rusty-dev0/KineticBoard-HATextension board designed to provide dual-motor control to the Raspberry Pi Pico series microcontrollers
KineticBoardLeaf2 is an open-source printed circuit board by rusty-dev0, from the rusty-dev0/KineticBoard-HAT repository on GitHub. It is a 2-layer board with 54 parts on 74 nets.
It is built around the MSMP2307DN-LF-Z, 2MS1T1B1M2QES-5 and DC-470-2.1GP, with the SS54 and TYPE-C-31-M-12 among its other parts. Its parts include 20 capacitors, 15 resistors, 3 ICs, 3 connectors and 2 inductors.
"# KineticBoard-HAT"
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 0.1uF | Capacitor_SMD:C_0805_2012Metric | C4, C11, C13, C14, C15, C18 |
| 5 | 0805 | lcsc_footprints:C2297_LED0805-R-RD | BLUE1, GREEN1, ORANGE1, RED1, WHITE1 |
| 5 | 10uF | Capacitor_SMD:C_0805_2012Metric | C1, C2, C7, C8, C19 |
| 3 | 100uF | lcsc_footprints:C72478_CAP-SMD_BD6_3-L6_6-W6_6-LS7_6-FD | C16, C17, C20 |
| 3 | 300R | Resistor_SMD:R_0805_2012Metric | R10, R11, R15 |
| 2 | 1.5K | Resistor_SMD:R_0805_2012Metric | R4, R8 |
| 2 | 100K | Resistor_SMD:R_0805_2012Metric | R2, R6 |
| 2 | 10nF | Capacitor_SMD:C_0805_2012Metric | C3, C9 |
| 2 | 10uH | lcsc_footprints:C5189958_IND-SMD_L7_2-W6_6_GPSR07X0 | L1, L2 |
| 2 | 22uF | Capacitor_SMD:C_0805_2012Metric | C5, C10 |
| 2 | 3.9nF | Capacitor_SMD:C_0805_2012Metric | C6, C12 |
| 2 | 5.1K | Resistor_SMD:R_0805_2012Metric | R12, R13 |
| 2 | 6-pin JST | lcsc_footprints:C131342_CONN-TH_B6B-PH-K-S | M1, M2 |
| 2 | 6.8K | Resistor_SMD:R_0805_2012Metric | R7, R9 |
| 2 | MSMP2307DN-LF-Z | lcsc_footprints:C49375228_ESOP-8_L4_9-W3_9-P1_27-LS6_0-BL-EP | U1, U2 |
| 2 | Socket | Connector_PinSocket_2.54mm:PinSocket_1x20_P2.54mm_Vertical | J1, J2 |
| 1 | 1.2K | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | 2MS1T1B1M2QES-5 | lcsc_footprints:C908280_SW-TH_2MS1T1B1M2QES-5 | SW2 |
| 1 | 3.9K | Resistor_SMD:R_0805_2012Metric | R3 |
| 1 | 4.7K | Resistor_SMD:R_0805_2012Metric | R5 |
| 1 | 510R | Resistor_SMD:R_0805_2012Metric | R14 |
| 1 | Comm | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | DC-470-2.1GP | lcsc_footprints:C194407_DC-IN-TH_DC-470-2_1GP | DC1 |
| 1 | SS54 | lcsc_footprints:C22452_SMA_L4_4-W2_8-LS5_4-R-RD | D1 |
| 1 | TB6612FNG | Package_SO:SSOP-24_5.3x8.2mm_P0.65mm | U3 |
| 1 | TYPE-C-31-M-12 | lcsc_footprints:C165948_USB-C_SMD-TYPE-C-31-M-12_1 | USBC1 |
54 parts, built around the MSMP2307DN-LF-Z, 2MS1T1B1M2QES-5, DC-470-2.1GP and SS54. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the rusty-dev0/KineticBoard-HAT repository on GitHub, at the commit this page was made from: the board is KineticBoardLeaf2.kicad_pcb and its schematic KineticBoardLeaf2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask rusty-dev0 before reusing the design.
paulmartinezcuenta/Proyecto_finales_mecatronica_ITLA
Monorepo for two mechatronics projects sharing a panelized PCB: HydroScan (autonomous IoT maritime buoy with LTE, GPS, and solar power) and AUTOAMBU (automated medical respirator prototype with DC control and USB fast…
cyberknet/water-sensor-cutoff
Water sensor and cutoff for HomeAssistant using an ESP32 DevKitC board
Takazudo/zudo-osc-hole-field
This directory retains the rejected #38 nine-board-era schematic, PCB and route receipts at base commit 1fc6e5347308fe5e8166d5828ba3ba6fa8e101c7. It is excluded from the current ten-board manifest.
jlcjak/astra_piNas
Six-layer CM5 Lite dual-NVMe carrier with PCIe switch, Ethernet, microSD, USB-C PD and PoE. Review design; fabrication hold documented.
ut-ras/chessbot
Python/MQTT software, Raspberry Pi Config files, PCB Schematics for an autonomous chess playing robot
ademuri/air-filter-controller
The ESP32-S3 uses 3.3V. I want onboard indicator LEDs, and the option to have offboard LEDs as well. Using addressable WS2812-type LEDs is flexible. These need a 5V supply.