
Bus protection
rubenbaldewsing/ato-library
Various ato and fabll module for use with atopile

Various ato and fabll module for use with atopile
Rotary encoder advanced is an open-source printed circuit board by rubenbaldewsing, from the rubenbaldewsing/ato-library repository on GitHub, published under the MIT licence. It is a 2-layer board with 11 parts on 11 nets, routed with 33 tracks and 3 vias.
Its parts include 6 resistors, 4 capacitors and 1 IC.
This is a monorepo for various ato and fabll packages for your projects made with atopile that can be found in the official atopile package registry
| Package | Modules | Description | Version |
|---|---|---|---|
| analog-devices-max14778 | 1 module | Analog Devices MAX14778 dual 4:1 +/-25V above/below the rails analog multiplexer | 0.1.2 |
![]() | analog_devices_max14778_driver | Analog Devices MAX14778 dual 4:1 +/-25V above/below the rails analog multiplexer | |
| connectors | 4 modules | Miscellaneous connectors | 0.2.3 |
![]() | dual_banana_connectors | Dual banana connectors (Red and Black) with 3/4" (19.05mm) spacing. | |
![]() | qwiic_vertical | Vertical QWIIC connector https://www.sparkfun.com/qwiic | |
![]() | qwiic_horizontal | Horizontal QWIIC connector https://www.sparkfun.com/qwiic | |
![]() | fan_connector | Connector for standard 4-pin 12v computer fans - 12V - Tach - PWM | |
| dcdc-converters | 2 modules | DCDC converters | 0.2.2 |
![]() | b0505s1wr3 | EVISUN B0505S-1WR3 5V to 5V isolated DCDC converter with shortcircuit protection - 5V input - 5V output - 1W power rating | |
![]() | mpm3610-12vin-5vout | MPM3610 with component parameters optimized for 12V input and 5V output | |
| debug-interfaces | 4 modules | SWD and tag connect headers for programming and debugging | 0.2.3 |
![]() | arm_cortex_m_debug_header | 10 pin debug header with SWD pinout according to ARM Cortex M debug specification https://documentation-service.arm.com/static/5fce6c49e167456a35b36af1 | |
![]() | swd_tc2030_idc_nl | Tag-Connect TC2030-IDC-NL (6-pin) landing pattern with SWD pinout | |
![]() | swd_tc2030_idc_fp | Tag-Connect TC2030-IDC-FP (6-pin) landing pattern with SWD pinout | |
![]() | segger_jlink_compact | SEGGER J-Link compact PCBA mount | |
| esp32c3 | 2 modules | ESP32 C3 microcontroller | 0.2.3 |
![]() | esp32_c3_mini_driver | ESP32 S3 WROOM-1 module with build-in antenna and supporting components | |
![]() | esp32_c3_mini_ufl_driver | ESP32 S3 WROOM-1 module with u.fl antenna connector and supporting components | |
| esp32s3 | 1 module | ESP32 S3 microcontroller | 0.2.2 |
![]() | esp32_s3_wroom_driver | ESP32 S3 WROOM-1 module with build-in antenna and supporting components - 32MB flash - 2MB PSRAM | |
| ina228 | 1 module | INA228 low voltage power monitor with I2C interface | 0.2.2 |
![]() | ina228 | INA228 85-V, 20-bit, ultra-precise, I2C output current/voltage/power/energy/charge monitor with alert | |
| ldos | 1 module | Various Low Dropout Regulators (LDOs) | 0.2.3 |
![]() | 5v_to_3v3 | 5V to 3.3V 600mA (max 1100mA) LDO | |
| leds | 2 modules | Various (addressable) LED components and modules | 0.2.2 |
![]() | addressable_led_connector_driver | XT30 connector with 2 additional data pins. Wired for connecting to addressable LED strips. | |
![]() | addressable_led_driver | Addressable LED with decoupling capacitors. Usage: from "ruben-iteng/ato-library/leds/addressable_leds.ato" import AddressableLED module MyProject: ... leds = new AddressableLED[3] power = new ElectricPower data_in = new ElectricLogic for led in leds: led -> WS2812B_5050_Black led.power ~ power data_in ~> leds[0] ~> leds[1] ~> leds[2] | |
| logic | 5 modules | Digital logic related components and modules | 0.2.2 |
![]() | aip74lvc1t45_driver | Single channel bidirectional buffer. 1.2V-5.5V logic levels. SOT-23-6 | |
![]() | sn74lvc2g34dbvrumw_driver | UMWYoutai Semiconductor Co., Ltd. 74LVC2G34 Dual buffer. | |
![]() | sn74lvc3g14dc_driver | - | |
![]() | iso1540_driver | ISO1540 low-power bidirectional I2C isolators. - 3.0V to 5.5V power and signal levels - up to 100Mhz I2C | |
![]() | sn74cb3q3251pwr_driver | Texas Instruments SN74CB3Q3251PWR 1 to/from 8 FET multiplexer/demultiplexer 2.5V/3.3V low-voltage high-bandwidth bus switch | |
| logos | 1 module | Various logos | 0.2.0 |
![]() | faebryk_logo_8x9mm | faebryk Logo 8x9mm | |
| microchip-emc2101 | 1 module | Microchip EMC2101 fan driver | 0.1.2 |
![]() | microchip_emc2101_driver | MicrochipEMC2101 fan driver Automatic Beta Compensation - Resistance Error Correction - Self-programming with available SMBus compatible EEPROM - Selectable PWM or DAC fan driver output - Temperature Monitors - External channel ±1°C accuracy - Internal channel ±2°C accuracy - 3.3 Volt Operation (5 Volt Tolerant Input Buffers) - SMBus 2.0 Compliant Interface, supports TIMEOUT | |
| nxp_semiconductors-pca95xx | 7 modules | NXP Semiconductors PCA95xx family of I2C I/O expanders | 0.2.0 |
| pca9554pw_driver | NXP Semiconductors PCA9554 TSSOP16 package | ||
| pca9554apw_driver | NXP Semiconductors PCA9554A TSSOP16 package | ||
| pca9554abs_driver | NXP Semiconductors PCA9554A HVQFN16(4x4mm) package | ||
