2 layers90.4 × 90.3 mm
InfinitiMirrorNutzen
RT-CUSTOMZ/InfinityMirror
A small inifinity mirror using WLED on an ESP8266
120 parts1CC0-1.0
2 layers30 × 45 mm
InfinitiMirror
RT-CUSTOMZ/InfinityMirror1A small inifinity mirror using WLED on an ESP8266
- Size
- 30 × 45 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 20
- Nets
- 25
- Pads
- 56
- Tracks, vias
- 60, 13
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 31 Aug 2023
- Updated
- 28 Sep 2023
Overview
InfinitiMirror is an open-source printed circuit board by RT-CUSTOMZ, from the RT-CUSTOMZ/InfinityMirror repository on GitHub, published under the CC0-1.0 licence. It is a 2-layer board of 30 × 45 mm with 20 parts on 25 nets, routed with 60 tracks and 13 vias.
It is built around the ESP-12F, BZT52C6V8 and FDN340P. Its parts include 5 capacitors, 5 resistors, 1 diode and 1 transistor. It belongs with the ESP8266 boards of this library.
Main components
3
ESP-12F
SMD,24x16mm-40℃~+85℃ -96dBm 15dBm 2.4GHz 3.3V 375mA 55mA PCB UART WIFI4 SMD,24x16mm WiFi Modules ROHSDOITWiFi Modules
BZT52C6V8
SOD-1231 Independent 30Ω 500mW 500nA@3.5V 6.46V~7.14V 6.8V SOD-123 Zener Diodes ROHSMDDZener Diodes
FDN340P
SOT-23-55℃~+150℃ 1 P-Channel 1.5V 121pF 20V 2A 500mW 56pF 7.2nC@4.5V 70mΩ@4.5V 779pF P-Channel SOT-23 MOSFETs ROHSonsemiMOSFETs
Parts
20| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 10k | Resistor_SMD:R_0805_2012Metric | R1, R2, R3, R4 |
| 2 | 100nF | Capacitor_SMD:C_0805_2012Metric | C1, C3 |
| 2 | 10u | Capacitor_SMD:C_1206_3216Metric | C2, C4 |
| 2 | Ground | Connector_PinSocket_2.54mm:PinSocket_1x01_P2.54mm_Vertical | GND, GND |
| 1 | 100k | Resistor_SMD:R_0805_2012Metric | R5 |
| 1 | 330u | Capacitor_SMD:CP_Elec_6.3x7.7 | C5 |
| 1 | 5V | Connector_PinSocket_2.54mm:PinSocket_1x01_P2.54mm_Vertical | 5V_OUT |
| 1 | 5V_In | Connector_PinSocket_2.54mm:PinSocket_1x01_P2.54mm_Vertical | 5V_IN |
| 1 | BZT52C6V8 | Diode_SMD:D_SOD-123F | D1 |
| 1 | ESP-12F | RF_Module:ESP-12E | ESP8266 |
| 1 | FDN340P | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | LED_DATA | Connector_PinSocket_2.54mm:PinSocket_1x01_P2.54mm_Vertical | LED_DO |
| 1 | LOGO | Logo:FH-LogoSilk | G*** |
| 1 | LT1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | LM1337 |
Questions
How big is the InfinitiMirror PCB?
It measures 30 × 45 mm and has 2 copper layers, 1.6 mm thick.
What parts does the InfinitiMirror use?
20 parts, built around the ESP-12F, BZT52C6V8 and FDN340P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the InfinitiMirror KiCad files?
From the RT-CUSTOMZ/InfinityMirror repository on GitHub, at the commit this page was made from: the board is PCB/InfinitiMirror.kicad_pcb and its schematic PCB/InfinitiMirror.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the InfinitiMirror design in my own project?
Its repository publishes it under the CC0-1.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from RT-CUSTOMZ/InfinityMirror
1Similar boards
- 2 layers65 × 56 mm
- 4 layers166.7 × 58.4 mm
- 2 layers54.6 × 80.6 mm
Grbl controller
mp035/grbl_controller
An esp32 GRBL Controller that can be used as a drop-in replacement for Weihong NCStudio Motion Cards
44 partsMPL-2.0 - 10 layers224.5 × 160 mm
Haasoscope pro adc fpga board
drandyhaas/HaasoscopePro
Affordable 2 GHz 3.2 GS/s 12 bit open-source open-hardware expandable USB real-time oscilloscope
586 parts485MIT - 4 layers46.8 × 34.8 mm
SmartWatch V4
Bellafaire/ESP32-Smart-Watch
An open source smartwatch based on the ESP32 compatible with the Arduino IDE.
74 parts258MIT - 2 layers97 × 77.5 mm
ESPlant
CCHS-Melbourne/ESPlant
Environmental Sensor Plant - solar WiFi gardening/meteorological sensor using ESP8266
77 parts37 - 4 layers105 × 60 mm
Picocart64 v2
khill25/Dreamdrive
Open source Retro Rom Carts and ODEs by Dreamcraft Industries
162 parts26 - 2 layers101.6 × 53.3 mm
