

Samn 8
Kicad project for samn
- Size
- 32 × 72 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 35
- Nets
- 53
- Pads
- 161
- Tracks, vias
- 0, 0
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 8 Aug 2019
- Updated
- 31 Dec 2019
Overview
Samn 8 is an open-source printed circuit board by rubend056, from the rubend056/samn_design repository on GitHub. It is a 2-layer board of 32 × 72 mm with 35 parts on 53 nets.
It is built around the ATMEGA328PB-AU. Its parts include 15 connectors, 7 capacitors, 6 resistors, 3 ICs and 1 inductor. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1Parts
35| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | Conn_01x06_Female | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J1, J3, J9, J10 |
| 3 | 22pF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C3, C5, C6 |
| 3 | Conn_01x06 | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J6, J7, J8 |
| 2 | 100uF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C4, C7 |
| 2 | AudioJack4 | Connector_Audio:Jack_3.5mm_PJ320D_Horizontal | J1, J7 |
| 2 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2, J11 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R7 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C2 |
| 1 | 1M | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R6 |
| 1 | 200 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R4 |
| 1 | 2V 20mA | LED_THT:LED_D3.0mm_FlatTop | LED_I1 |
| 1 | 4.7uF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1 |
| 1 | 4.7uH | common:NRS4018T4R7MDGJ | L1 |
| 1 | 5.1k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R5 |
| 1 | 576k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R2 |
| 1 | 6P6C | Connector_RJ:RJ12_Amphenol_54601 | J6 |
| 1 | 8MHz | Crystal:Crystal_HC49-4H_Vertical | Y1 |
| 1 | 976k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1 |
| 1 | AA | common:AA_Holder | V1 |
| 1 | ATmega328PB-AU | Package_QFP:TQFP-32_7x7mm_P0.8mm | U2 |
| 1 | Conn_01x03 | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J5 |
| 1 | Conn_01x04 | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J12 |
| 1 | Conn_02x03_Male_ICSP | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J4 |
| 1 | MCP1640BCH | Package_TO_SOT_SMD:SOT-23-6_Handsoldering | U1 |
| 1 | NRF24L01_Breakout | common:nRF24L01_Breakout_mine | U3 |
More from rubend056/samn_design
3Similar boards
- 2 layers78 × 130 mm

Lofence
kiu/lofence
LoFence is a LoRaWAN capable IoT electric fence monitoring system running on the The Things Network.
65 parts142MIT - 2 layers102 × 81.5 mm

C64pico
silvervest/c64pico
This is a tiny emulated C64 running on a Raspberry Pi Pico! Full details of the build can be found at https://www.youtube.com/watch?v=hgLhGpbC6E4
97 parts86 - 2 layers58.4 × 34.3 mm

SIO2SD
c0pperdragon/SIO2SD
An Arduino-based floppy drive emulator for the atari 8 bit computers.
26 parts83 - 2 layers200 × 100 mm

Regalodilara
valerionew/very-good-uc-doggos
A special graduation present for a special friend. Six microcontrollers in one devboard
91 parts50 - 2 layers88.9 × 50.8 mm

BLDC BIZ CARD
ageppert/Brushless-Motor-Biz-Card
A brushless motor and driver built in to a business card form-factor for learning and experimenting!
82 parts38MIT - 2 layers52.1 × 37.4 mm

Consolizer
orangeglo/PS2PSP
Board to connect a PS2 controller to a PSP 2000 (PSP Consolizer)
25 parts38GPL-3.0 - 2 layers67.3 × 54 mm

Jeep radio
latonita/jeep-canbus
Projects around CAN BUS in Chrysler Jeep - VES enabler, other small features
52 parts30MIT - 2 layers91.4 × 92.5 mm

Questions
How big is the Samn 8 PCB?
It measures 32 × 72 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Samn 8 use?
35 parts, built around the ATMEGA328PB-AU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Samn 8 KiCad files?
From the rubend056/samn_design repository on GitHub, at the commit this page was made from: the board is samn/samn_8.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Samn 8 design in my own project?
Its repository states no licence, so its author keeps all rights: ask rubend056 before reusing the design.

