6 layers113 × 99 mm
2 layers20 × 20 mm
Onbaording
rsx-electrical/basicsKiCAD2- Size
- 20 × 20 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 3
- Nets
- 3
- Pads
- 6
- Tracks, vias
- 5, 1
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 30 Aug 2025
- Updated
- 19 Sep 2026
Overview
Onbaording is an open-source printed circuit board by rsx-electrical, from the rsx-electrical/basicsKiCAD repository on GitHub. It is a 2-layer board of 20 × 20 mm with 3 parts on 3 nets, routed with 5 tracks and 1 via.
It is built around the CRM2512-FX-2000ELF and LTST-C170TBKT. Its parts include 1 resistor, 1 diode and 1 connector.
Main components
2
CRM2512-FX-2000ELF
2512-55℃~+155℃ 200Ω 2W 300V Thick Film Resistor ±1% ±100ppm/℃ 2512 Chip Resistor - Surface Mount ROHSBournsChip Resistor - Surface Mount
LTST-C170TBKT
0805-20℃~+80℃ 104mcd 130° 20mA 3.3V 465nm~475nm 468nm 76mW Blue Discrete Diode Water Clear 0805 LED Indication - Discrete ROHSLite-OnLED Indication - Discrete
README
README.mdbasicsKiCAD
Parts
3| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 200R_2W | rsx_resistors:R_2512_6332Metric | R1 |
| 1 | LED_B | rsx_leds:LED_0805_2012Metric | D1 |
| 1 | Screw_Terminal_2x2.54 | rsx_headers_screw:Wurth_691210910002 | J1 |
Questions
How big is the Onbaording PCB?
It measures 20 × 20 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Onbaording use?
3 parts, built around the CRM2512-FX-2000ELF and LTST-C170TBKT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Onbaording KiCad files?
From the rsx-electrical/basicsKiCAD repository on GitHub, at the commit this page was made from: the board is Onboarding/Onboarding/Onbaording.kicad_pcb and its schematic Onboarding/Onboarding/Onbaording.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Onbaording design in my own project?
Its repository states no licence, so its author keeps all rights: ask rsx-electrical before reusing the design.
Similar boards
- 4 layers60.6 × 72.3 mm
ESP32
KirtiChickamath/ESP32-IoT-sensor-board
ESP32- IoT sensor board. 4-layer PCB, designed in KiCad . Features LiPo charging, USB-C, SPI flash, SD card, BME280, and more.
90 parts2 - 4 layers89 × 54.5 mm
- 4 layers77.5 × 59.5 mm
IOT
aryan-asit/Telemetry-iot-project
In this project , a 4 layer custom pcb is made for Telematics
85 parts1 - 4 layers96.5 × 54.4 mm
ESP32-IoT
ddennis18/ESP32-IoT-DevBoard
An ESP32-C3 based IoT controller board designed in KiCad. The board combines wireless control, sensor interfaces, local storage, audio/light sensing, USB connectivity, and single-cell Li-ion battery support on a compact…
88 parts1MIT - 4 layers82.9 × 53.8 mm
ESP32 IoT Project
EngMeesh/ESP32_IoT_Dev_Board
A custom 4-layer IoT development board based on the ESP32-C3, featuring integrated LiPo battery management, a CP2102N USB-UART bridge, MicroSD support, and onboard environmental/audio sensors for embedded engineering…
92 parts1MIT - 4 layers213.4 × 138.9 mm
Capstone Project Smart glasses for the visually impaired
heyitsarthur/Capstone-Project-Smart-glasses-for-the-visually-impaired
The system operates on a distributed architecture split between a head-mounted sensor array and a chest-mounted compute module. Main Computing Unit: Raspberry Pi Compute Module 4 (CM4) running on a custom PCB.
197 parts1 - 2 layers158.5 × 60.5 mm