| pca9554bs_driver | NXP Semiconductors PCA9554 HVQFN16(4x4mm) package | ||
| pca9536d_driver | NXP Semiconductors PCA9536D SO-8 package | ||
| pca9536tk_driver | NXP Semiconductors PCA9536TK HVSON-8 package | ||
| pca9536dp_driver | NXP Semiconductors PCA9536DP TSSOP-8 package | ||
| relays | 3 modules | Relay modules | 0.2.2 |
![]() | driven_dpdt_bistable_relay | Bistable DPDT relay with driver and indicator LEDs - 5V coil power - 5V/3.3V logic power - 2A contact carry current - TC118S DC motor driver (H-bridge) as relay driver | |
![]() | driven_dpdt_bistable_relay_push_terminal | DrivenDPDTBistableRelay with push terminal | |
![]() | dc_motor_driver | Shenzhen Fuman Elec TC118S dc motor driver - Single-channel built-in high-power MOS full-bridge driver - Supports forward, reverse, stop, and brake functions - Built-in efficient thermal response and thermal protection - Low on-resistance (1.6Ω) - Maximum continuous output current: 1.8A, peak current: 2.5A | |
| rohm_semiconductor_bh1750fvi | 1 module | ROHM Semiconductor BH1750FVI-TR Digital Ambient Light Sensor with I2C interface | 0.1.1 |
| bh1750_driver | Digital ambient light sensor with I2C interface - I2C bus Interface (f/s Mode Support) - Spectral responsibility is approximately human eye response - Illuminance to Digital Converter - Wide range and High resolution (1 - 65535 lx) - Low Current by power down function - 50Hz/60Hz Light noise reject-function - 1.8V Logic input interface - No need any external parts - Light source dependency is little (Incandescent Lamp, Fluorescent Lamp, Halogen Lamp, White LED, Sun Light) - It is possible to select 2 type of I2C slave-address - Adjustable measurement result for influence of optical window (It is possible to detect min. 0.11 lx, max. 100000 lx by using this function) - Small measurement variation (+/- 20%) - The influence of infrared is very small | ||
| rs485 | 4 modules | RS485 related modules | 0.2.3 |
![]() | bus_protection | RS485 bus protection. - Overvoltage protection - Overcurrent protection - Common mode filter - Termination resistor - ESD protection - Lightning protection based on: https://www.mornsun-power.com/public/uploads/pdf/TD(H)541S485H.pdf | |
![]() | maxlinear_sp3485en_driver | Simple UART to RS485 converter. UART and write enable interface in, RS485 interface out. | |
![]() | analog_devices_adm2587ebrwz_driver | Isolated UART to half duplex RS485 interface | |
![]() | chipanalog_is2092a_driver | Isolated powered UART to RS485 transceiver design block. - 3.3V or 5V logic power - 3.3V or 5V module power - 0.5 Mbps UART - Read enable/write enable input - RS485 half duplex - ANSI/ESDA/JEDEC JS-001 ESD protection - JESD22-C101 CDM protection | |
| switches | 2 modules | Rotary encoders, switches, and other switch like components and modules | 0.1.4 |
![]() | rotary_encoder_advanced | Rotary encoder + switchwith debouncing and hysteresis. Specialize the rotary encoder in your application: rot_encoder = new RotaryEncoderAdvanced rot_encoder.encoder -> ALPSALPINE_EC11E15244B2 | |
![]() | test | Test module for buttons | |
| texas_instruments_lm66200 | 1 module | Texas Instruments LM66200DRLR 1.6 V to 5 V, 2.5-A Dual Ideal Diode With Automatic Switchover | 0.1.1 |
![]() | lm66200 | Texas Instruments LM66200 dual ideal diode with automatic switchover. - Input voltage range: 1.6 V to 5.5 V - Maximum continuous current: 2.5 A - On-resistance: 40 mΩ (typical) - Standby current: 50 nA (typical) - Quiescent current: 1.32 μA (typical) - Automatic diode switchover - Controlled output slew rate: - 1.3 ms (typical) at 3.3 V. - Reverse current blocking when VOUT > VINx. - Thermal shutdown. | |
| usb | 4 modules | USB connectors and circuitry | 0.3.1 |
![]() | usb_2_0_type_c_data_power_vertical_connector | USB 2.0 Type-C connector - 5V PD compatible - ESD protection - Fuse [500mA(hold), 1A(trip)] - Vertical USB Type-C connector | |
![]() | usb_2_0_type_c_data_power_horizontal_connector | USB 2.0 Type-C connector - 5V PD compatible - ESD protection - Fuse [500mA(hold), 1A(trip)] - Horizontal USB Type-C connector | |
![]() | usb_pd_power_sink_horizontal_connector | USB PD power sink with Horizontal Type-C connector Set the requested PD voltages as follows: 9V -> resistance = 6.8kohm 12V -> resistance = 24kohm 15V -> resistance = 56kohm 20V -> resistance = DNP pd_sink = new USBPDPowerSink pd_sink.pd_trigger.voltage_set_resistor.resistance = 56kohm +/- 1% | |
![]() | usb_pd_power_sink_vertical_connector | USB PD power sink with Vertical Type-C connector Set the requested PD voltages as follows: 9V -> resistance = 6.8kohm 12V -> resistance = 24kohm 15V -> resistance = 56kohm 20V -> resistance = DNP pd_sink = new USBPDPowerSink pd_sink.pd_trigger.voltage_set_resistor.resistance = 56kohm +/- 1% |
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 10kΩ ±1% 62.5mW | UNI_ROYAL_0402WGF1002TCE:R0402 | R1, R2, R3, R4, R5, R6 |
| 4 | 100nF ±10% 16V X7R | Samsung_Electro_Mechanics_CL05B104KO5NNNC:C0402 | C1, C2, C3, C4 |
| 1 | Texas_Instruments_SN74LVC3G14DCUR:VSSOP-8_L2.3-W2.0-P0.50-LS3.1-BR | U1 |

