.54mm:PinSocket_2x05_P2.54mm_Vertical | J1 |
| 1 | Interface to Minimal ATmega328 (ISP Programmer) | Connector_PinHeader_2.54mm:PinHeader_2x13_P2.54mm_Vertical | J4 |
| 1 | LED Blink | LED_THT:LED_D3.0mm | D1 |
| 1 | LED Error | LED_THT:LED_D3.0mm | D3 |
| 1 | LED Prog | LED_THT:LED_D3.0mm | D2 |
| 1 | LED Run | LED_THT:LED_D3.0mm | D4 |
| 1 | Reset | Button_Switch_THT:SW_PUSH_6mm | SW1 |

rzuehlsd/Minimal-Atmega8-board
Minimal Arduino compatible ATmega8 development board

gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software

mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog


hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

drandyhaas/KiCadRoutingTools
A set of Python/Rust tools to aid routing in KiCad

Arrow-air/project-quiver
Project Quiver documentation, designs, and project artifacts.


It measures 67.5 × 68 mm and has 2 copper layers, 1.6 mm thick.
21 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the rzuehlsd/Minimal-Atmega8-board repository on GitHub, at the commit this page was made from: the board is Example/Minimal_Programmer_v01.kicad_pcb and its schematic Atmega328 minimal V2.0/Atmega328 minimal V20.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask rzuehlsd before reusing the design.