2 layers38 × 100 mm
2 layers76.4 × 100 mm
Spotify controller nutzen
RT-CUSTOMZ/Spotify-Controller1- Size
- 76.4 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 127
- Nets
- 34
- Pads
- 372
- Tracks, vias
- 1,560, 96
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 18 Nov 2023
- Updated
- 5 Jan 2024
Overview
Spotify controller nutzen is an open-source printed circuit board by RT-CUSTOMZ, from the RT-CUSTOMZ/Spotify-Controller repository on GitHub. It is a 2-layer board of 76.4 × 100 mm with 127 parts on 34 nets, routed with 1,560 tracks and 96 vias.
It is built around the ESP32-C3-WROOM-02-H4 and AP2112K-3.3. Its parts include 32 resistors, 18 capacitors, 14 connectors, 14 switches and 12 diodes. It belongs with the ESP32 and RISC-V boards of this library.
Main components
2
ESP32-C3-WROOM-02-H4
SMD,20x18mm-105dBm -40℃~+105℃ 2.4GHz 20.5dBm 345mA 3V~3.6V 82mA Bluetooth5.0 ESP32-C3 On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD,20x18mm WiFi Modules ROHSEspressif SystemsWiFi Modules
AP2112K-3.3
SOT253.3V 600mA CMOS Low Dropout Linear Regulator with EnableDiodes IncorporatedUncategorised
README
README.mdSpotify-Controller
Für mehr Details schaut bitte ins Wiki.
Parts
127| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | MountingHole | MountingHole:MountingHole_2.7mm_M2.5 | H1, H1, H2, H2, H3, H3, H4, H4, H5, H5, H6, H6 |
| 10 | 100n | Capacitor_THT:C_Disc_D3.0mm_W2.0mm_P2.50mm | C2, C2, C3, C3, C5, C5, C6, C6, C12, C12 |
| 8 | 300R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R1, R11, R11, R15, R15, R16, R16 |
| 6 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R12, R12, R13, R13, R14, R14 |
| 6 | 1u | Pia_Lib:C_Radial_D5.0mm_H11.0mm_P2.00mm_liegend | C1, C1, C4, C4, C10, C10 |
| 6 | 22R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R7, R7, R9, R9, R10, R10 |
| 6 | Fiducial | Fiducial:Fiducial_1.5mm_Mask3mm | FID1, FID1, FID2, FID2, FID3, FID3 |
| 6 | SW_Push | Button_Switch_THT:SW_PUSH_6mm_H7.3mm | SW1, SW1, SW3, SW3, SW4, SW4 |
| 4 | 100R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2, R2, R3, R3 |
| 4 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4, R4, R5, R5 |
| 4 | 1N4148 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D2, D2, D3, D3 |
| 4 | 1N5819 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D4, D4, D5, D5 |
| 4 | Conn_01x09_Pin | Connector_PinHeader_1.27mm:PinHeader_1x09_P1.27mm_Vertical | J6, J6, J7, J7 |
| 4 | LOGO | LOGO | G***, G***, G***, G*** |
| 2 | 10K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R6, R6 |
| 2 | 1M | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R8, R8 |
| 2 | 3V3 | Connector_Pin:Pin_D1.3mm_L11.0mm | 3V3, 3V3 |
| 2 | 4n7 | Capacitor_THT:C_Disc_D4.7mm_W2.5mm_P5.00mm | C11, C11 |
| 2 | AP2112K-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U4, U4 |
| 2 | Bat+ | Connector_Pin:Pin_D1.0mm_L10.0mm | TP1, TP1 |
| 2 | Bat- | Connector_Pin:Pin_D1.0mm_L10.0mm | TP2, TP2 |
| 2 | Boot | Button_Switch_THT:SW_PUSH_6mm_H4.3mm | SW5, SW5 |
| 2 | Conn_01x03 | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J5, J5 |
| 2 | Conn_01x04 | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J2, J2 |
| 2 | Conn_01x05_Socket | Pia_Lib:Encoder KY-040 | J3, J3 |
| 2 | Conn_02x04_Top_Bottom | Pia_Lib:USB_C_and_Oled | J1, J1 |
| 2 | ESP32-C3-WROOM-02 | Pia_Lib:ESP32_C3_Wroom_02-easysolder | U1, U1 |
| 2 | GND | Connector_Pin:Pin_D1.3mm_L11.0mm | GND1, GND1 |
| 2 | LED | LED_THT:LED_D3.0mm | D1, D1 |
| 2 | LOGO | Pia_Lib:QRCode1x1 | G***, G*** |
| 2 | RotaryEncoder_Switch | Rotary_Encoder:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW6, SW6 |
| 2 | SW_DIP_x01 | Pia_Lib:Drahtschalter | SW7, SW7 |
| 2 | SW_Push | Button_Switch_THT:SW_PUSH_6mm_H4.3mm | SW2, SW2 |
| 2 | USB_B_Micro | Pia_Lib:USB_B_Micro_CN | J4, J4 |
| 2 | Zweifarb-LED | Pia_Lib:LED-3Pin | D6, D6 |
| 1 | Battery_Holder | Pia_Lib:Battery_holder | BT1 |
Questions
How big is the Spotify controller nutzen PCB?
It measures 76.4 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Spotify controller nutzen use?
127 parts, built around the ESP32-C3-WROOM-02-H4 and AP2112K-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Spotify controller nutzen KiCad files?
From the RT-CUSTOMZ/Spotify-Controller repository on GitHub, at the commit this page was made from: the board is HW/Spotify_controller_nutzen.kicad_pcb and its schematic HW/Spotify_controller.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Spotify controller nutzen design in my own project?
Its repository states no licence, so its author keeps all rights: ask RT-CUSTOMZ before reusing the design.
More from RT-CUSTOMZ/Spotify-Controller
1Similar boards
- 4 layers25.6 × 23.6 mm
CANNONBALL
user-will/PCB_CANNONBALL
An ESP32-C3 dev board with more sensors and features then you could know what to do with
61 parts14 - 2 layers27.9 × 66.1 mm
- 2 layers33.3 × 38 mm
ESP32-C3-WROOM02 dev board
pushtiujeniya/ESP32-C3-WROOM02_dev-board
This project is a custom 2-layer development board designed around the ESP32-C3-WROOM-02 Wi‑Fi + Bluetooth MCU module.
30 parts2 - 4 layers53.5 × 46 mm
- 2 layers52 × 43 mm
- 4 layers38 × 28.5 mm
Esp32 iot pcb
anasskrim61-wq/esp32-c3-mini
Custom ESP32-C3 Mini IoT hardware design and KiCad PCB project
29 parts1 - 4 layers52.9 × 79.1 mm
RealFCV1
bapsenpai-blip/STM32F405-4-layer-flight-controller
My first PCB revision, not fabricated yet, looking for design review
94 parts1 - 4 layers40.4 × 55.5 mm
