

Quest EMG-1
Repo for Quest project at the Hogeschool Utrecht
- Size
- 55 × 60 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 70
- Nets
- 76
- Pads
- 211
- Tracks, vias
- 394, 142
- Pours
- 67
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 14 Feb 2023
- Updated
- 8 Jan 2024
Overview
Quest EMG-1 is an open-source printed circuit board by ruubruben, from the ruubruben/EMG_Feedback_Tool repository on GitHub, published under the MIT licence. It is a 2-layer board of 55 × 60 mm with 70 parts on 76 nets, routed with 394 tracks and 142 vias.
It is built around the TP1542A-SR, INA121UAE4 and L7805. Its parts include 31 resistors, 14 capacitors, 6 ICs, 5 connectors and 2 diodes.
Main components
3TP1542A-SR
SOIC-8-40℃~+125℃ 0.001pA 100mA 10pA 1uV/℃ 2 2.1V~6V 27nV/√Hz@1kHz 400uV 700V/ms 80uA 95dB Enable/shutdown function Rail-to-Rail Input, Rail-to-Rail Output SOIC-8 Operational Amplifier ROHS3PEAKLow Power OpAmpsINA121UAE4
SOIC-8-55℃~+125℃ 0.7% 0.7V/us 1 300uV 4pA External resistor gain、Overvoltage protection SOIC-8 Instrumentation Amplifiers ROHSTexas InstrumentsInstrumentation AmplifiersL7805
TO-220ST0℃~+125℃@(Tj) 1 1.2A 20V 2V@(1A) 42uV 500uA 5V 73dB@(120Hz) Fixed Positive Short Circuit Protection TO-220ST Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSOSENVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
README.mdEMG Feedback tool
This Repo is for the Quest project at the HU university of applied siences
In this project the goals is to make a tool that uses EMG Measurments to give feedback to the user. This is done so the user learns to relax the muscles more.
Parts
70| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 100n | Capacitor_SMD:C_0603_1608Metric | C1, C2, C3, C4, C8, C10 |
| 4 | 100 | Resistor_SMD:R_0402_1005Metric | R1, R4, R5, R8 |
| 4 | 10n | Capacitor_SMD:C_0402_1005Metric | C5, C6, C13, C14 |
| 4 | 15K | Resistor_SMD:R_0402_1005Metric | R7, R18, R23, R25 |
| 4 | 15k | Resistor_SMD:R_0402_1005Metric | R13, R14, R27, R29 |
| 4 | 1K | Resistor_SMD:R_0402_1005Metric | R2, R6, R20, R22 |
| 4 | 68k | Resistor_SMD:R_0402_1005Metric | R12, R16, R17, R24 |
| 4 | Battery_Cell | Connector_PinHeader_1.00mm:PinHeader_1x02_P1.00mm_Horizontal | BT1, BT2, BT3, BT4 |
| 4 | TestPoint | TestPoint:TestPoint_Pad_1.0x1.0mm | TP1, TP2, TP3, TP4 |
| 3 | 10K | Resistor_SMD:R_0402_1005Metric | R3, R9, R21 |
| 3 | Fiducial | Fiducial:Fiducial_0.5mm_Mask1.5mm | FID1, FID2, FID3 |
| 3 | TP1542A-SR | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U5, U6, U7 |
| 2 | 150K | Resistor_SMD:R_0402_1005Metric | R28, R31 |
| 2 | 1n | Capacitor_SMD:C_0603_1608Metric | C7, C9 |
| 2 | 33k | Resistor_SMD:R_0402_1005Metric | R19, R30 |
| 2 | 56k | Resistor_SMD:R_0402_1005Metric | R15, R26 |
| 2 | AudioJack3 | Connector_Audio:Jack_3.5mm_CUI_SJ-3523-SMT_Horizontal | J3, J4 |
| 2 | Conn_01x19_Socket | Connector_PinSocket_2.54mm:PinSocket_1x19_P2.54mm_Vertical | J1, J2 |
| 2 | D_Schottky | Diode_SMD:D_SOD-323 | D1, D2 |
| 2 | INA121UAE4 | footprints:INA121UAE4 | U2, U3 |
| 1 | 100nF | Capacitor_SMD:C_0603_1608Metric | C16 |
| 1 | 10uF | Capacitor_SMD:C_0402_1005Metric | C15 |
| 1 | 390K | Resistor_SMD:R_0402_1005Metric | R10 |
| 1 | 390k | Resistor_SMD:R_0402_1005Metric | R11 |
| 1 | Conn_01x10_Pin | Connector_PinHeader_1.00mm:PinHeader_1x10_P1.00mm_Vertical | J5 |
| 1 | L7805 | Package_TO_SOT_THT:TO-220F-3_Horizontal_TabDown | U4 |
| 1 | LOGO | LOGO | G*** |
More from ruubruben/EMG_Feedback_Tool
1- 2 layers55 × 60 mm

Similar boards
- 2 layers40.6 × 110 mm

Europi surface mount
Allen-Synthesis/EuroPi
EuroPi: A reprogrammable Eurorack module based on the Raspberry Pi Pico
92 parts584CC0-1.0 - 2 layers132.1 × 45.7 mm

IPoS
peterheinrich/InternetOverSpaghetti
Transmitting IP packages over a pair of spaghetti thus demonstrating how media independent IP really is.
42 parts342 - 2 layers59.7 × 57.5 mm

- 2 layers90.8 × 35.6 mm

ERCF easy brd
Tircown/ERCF-easy-brd
More informations on how to reset for flashing:\ https://wiki.seeedstudio.com/Seeeduino-XIAO/#enter-bootloader-mode
28 parts195GPL-3.0 - 2 layers111.3 × 106.4 mm

Super Sixteen v1
matthewcieplak/super-sixteen
Code and schematics for the Super Sixteen Eurorack sequencer
141 parts171 - 2 layers91.4 × 71.1 mm

Pico w rover
NikodemBartnik/Mini-Mars-Rover
Educational robotic platform made to look like a mini mars rover
20 parts143MIT - 2 layers144.1 × 182.2 mm

SHVC CPU-01
starlightk7/OpenSFC
OSHW Reproduction Parts related to the Super Famicom / Super Nintendo game console
498 parts114CERN-OHL-S-2.0 - 2 layers106.1 × 155 mm

Motherboard
Redherring32/OpenTendo-TopLoader
An Open Source HardWare (OSHW) recreation of the 1993 toploading NES motherboard (Also known as NES-101)
84 parts94
Questions
How big is the Quest EMG-1 PCB?
It measures 55 × 60 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Quest EMG-1 use?
70 parts, built around the TP1542A-SR, INA121UAE4 and L7805. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Quest EMG-1 KiCad files?
From the ruubruben/EMG_Feedback_Tool repository on GitHub, at the commit this page was made from: the board is Quest_EMG/Quest_EMG-1.kicad_pcb and its schematic PCB 2/Connn.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Quest EMG-1 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).