Skip to the content
2 layers22 × 18 mmNtr subcard, the printed circuit board in 3D

Clone of NTR eeprom subcard

Size
22 × 18 mm
Copper layers
2
Thickness
1.6 mm
Parts
6
Nets
18
Pads
68
Tracks, vias
123, 60
Pours
5
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
21 Nov 2024
Updated
17 Jun 2025

Overview

Ntr subcard is an open-source printed circuit board by rosaage, from the rosaage/ntr-subcard repository on GitHub. It is a 2-layer board of 22 × 18 mm with 6 parts on 18 nets, routed with 123 tracks and 60 vias.

It is built around the M45PE20-VMN6P and M95512-WMN6P. Its parts include 2 capacitors, 2 ICs, 1 resistor and 1 connector.

Main components

2

README

README.md

ntr-subcard

Clone of NTR eeprom subcard

For eeprom/flash selection: https://gbatemp.net/threads/ds-cartridge-replacement-save-chips.646745/

Connector: Molex SlimStack 2x20 P0.50mm - 53748-0408

Changes

At least when looking on aliexpress a wide version of U2 is a lot more common and cheap, so I extended the footprint to support M45PE40-VMW6TG (4 Mbit Flash) and similar chips.

Production 512 kbit eeprom

A finished PCB can be ordered from JLCPCB by uploading the Gerbers.zip file and checking the PCB Assembly option. BOM.csv and CPL.csv will need to be uploaded for the assembly. This is set to use U1 as a 512 kbit eeprom chip, as this version was cheap and in stock at jlcpcb. By modifiying BOM.csv before uploading a different part can be selected (also possible on the website after uploading). It is also possible to order it with only the connector and passives and solder on U1 or U2 manually.

Production 2/4 Mbit Flash

I have not looked into a suitable part for U2 from JLCPCB, but I made CPL files for the coordinates for both wide and slim variants:

  • Wide 208 mil: CPL-U2-wide.csv
  • Slim 150 mil: CPL-U2-slim.csv

Finished boards from JLCPCB

Future revisions

While I don't have any plans to make a new revision right now I have some things I would like to add. By moving the CE pins from flash/eeprom to a SPDT switch and adding a second pull-up it would be possible to have one card with both eeprom and flash at the same time. A set of solder bridge pads or pads for 0-ohm resistors would also be a quick option if no suitable switch can be sourced.

Parts

6
QtyValueFootprintReferences
2100nCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC1, C2
110kResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR1
1M45PE20-VMN6Ptage:SOIC-8_3.9x3.9-7.62mm_P1.27mmU2
1M95512-WMN6PPackage_SO:TSSOP-14_4.4x5mm_P0.65mmU1
1Molex_SlimStack_53748-0408_2x20_P0.50mmtage:Molex_SlimStack_53748-0408_2x20_P0.50mm_Vertical-tageCN1

Similar boards

  • 2 layers114.5 × 100.5 mmDZZY, the printed circuit board in 3D

    DZZY

    KarlK90/DZZY

    Barebones 5x6 Gamepad with thumb keys using Kailh Choc V1 switches.

    96 parts1
  • 2 layers18.5 × 11.1 mmSwitch, the printed circuit board in 3D

    Switch

    byrantech/laptop

    anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

    6 parts4.3kMIT
  • 2 layers14.6 × 33 mmBrain board SD Card 1, the printed circuit board in 3D

    Brain board SD Card 1

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    6 parts1.2k
  • 2 layers9 × 9 mmDpoint, the printed circuit board in 3D

    Dpoint

    Jcparkyn/dpoint

    Open-source digital stylus using camera tracking and inertial measurements

    6 parts1.1kMIT
  • 2 layers51.5 × 16.6 mmMicroswitchXY Endstop, the printed circuit board in 3D

    MicroswitchXY Endstop

    VoronDesign/Voron-Hardware

    Cool Hardware designed by the Voron Design group

    6 parts1.1kGPL-3.0
  • 2 layers21.9 × 76.7 mmAmiga External, the printed circuit board in 3D

    Amiga External

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    6 parts1kGPL-3.0
  • 2 layers88.9 × 50.8 mmBusinesscard, the printed circuit board in 3D

    Businesscard

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    6 parts915
  • 2 layers20.3 × 15.2 mmL0 RGB led, the printed circuit board in 3D

    L0 RGB led

    Luos-io/luos_engine

    Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

    6 parts546MIT

Questions

How big is the Ntr subcard PCB?

It measures 22 × 18 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Ntr subcard use?

6 parts, built around the M45PE20-VMN6P and M95512-WMN6P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Ntr subcard KiCad files?

From the rosaage/ntr-subcard repository on GitHub, at the commit this page was made from: the board is NTR-Subcard.kicad_pcb and its schematic NTR-Subcard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Ntr subcard design in my own project?

Its repository states no licence, so its author keeps all rights: ask rosaage before reusing the design.