
Uaefi
rusefi/uaefi
🔴Community support ONLY 🔴 https://www.facebook.com/groups/rusEfi 🔴 Discord🔴 Commercial Support 🔴

Hellen154hyundai is an open-source printed circuit board by rusefi, from the rusefi/hellen154hyundai repository on GitHub. It is a 4-layer board of 164 × 156 mm with 207 parts on 356 nets, routed with 2,749 tracks and 475 vias.
It is built around the VNLD5160TR-E, 1N4148WS and B5819W, with the CR1220-2 among its other parts. Its parts include 79 resistors, 62 connectors, 35 diodes, 8 ICs and 2 fuses.
KiCAD runs rusEFI
4 layer board 165 * 156mm
rusEFI Pinout https://docs.google.com/spreadsheets/d/14IxjitlEFrC2bSp0IRdNRyXZondlvw2CmJ3Q9DUdvyo
Also useful document https://docs.google.com/spreadsheets/d/1ywuDLkhp-Q8VnNsPLQVZCZtjmalo7IQzmFDbDqwyniM
| Qty | Value | Footprint | References |
|---|---|---|---|
| 54 | Pad | hellen-one-common:PAD-TH | P2, P10, P11, P13, P14, P15, P16, P18, P19, P20, P22, P23, P24, P25, P26, P27 +38 |
| 32 | 4.7k | hellen-one-common:R0603 | R2, R5, R13, R26, R31, R33, R37, R41, R42, R43, R44, R45, R48, R49, R50, R61 +16 |
| 31 | Jumper-Pad-Pad | hellen-one-common:PAD-0805-PAD | R3, R4, R12, R17, R22, R27, R28, R29, R30, R32, R34, R35, R36, R38, R39, R40 +15 |
| 11 | 1N4148WS | hellen-one-common:SOD-323 | D3, D20, D21, D22, D23, D24, D26, D27, D33, D34, D35 |
| 10 | B5819W | hellen-one-common:SOD-123 | D1, D2, D5, D10, D15, D39, D40, D41, D42, D44 |
| 10 | LED-WHITE-0603 | hellen-one-common:LED-0603 | D16, D17, D18, D19, D28, D29, D30, D36, D37, D38 |
| 8 | VNLD5160TR-E | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1, U2, U3, U4, U5, U6, U7, U12 |
| 7 | PROTO_AREA_2 | kicad6-libraries:PROTO_AREA_2 | G4, G5, G6, G7, G8, G9, G10 |
| 6 | DNP | hellen-one-common:R0603 | R1, R10, R11, R23, R24, R25 |
| 4 | LED-RED-0603 | hellen-one-common:LED-0603 | D6, D7, D8, D9 |
| 3 | 1k | hellen-one-common:R0603 | R14, R15, R18 |
| 3 | 20k | hellen-one-common:R0603-4 | R7, R16, R76 |
| 3 | 680k | hellen-one-common:R0603 | R19, R20, R21 |
| 2 | Conn_01x01 | TestPoint:TestPoint_Pad_D2.0mm | J22, J24 |
| 2 | Fuse-Pad-Pad | hellen-one-common:PAD-1206-PAD | F1, F2 |
| 2 | LOGO | LOGO | G***, Gqr |
| 2 | Module-motor-driver-0.1 | hellen-one-motor-driver-0.1:motor-driver | M4, M7 |
| 1 | 10k | hellen-one-common:R0603-4 | R6 |
| 1 | 284617-1 | kicad6-libraries:TE_284617-1 | P1 |
| 1 | 39281063 | Connector_Molex:Molex_Mini-Fit_Jr_5566-06A_2x03_P4.20mm_Vertical | J4 |
| 1 | 39281123 | Connector_Molex:Molex_Mini-Fit_Jr_5566-12A_2x06_P4.20mm_Vertical | J2 |
| 1 | CR1220 | kicad6-libraries:CR1220-2 | BT1 |
| 1 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_2x02_P2.54mm_Vertical | J3 |
| 1 | Conn_01x05_Male | Connector_JST:JST_EH_B5B-EH-A_1x05_P2.50mm_Vertical | J1 |
| 1 | DISCLAIMER | kicad6-libraries:Off_Road_Disclaimer | G2 |
| 1 | LOGO | kicad6-libraries:rusefi_logo | G1 |
| 1 | LOGO | hellen-one-common:LOGO | G3 |
| 1 | Module-can-0.1 | hellen-one-can-0.1:can | M6 |
| 1 | Module-knock-0.2 | hellen-one-knock-0.2:knock | M9 |
| 1 | Module-mcz33810-0.1 | hellen-one-mcz33810-0.1:mcz33810 | M3 |
| 1 | Module-mega-mcu144-0.6 | hellen-one-mega-mcu144-0.6:mega-mcu144 | M1 |
| 1 | Module-power_12and5V-0.2 | hellen-one-power_12and5V-0.2:power_12and5V | M2 |
| 1 | Module-wbo-0.5 | hellen-one-wbo-0.5:wbo | M5 |
| 1 | USB_B | Connector_USB:USB_B_OST_USB-B1HSxx_Horizontal | J40 |

rusefi/uaefi
🔴Community support ONLY 🔴 https://www.facebook.com/groups/rusEfi 🔴 Discord🔴 Commercial Support 🔴

ADVecu/Hellen-PROLT
A: .github/workflows/update-hellen-one-reference.yaml is set to pull latest hellen daily!


ozeromer1111/hellen-example
A: .github/workflows/update-hellen-one-reference.yaml is set to pull latest hellen daily!

P4ulBr4ndt/hellen-bremen
This is trying to be yet another HD ECU based on rusEFI.\ Commercial rusEFI based HD ECUs:\ https://www.nmstec.ca/product/hdrevb/ This seems to be the initial community development? https://impactwiringsolutions.com/…


eelstretching/led-processor-board
A board with a processor and a couple of other things that can talk to an LED output board.

zinedkahitaf-lang/AKD-SAFE-SourceControl
Infrastructure-Based Active Engineering Safety Platform. Move the safety burden from the worker to the hazard. Engineering prototype - not a certified safety device.
It measures 164 × 156 mm and has 4 copper layers, 1.61 mm thick.
207 parts, built around the VNLD5160TR-E, 1N4148WS, B5819W and CR1220-2. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the rusefi/hellen154hyundai repository on GitHub, at the commit this page was made from: the board is hellen154hyundai.kicad_pcb and its schematic LS4_FLYBACK.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask rusefi before reusing the design.