4 layers78.7 × 63.5 mm
Hdmi trigger interface
ruffner/MojoV3_HDMI_Interface
FPGA SLI controller with dual HDMI and Basler machine vision camera trigger interface PCB
19 parts4
2 layers43 × 90 mm
LauCameraTrigger MimasA7
ruffner/MojoV3_HDMI_Interface4FPGA SLI controller with dual HDMI and Basler machine vision camera trigger interface PCB
- Size
- 43 × 90 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 21
- Nets
- 65
- Pads
- 101
- Tracks, vias
- 78, 6
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 21 Jan 2019
- Updated
- 1 Jan 2025
Overview
LauCameraTrigger MimasA7 is an open-source printed circuit board by ruffner, from the ruffner/MojoV3_HDMI_Interface repository on GitHub. It is a 2-layer board of 43 × 90 mm with 21 parts on 65 nets, routed with 78 tracks and 6 vias.
Its parts include 8 resistors and 4 connectors. It belongs with the interfaces and adapters boards of this library.
README
README.mdDual HDMI + Camera Interface PCB for 120Hz SLI
Parts
21| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | TestPoint | TestPoint:TestPoint_Pad_D2.0mm | TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8, TP9 |
| 8 | R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R3, R4, R5, R6, R7, R8 |
| 2 | Conn_02x16_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x16_P2.54mm_Vertical | J4, J5 |
| 1 | Conn_01x01 | Connector_Pin:Pin_D1.3mm_L11.0mm | J1 |
| 1 | DE9_Plug_MountingHoles | Connector_Dsub:DSUB-9_Male_Horizontal_P2.77x2.84mm_EdgePinOffset4.94mm_Housed_MountingHolesOffset4.94mm | J3 |
More from ruffner/MojoV3_HDMI_Interface
1Similar boards
- 2 layers28.3 × 39.8 mm
LevelShifter
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software
21 parts5.1kGPL-3.0 - 2 layers171.2 × 72.9 mm
Amiga gfxcard before pour
mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog
21 parts1k - 2 layers93.9 × 46 mm
- 2 layers45.5 × 42.9 mm
Esphome han reader
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
21 parts915 - 2 layers31.8 × 14.5 mm
Esp prog
drandyhaas/KiCadRoutingTools
A set of Python/Rust tools to aid routing in KiCad
21 parts744MIT - 2 layers23.5 × 15.8 mm
QuiverAttachPCB
Arrow-air/project-quiver
Project Quiver documentation, designs, and project artifacts.
21 parts617CERN-OHL-S-2.0 - 2 layers69.9 × 41.3 mm
- 2 layers161.3 × 111.8 mm
Questions
How big is the LauCameraTrigger MimasA7 PCB?
It measures 43 × 90 mm and has 2 copper layers, 1.6 mm thick.
What parts does the LauCameraTrigger MimasA7 use?
21 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the LauCameraTrigger MimasA7 KiCad files?
From the ruffner/MojoV3_HDMI_Interface repository on GitHub, at the commit this page was made from: the board is pcb/LauCameraTrigger_MimasA7/LauCameraTrigger_MimasA7.kicad_pcb and its schematic pcb/Camera_Trigger_Interface.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the LauCameraTrigger MimasA7 design in my own project?
Its repository states no licence, so its author keeps all rights: ask ruffner before reusing the design.