
Proteus mitsubishi76-adapter
rusefi/proteus-mitsubishi76-adapter
2 gen DSM 1995-1999 Mitsubishi Eclipse and Eagle Talon Turbo DSM ECU Pinouts

(E39 m54 should be the ms42/43 like the e46, E39 = E46)
ProteusM54 is an open-source printed circuit board by rusefi, from the rusefi/proteus-M54-adapter repository on GitHub. It is a 4-layer board of 182 × 160 mm with 146 parts on 217 nets, routed with 1,152 tracks and 356 vias.
It is built around the ISL9V3040S3ST, AUIPS2041LTR and XH-10AW. Its parts include 92 connectors, 16 resistors, 8 fuses, 7 transistors and 5 diodes.
Proteus adapter for e46 non-M3 BMW
(E39 m54 should be the ms42/43 like the e46, E39 ~= E46)
https://github.com/rusefi/rusefi/wiki/BMW-e46
134 pin + Nissan board outline
https://raw.githubusercontent.com/wiki/rusefi/rusefi/OEM-Docs/Bmw/3_Series_e46/2002_bmw_325_ecu.png
https://docs.google.com/spreadsheets/d/16_VjNrk-DbMP_yDqGFelwavrGfiC9wFp73RgForjQzM
| Qty | Value | Footprint | References |
|---|---|---|---|
| 83 | Pad | hellen-one-common:PAD-TH | P1, P2, P10, P11, P12, P13, P14, P15, P16, P17, P18, P19, P20, P21, P22, P23 +67 |
| 7 | PROTO_AREA | hellen-one-common:PROTO_AREA | G2, G3, G4, G5, G6, G7, G8 |
| 6 | 10A | hellen-one-common:36911600000 | F3, F4, F5, F6, F7, F8 |
| 6 | 22 | hellen-one-common:R0603 | R2, R3, R4, R7, R8, R9 |
| 6 | DNP | Resistor_SMD:R_2512_6332Metric | R10, R11, R12, R13, R14, R15 |
| 6 | ISL9V3040S3S | Package_TO_SOT_SMD:TO-263-2 | Q1, Q2, Q3, Q4, Q5, Q6 |
| 5 | D_Schottky | Diode_SMD:D_SMA | D1, D2, D3, D4, D5 |
| 2 | 100n | hellen-one-common:C0603 | C1, C3 |
| 2 | 47p | hellen-one-common:C0603 | C2, C4 |
| 2 | 51k | hellen-one-common:R0603 | R5, R6 |
| 2 | Conn_01x01 | MountingHole:MountingHole_5.5mm | J4, J5 |
| 2 | Conn_01x01 | MountingHole:MountingHole_3.5mm | J1, J2 |
| 2 | Fuse-Pad-Pad | hellen-one-common:PAD-1206-PAD | F1, F2 |
| 1 | 10k | Resistor_SMD:R_0402_1005Metric | R16 |
| 1 | 7-967288-1 | kicad6-libraries:TE_7-967288-1 | J9 |
| 1 | AUIPS2041LTR | Package_TO_SOT_SMD:SOT-223 | Q7 |
| 1 | Conn_01x01 | MountingHole:MountingHole_4.5mm | J6 |
| 1 | Conn_01x01 | TestPoint:TestPoint_Pad_D4.0mm | J7 |
| 1 | Conn_01x06 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J3 |
| 1 | Jumper-Pad-Pad | hellen-one-common:PAD-0805-PAD | R1 |
| 1 | LOGO | LOGO | G*** |
| 1 | MPX4/MPXH6400_MAP | kicad6-libraries:MPX-4_MAP | U2 |
| 1 | MPXxx6115A | kicad6-libraries:MPX_SOP_SSOP | U1 |
| 1 | Module-can-0.1 | hellen-one-can-0.1:can | M2 |
| 1 | Module-wbo-0.3 | hellen-one-wbo-0.3:wbo | M3 |
| 1 | RUSEFI_LOGO | kicad6-libraries:rusefi_logo | G1 |
| 1 | XH-10AW | Connector_JST:JST_XH_S10B-XH-A_1x10_P2.50mm_Horizontal | J10 |
| 1 | proteus | kicad6-libraries:proteus | BRD1 |

rusefi/proteus-mitsubishi76-adapter
2 gen DSM 1995-1999 Mitsubishi Eclipse and Eagle Talon Turbo DSM ECU Pinouts

rusefi/proteus-M73tu-adapter
V12 harness uses TWO 134 pin connectors - one with BLACK plugs another with GREY plugs.


rusefi/hellen-miata-NB2
a rusEFI board with a 72 pin connector. Works for a Mazda Miata NB2 or any generic 8 cylinder vehicle :)

alpauna/TritonECU
ESP32-S3 engine control unit — fuel injection, ignition timing, wideband O2 (CJ125/LSU 4.9), dashboard, and MQTT telemetry


rusefi/proteus-Honda-K-125-adapter
Connector Pinout Spreadhseet, with links to wiring drawings

rusefi/proteus-Honda-OBD1-adapter
🟢 See https://github.com/rusefi/proteus-Honda-OBD2A-adapter for a much happier adapter board 🟢
It measures 182 × 160 mm and has 4 copper layers, 1.59 mm thick.
146 parts, built around the ISL9V3040S3ST, AUIPS2041LTR and XH-10AW. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the rusefi/proteus-M54-adapter repository on GitHub, at the commit this page was made from: the board is proteusM54.kicad_pcb and its schematic proteusM54.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask rusefi before reusing the design.