2 layers116.8 × 30 mm
Type d
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
14 parts3kApache-2.0
2 layers47.2 × 77.5 mm
Terminal strip adaptor
rozap/anesthetic1r a c i n g
- Size
- 47.2 × 77.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 14
- Nets
- 41
- Pads
- 113
- Tracks, vias
- 288, 16
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 1 Apr 2020
- Updated
- 23 Oct 2026
Overview
Terminal strip adaptor is an open-source printed circuit board by rozap, from the rozap/anesthetic repository on GitHub. It is a 2-layer board of 47.2 × 77.5 mm with 14 parts on 41 nets, routed with 288 tracks and 16 vias.
README
README.mdanaesthetic
r a c i n g
Libraries
- https://github.com/avishorp/TM1637
- https://github.com/rlogiacco/CircularBuffer
- RadioHead (see setup, below)
Docs
Oil pressure sensor: autometer 2242 https://www.autometer.com/sensor_specs
RadioHead setup
RadioHead is the library for the LoRa modules. It runs on Aduino boards.
We use RadioHead 1.116, modified to work on 915MHz (there's a call to setFrequency hardcoded in the library source). A pre-modified version is included in this repo. To setup, unzip RadioHead-anesthetic.zip to $HOME/Arduino/libraries.
Radio range test
There is a pair of Arduino sketches for a basic radio range test in radio_range_test. See instructions in sketch comments.
Parts
14| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | Screw_Terminal_01x04 | TerminalBlock_TE-Connectivity:TerminalBlock_TE_282834-4_1x04_P2.54mm_Horizontal | J2, J3, J4, J5, J6, J7, J8, J9, J10, J11 |
| 1 | CONN_EXTRA_5V | TerminalBlock_TE-Connectivity:TerminalBlock_TE_282834-4_1x04_P2.54mm_Horizontal | J13 |
| 1 | CONN_EXTRA_GND | TerminalBlock_TE-Connectivity:TerminalBlock_TE_282834-4_1x04_P2.54mm_Horizontal | J12 |
| 1 | Conn_Speeduino | SpeeduinoConnector:PinSocket_2x20_P2.54mm_Vertical_CounterClockwise | J1 |
| 1 | PROTO_AREA | ProtoAreas:PROTO_AREA_5x5_NO_OUTLINE | J14 |
Questions
How big is the Terminal strip adaptor PCB?
It measures 47.2 × 77.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Terminal strip adaptor use?
14 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Terminal strip adaptor KiCad files?
From the rozap/anesthetic repository on GitHub, at the commit this page was made from: the board is speeduino/terminal_strip_adaptor/terminal_strip_adaptor/terminal_strip_adaptor.kicad_pcb and its schematic cameras/camera ups electrical design/camera ups.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Terminal strip adaptor design in my own project?
Its repository states no licence, so its author keeps all rights: ask rozap before reusing the design.
Similar boards
- 2 layers32 × 22 mm
- 2 layers34 × 45 mm
2032Charger
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
14 parts915 - 2 layers34 × 109.9 mm
- 2 layers45.3 × 42.7 mm
- 2 layers42.5 × 28.8 mm
C5VRX JACK DIY
Twotoz/C5VRX
Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS
14 parts515GPL-3.0 - 2 layers54 × 47 mm
- 2 layers62 × 24 mm