rubenbaldewsing/ato-library
Various ato and fabll module for use with atopile

rubenbaldewsing/ato-library
Various ato and fabll module for use with atopile

rubenbaldewsing/ato-library
Various ato and fabll module for use with atopile

rubenbaldewsing/ato-library
Various ato and fabll module for use with atopile

rubenbaldewsing/ato-library
Various ato and fabll module for use with atopile

rubenbaldewsing/ato-library
Various ato and fabll module for use with atopile

rubenbaldewsing/ato-library
Various ato and fabll module for use with atopile


rubenbaldewsing/ato-library
Various ato and fabll module for use with atopile

rubenbaldewsing/ato-library
Various ato and fabll module for use with atopile

rubenbaldewsing/ato-library
Various ato and fabll module for use with atopile

rubenbaldewsing/ato-library
Various ato and fabll module for use with atopile

google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards


FrameworkComputer/ExpansionCards
Reference designs and documentation to create Expansion Cards for the Framework Laptop

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!


tardate/LittleArduinoProjects
a collection of "Little Electronic & Arduino Projects", most involving electronics or an Arduino in one way or another!

basilfx/TRADFRI-Hacking
Hacking IKEA TRÅDFRI products, such as light bulbs, window blinds and other accessories.
11 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the rubenbaldewsing/ato-library repository on GitHub, at the commit this page was made from: the board is packages/switches/layouts/rotary_encoder_advanced/rotary_encoder_advanced.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).