
Numpad project
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

The DIYkey a hardware token that stores one static password. This repo will contain all the information you need if you want to build your own token.
Key is an open-source printed circuit board by rosatolen, from the rosatolen/DIYkey repository on GitHub. It is a 2-layer board with 64 parts on 9 nets, routed with 320 tracks and 0 vias.
Its parts include 8 ICs, 8 diodes, 8 connectors and 8 switches. It belongs with the AVR (ATmega, ATtiny) boards of this library.
The DIYkey a hardware token that stores one static password. This repo will contain all the information you need if you want to build your own token.
One of our goals is to keep the cost of materials low. Initially we created the first prototype with around 7 USD but the goal was to make large batch assembly cost as close to $1 as possible.
You will need:
WARNING
You should not solder the ATTiny85 to a permaproto board before programming it
unless you have clips to easily help you install software once it has been
placed.Use the below image to connect the hardware materials. Double check that the diode polarity is correct.

make depscd micronucleus/firmware/makemake bootflashcd micronucleus/commandline/makefind / -name DigisparkKeyboard 2>/dev/nullarduino\_code/DIYkey/DIYkey program in Arduinomake programflash| Qty | Value | Footprint | References |
|---|---|---|---|
| 32 | R | Resistors_SMD:R_1206 | 1.5k1, 1.5k1, 1.5k1, 1.5k1, 1.5k1, 1.5k1, 1.5k1, 1.5k1, 1.5k2, 1.5k2, 1.5k2, 1.5k2, 1.5k2, 1.5k2, 1.5k2, 1.5k2 +16 |
| 8 | ATTINY85-P | SOIC127P600X175-8N:SOIC127P600X175-8N | IC1, IC1, IC1, IC1, IC1, IC1, IC1, IC1 |
| 8 | LED | LEDs:LED_0402 | D3, D3, D3, D3, D3, D3, D3, D3 |
| 8 | SW_PUSH | Buttons_Switches_SMD:SW_SPST_FSMSM | SW1, SW1, SW1, SW1, SW1, SW1, SW1, SW1 |
| 8 | USB_A | kicad_files:usb-PCB | P1, P1, P1, P1, P1, P1, P1, P1 |

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

drandyhaas/KiCadRoutingTools
A set of Python/Rust tools to aid routing in KiCad

BlueSCSI/BlueSCSI-v2
BlueSCSI v2/Ultra - an open source, open hardware, SCSI emulator using the Pi Pico PR2040 and Pico 2 RP2350



PyrooL/Alpha
A 28-key semi-ortholinear mechanical keyboard designed by PyroL

ugcs/ddc
Drone Show Software is software designed for drone shows, allowing flight path planning as well as control of dozens of drones simultaneously in a synchronized manner.

64 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the rosatolen/DIYkey repository on GitHub, at the commit this page was made from: the board is kicad_files/key.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask rosatolen before reusing the design.