2 layers
Nrf bga
github-linguist/linguist
Language Savant. If your repository's language is being reported incorrectly, send us a pull request!
12 parts14kMIT
2 layers61 × 34.3 mm
Ground test controller
Rose-Rocketry/ground-test-controllerA simple single-sided PCB for a ground test/launch controller.
- Size
- 61 × 34.3 mm
- Copper layers
- 2
- Thickness
- 1.58 mm
- Parts
- 12
- Nets
- 10
- Pads
- 31
- Tracks, vias
- 46, 0
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 19 Nov 2024
- Updated
- 19 Nov 2024
Overview
Ground test controller is an open-source printed circuit board by Rose-Rocketry, from the Rose-Rocketry/ground-test-controller repository on GitHub, published under the MIT licence. It is a 2-layer board of 61 × 34.3 mm with 12 parts on 10 nets, routed with 46 tracks and 0 vias.
Its parts include 3 switches, 2 capacitors, 2 resistors, 1 IC and 1 diode.
Parts
12| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 10uF | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C1, C2 |
| 1 | 220 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | 510 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2 |
| 1 | Battery | Connector_Wire:SolderWire-0.75sqmm_1x02_P7mm_D1.25mm_OD3.5mm | BT1 |
| 1 | Buzzer | Buzzer_Beeper:Buzzer_12x9.5RM7.6 | BZ1 |
| 1 | Igniter | Connector_Wire:SolderWire-0.75sqmm_1x02_P7mm_D1.25mm_OD3.5mm | LA1 |
| 1 | LM7805_TO220 | Package_TO_SOT_THT:TO-220-3_Vertical | U1 |
| 1 | Orange | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | D1 |
| 1 | PR23-xV-900-1C | Relay_Custom:PR23-xV-900-1C | K1 |
| 1 | SW_Push_LED | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | SW2 |
| 1 | SW_SPST | Connector_Wire:SolderWire-0.75sqmm_1x02_P7mm_D1.25mm_OD3.5mm | SW1 |
Questions
How big is the Ground test controller PCB?
It measures 61 × 34.3 mm and has 2 copper layers, 1.58 mm thick.
What parts does the Ground test controller use?
12 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Ground test controller KiCad files?
From the Rose-Rocketry/ground-test-controller repository on GitHub, at the commit this page was made from: the board is ground-test-controller.kicad_pcb and its schematic ground-test-controller.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Ground test controller design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers66.9 × 74.5 mm
- 2 layers40 × 15 mm
Sensors
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
12 parts3kApache-2.0 - 2 layers42.7 × 56.5 mm
- 2 layers26 × 16.9 mm
- 2 layers49 × 25 mm
5v boost regulator
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
12 parts915 - 2 layers28.3 × 10.3 mm
Tap Photosensor PCB
VoronDesign/Voron-Tap
Tap is a nozzle-based z-probe for the V2 and Trident printer designs. The entire toolhead moves to trigger an optical switch. Tap offers many advantages:
12 parts716GPL-3.0 - 2 layers25.4 × 70.4 mm
Tpmsniffer
stacksmashing/pico-tpmsniffer
A simple, very experimental TPM sniffer for LPC bus
12 parts696