2 layers106.4 × 95 mm
2 layers271.5 × 81 mm
Starter ortho
RSchneyer/splitish1crappy 4x12 choc ortho board
- Size
- 271.5 × 81 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 99
- Nets
- 70
- Pads
- 508
- Tracks, vias
- 583, 14
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 16 Dec 2019
- Updated
- 20 Oct 2020
Overview
Starter ortho is an open-source printed circuit board by RSchneyer, from the RSchneyer/splitish repository on GitHub, published under the MIT licence. It is a 2-layer board of 271.5 × 81 mm with 99 parts on 70 nets, routed with 583 tracks and 14 vias.
Its parts include 48 diodes and 1 IC. It belongs with the keyboards and input boards and the AVR (ATmega, ATtiny) boards of this library.
README
README.mdsplitish
My first attempt at designing a mechanical keyboard. Split-ish 4x12 ortholinear layout designed for Kailh Choc switches. Rev 1 works, but is far from perfect, so order at your own risk.
version 2 now exists, but I haven't had it fabricated though. Should still work.
Firmware can be found here [blocked]
Made with lots of help from Ai03's PCB design guide
Parts
99| Qty | Value | Footprint | References |
|---|---|---|---|
| 48 | D_Small | Diode_SMD:D_SOD-123 | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +32 |
| 48 | MX-NoLED | Kailh_Choc:KailhChoc-1U | MX1, MX2, MX10, MX11, MX12, MX13, MX14, MX15, MX16, MX17, MX18, MX19, MX20, MX21, MX22, MX23 +32 |
| 1 | LOGO | silkscreen:reid_face | G*** |
| 1 | ProMicro | promicro:ProMicro | U1 |
| 1 | SW_Push | random-keyboard-parts:SKQG-1155865 | RESET |
Questions
How big is the Starter ortho PCB?
It measures 271.5 × 81 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Starter ortho use?
99 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Starter ortho KiCad files?
From the RSchneyer/splitish repository on GitHub, at the commit this page was made from: the board is starter-ortho.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Starter ortho design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers100 × 110 mm
Kicad control board
matthewcieplak/super-sixteen
Code and schematics for the Super Sixteen Eurorack sequencer
99 parts171 - 2 layers66.1 × 62.2 mm
Mimas
numato/samplecode
This repository contains sample code for different Numato Lab products
99 parts144 - 2 layers89.2 × 58.9 mm
8In-8Out LAN9252-only
MetalMusings/MyOwnEtherCATDevice
Documentation accompanying the "Make My Own EtherCAT device" video serie on Youtube.
99 parts93 - 2 layers151.1 × 93.4 mm
- 2 layers
ISA FPGA CPU
robfinch/Cores
Cores ===== RTF's Cores Use at your own risk. Welcome to my galaxy of cores. Contained in the directories are IP cores, source code for digital circuits.
99 parts78 - 2 layers144.8 × 88.9 mm
- 2 layers38 × 65 mm
Spe sink
Scottapotamas/spe-marine-node
Prototype project to build an underwater sensor node, powered by and communicating with the surface via Single Pair Ethernet (10BASE-T1L + 802.3cg)
99 parts34MIT