Skip to the content
2 layers47.3 × 72.5 mmSamn 6, the printed circuit board in 3D

Kicad project for samn

Size
47.3 × 72.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
25
Nets
32
Pads
107
Tracks, vias
817, 20
Pours
3
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
8 Aug 2019
Updated
31 Dec 2019

Overview

Samn 6 is an open-source printed circuit board by rubend056, from the rubend056/samn_design repository on GitHub. It is a 2-layer board of 47.3 × 72.5 mm with 25 parts on 32 nets, routed with 817 tracks and 20 vias.

It is built around the ATMEGA328-PU. Its parts include 7 capacitors, 6 resistors, 5 connectors, 3 ICs and 1 inductor. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

1

Parts

25
QtyValueFootprintReferences
322pFCapacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolderC3, C5, C6
2Conn_01x06_FemaleConnector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_VerticalJ1, J3
1100uFCapacitor_THT:CP_Radial_D5.0mm_P2.00mmC4
110kResistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolderR7
110uFCapacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolderC2
11MResistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolderR6
1200Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolderR4
12V 20mALED_THT:LED_D3.0mm_FlatTopLED_I1
14.7uFCapacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolderC1
14.7uHcommon:SWRH3D16R-4R7NTL1
147uFCapacitor_THT:CP_Radial_D5.0mm_P2.00mmC7
15.1kResistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolderR5
1576kResistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolderR2
18MHzCrystal:Crystal_HC49-4H_VerticalY1
1976kResistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolderR1
1AAcommon:AA_HolderV1
1ATmega328-PUPackage_DIP:DIP-28_W7.62mm_Socket_LongPadsU2
1Conn_01x03Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_VerticalJ5
1Conn_01x08_FemaleConnector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_VerticalJ2
1Conn_02x03_Male_ICSPConnector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_VerticalJ4
1MCP1640BCHPackage_TO_SOT_SMD:SOT-23-6_HandsolderingU1
1NRF24L01_Breakoutcommon:nRF24L01_Breakout_mineU3

More from rubend056/samn_design

3
  • 2 layers201 × 65.1 mmPrototype, the printed circuit board in 3D

    Prototype

    rubend056/samn_design

    Kicad project for samn

    44 parts
  • 2 layers32 × 72 mmSamn 8, the printed circuit board in 3D

    Samn 8

    rubend056/samn_design

    Kicad project for samn

    35 parts
  • 2 layers47.3 × 72.5 mmLetter, the printed circuit board in 3D

    Letter

    rubend056/samn_design

    Kicad project for samn

    27 parts

Similar boards

  • 2 layers104.9 × 75.2 mmHandipi kb, the printed circuit board in 3D

    Handipi kb

    brickbots/HandiPi

    Handheld RPI4 based computer with keyboard and display

    95 parts814MIT
  • 2 layers228 × 98 mmPlaid, the printed circuit board in 3D

    Plaid

    hsgw/plaid

    12x4 ortholinear usb keyboard made by Through Hole components ONLY.

    139 parts779MIT
  • 2 layers94.6 × 46.1 mmHeaterMeterPI, the printed circuit board in 3D

    HeaterMeterPI

    CapnBry/HeaterMeter

    HeaterMeter and LinkMeter Arduino BBQ Controller

    66 parts557MIT
  • 2 layers50 × 50 mmAvrcraft poed, the printed circuit board in 3D

    Avrcraft poed

    cnlohr/avrcraft

    Minecraft server optimized for 8-bit devices.

    58 parts471
  • 2 layers284.7 × 94.2 mmLumberjack, the printed circuit board in 3D

    Lumberjack

    peej/lumberjack-keyboard

    5x12 ortholinear through-hole component keyboard PCB for standard 60% cases

    165 parts403MIT
  • 2 layers132.1 × 45.7 mmIPoS, the printed circuit board in 3D

    IPoS

    peterheinrich/InternetOverSpaghetti

    Transmitting IP packages over a pair of spaghetti thus demonstrating how media independent IP really is.

    42 parts342
  • 2 layers63.3 × 57.2 mmRam Tester, the printed circuit board in 3D

    Ram Tester

    tops4u/Ram-Tester

    Ram Tester for vintage CBM Computer RAM Chips

    42 parts118
  • 2 layers285 × 117 mmTartan, the printed circuit board in 3D

    Tartan

    hsgw/tartan

    60% keyboard made by through-hole parts only

    171 parts98

Questions

How big is the Samn 6 PCB?

It measures 47.3 × 72.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Samn 6 use?

25 parts, built around the ATMEGA328-PU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Samn 6 KiCad files?

From the rubend056/samn_design repository on GitHub, at the commit this page was made from: the board is samn_small/samn_6.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Samn 6 design in my own project?

Its repository states no licence, so its author keeps all rights: ask rubend056 before reusing the design.