
LED Breakout v1
rvodden/led_breakout
A small breakout board to augment the ice40 UP5K breakout board

A small breakout board to augment the ice40 UP5K breakout board
LED Breakout (through hole) is an open-source printed circuit board by rvodden, from the rvodden/led_breakout repository on GitHub. It is a 2-layer board of 70 × 37.3 mm with 41 parts on 50 nets, routed with 124 tracks and 0 vias.
Its parts include 16 resistors, 9 connectors, 8 diodes and 8 transistors. It belongs with the interfaces and adapters boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | R | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1, R2, R3, R4, R5, R6, R7, R8, R9, R10, R11, R12, R13, R14, R15, R16 |
| 8 | 2N3904 | Package_TO_SOT_THT:TO-92_Inline | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8 |
| 8 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1, J2, J3, J4, J5, J6, J7, J8 |
| 8 | LED | LED_THT:LED_D5.0mm | D1, D2, D3, D4, D5, D6, D7, D8 |
| 1 | Conn_02x10_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x10_P2.54mm_Vertical | J9 |

rvodden/led_breakout
A small breakout board to augment the ice40 UP5K breakout board

rvodden/led_breakout
A small breakout board to augment the ice40 UP5K breakout board


VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

openwch/ch32v003
CH32V003 is an ultra-cheap RISC-V MCU with 2KB SRAM, 16KB flash, and up to 18 GPIOs that sells for under $0.10

imchipwood/dumbpad
Simple 4x4 numpad with rotary encoder. Powered by QMK via ATmega32u4 Pro Micro

jrsteensen/OpenHornet
OpenHornet 1:1 F/A-18C Simulator Repository


fabiansteiner/OpenValve
3D-printable pinch valve for irrigation and sensor-driven liquid control.
It measures 70 × 37.3 mm and has 2 copper layers, 1.6 mm thick.
41 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the rvodden/led_breakout repository on GitHub, at the commit this page was made from: the board is LED Breakout (through hole).kicad_pcb and its schematic LED Breakout.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask rvodden before reusing the design.