Skip to the content
2 layers116.1 × 97.8 mmNostrum Diodeless, the printed circuit board in 3D

Nostrum Diodeless

rzssh/nostrum-promicro

Nostrum Chunky ProMicro remix

Size
116.1 × 97.8 mm
Copper layers
2
Thickness
1.6 mm
Parts
22
Nets
25
Pads
510
Tracks, vias
484, 78
Pours
1
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
2 Jun 2026
Updated
2 Jun 2026

Overview

Nostrum Diodeless is an open-source printed circuit board by rzssh, from the rzssh/nostrum-promicro repository on GitHub. It is a 2-layer board of 116.1 × 97.8 mm with 22 parts on 25 nets, routed with 484 tracks and 78 vias.

Its parts include 16 switches and 1 IC. It belongs with the AVR (ATmega, ATtiny) boards of this library.

README

README.md

nostrum-promicro

A wireless ProMicro-based remix of bennytrouser's Nostrum Chunky, a 32-key MX-spaced split. Same layout, reworked around a widely available ProMicro-pinout board.

Nostrum Splayed PCB

What's different

  • ProMicro MCU instead of the Seeed Xiao BLE.

  • Direct wiring, no diodes — the extra ProMicro pins are enough to wire the matrix without them.

  • Bluetooth only — no TRRS jack footprint. Might add later.

  • Reversible PCB — cheaper to fab.

  • Splayed version included — see Nostrum Splayed v2/ alongside the standard Nostrum Diodeless/ board.

The original Nostrum Chunky case will not fit these boards (at least the splayed one). The old design is kept under Case/ for reference only until tested.

BOM

PartQty
PCB2
nRF52840 Pro Micro2
LiPo battery2
Power switch2
Reset button2
Hotswap sockets32
Switches (MX / Choc v1 / Choc v2)32
Keycaps32

Building one

Fab the board of your choice (Nostrum Diodeless or Nostrum Splayed v2) using its gerber zip. Solder the hotswap sockets, power switch, reset button, and battery onto each half, then socket the MCU. Snap in switches and keycaps and flash ZMK. No case yet — you're on your own there for now.

Credits

Original Nostrum Chunky by bennytrouser. This is mostly just a ProMicro remix.

Parts

22
QtyValueFootprintReferences
16SW_Pushrznkbd-switches:SW_MX_Choc_1u_Hotswap_ReversibleSW2, SW3, SW4, SW5, SW6, SW8, SW9, SW10, SW11, SW12, SW14, SW15, SW16, SW17, SW18, SW20
2MountingHole_Padrznkbd-connectors:CON_1pin_PadBat+1, BatGND1
1G***kibuzzard-67FBD43Fkibuzzard-67FBD43F
1ProMicro-kbdrznkbd-mcu:MCU_ProMicro_Reversible_JumpersU1
1SW_Pushrznkbd-misc:SW_Reset_TactileRSW1
1SW_SPDTrznkbd-misc:SW_Power_SPDTSW_POWER1

More from rzssh/nostrum-promicro

1
  • 2 layers122.1 × 97.8 mmNostrum Splayed, the printed circuit board in 3D

    Nostrum Splayed

    rzssh/nostrum-promicro

    Nostrum Chunky ProMicro remix

    22 parts

Similar boards

  • 2 layers158 × 11 mmDaylight Matchstick, the printed circuit board in 3D

    Daylight Matchstick

    VoronDesign/Voron-Hardware

    Cool Hardware designed by the Voron Design group

    22 parts1.1kGPL-3.0
  • 2 layers57 × 65 mmRgb to hdmi, the printed circuit board in 3D

    Rgb to hdmi

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    22 parts1kGPL-3.0
  • 2 layers81 × 57.2 mmRP2040-Macropad, the printed circuit board in 3D

    RP2040-Macropad

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    22 parts915
  • 2 layers54.6 × 70.9 mmBeagleLogic Cape, the printed circuit board in 3D

    BeagleLogic Cape

    abhishek-kakkar/BeagleLogic

    A Software Suite that implements a logic analyzer with the PRU on the BeagleBone / BeagleBone Black.

    22 parts479GPL-3.0
  • 2 layers66.4 × 24.5 mmConnecting piece, the printed circuit board in 3D

    Connecting piece

    Chrismettal/flipper-zero-backpacks

    Backpack-style addon boards for the Flipper Zero!

    22 parts456
  • 2 layers51 × 70 mmDMG A04-01, the printed circuit board in 3D

    DMG A04-01

    HDR/NintendoPCBs

    Replacement pcb's for Nintendo games.

    22 parts321
  • 2 layers27.8 × 16 mmSpi 1v8 level shifter, the printed circuit board in 3D

    Spi 1v8 level shifter

    CRImier/MyKiCad

    My KiCad boards. Can't be bothered uploading individually anymore, so here you go.

    22 parts253GPL-3.0

Questions

How big is the Nostrum Diodeless PCB?

It measures 116.1 × 97.8 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Nostrum Diodeless use?

22 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Nostrum Diodeless KiCad files?

From the rzssh/nostrum-promicro repository on GitHub, at the commit this page was made from: the board is Nostrum Diodeless/Nostrum Diodeless.kicad_pcb and its schematic Nostrum Diodeless/Nostrum Diodeless.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Nostrum Diodeless design in my own project?

Its repository states no licence, so its author keeps all rights: ask rzssh before reusing the design.